1. Bubuka jeung Leuwihview
This manual provides essential information for the proper installation, operation, and maintenance of your QSC AD-C6T-WH 6.5-inch ceiling-mount speaker. The AD-C6T-WH is a two-way surface speaker designed for professional audio applications, featuring a 70/100V transformer with a 16-ohm bypass and 135-degree conical DMT coverage. It is engineered for blind mount installations using the included C-ring and rails.
Gambar 1: Hareupeun view of the QSC AD-C6T-WH speaker.
2. Émbaran Kasalametan
Please read and understand all safety instructions before installing or operating this product. Failure to do so may result in injury or damage to the equipment.
- Personil anu mumpuni: Installation should only be performed by qualified personnel familiar with local building codes and wiring practices.
- Pegatkeun daya: Ensure all power to the installation area is disconnected before beginning any wiring or installation procedures.
- Pamasangan Aman: Always ensure the speaker is securely mounted to a structurally sound ceiling or support system to prevent falling.
- Wiring: Use appropriate gauge wiring for speaker connections and ensure all connections are secure and insulated.
- Kaayaan Lingkungan: Do not expose the speaker to excessive moisture or extreme temperatures. This product is not waterproof.
3. Eusi Paket
Pastikeun yén sadaya item anu didaptarkeun di handap aya dina pakét anjeun:
- QSC AD-C6T-WH 6.5-inch Ceiling-Mount Speaker (quantity as purchased)
- C-ring and tile rails
- Rail screws
- Panyambung Euroblock
- Cut-kaluar template
- Tether grille
4. Setup jeung Instalasi
The QSC AD-C6T-WH speaker is designed for blind mount installation in ceilings. Follow these general steps for proper setup:
- Penempatan Rencana: Determine the optimal location for speaker placement, considering acoustic coverage and structural integrity of the ceiling.
- Nyiapkeun bubuka: Use the provided cut-out template to mark and create the necessary opening in the ceiling. Ensure the opening size is accurate to allow for proper speaker fit and secure mounting.
- Pasang Hardware Pasang: Insert the C-ring and tile rails through the ceiling opening. Secure them according to the specific instructions provided with the mounting hardware, using the rail screws. This hardware provides a secure anchor for the speaker.
- Sambungan Wiring:
- Sambungkeun kabel speaker ti Anjeun amplifier kana konektor Euroblock.
- For 70V/100V constant voltage systems, select the appropriate tap setting on the speaker's transformer.
- For low impedance applications, bypass the transformer and connect directly to the 16-ohm input.
- Ensure correct polarity (+ to + and - to -) for all connections.
- Pasang Spiker: Carefully insert the speaker into the ceiling opening, aligning it with the C-ring and tile rails. Secure the speaker by tightening the mounting clamps, ensuring a snug fit without over-tightening.
- Pasang grille: Attach the tether grille to the speaker. The grille is typically magnetic or uses a friction fit.
Gambar 2: Sisi view illustrating the speaker's mounting mechanism and connection points.
5. Parentah Operasi
Once properly installed and wired, operating your QSC AD-C6T-WH speaker is straightforward:
- Nyambung ka Amppanguat: Ensure the speaker is correctly connected to a suitable audio amplifier atawa panarima.
- Daya Hurung: Hurungkeun audio anjeun amppangagung.
- Puteran Audio: Begin playing audio through your connected source. Adjust the volume level on your ampnepi ka tingkat déngékeun anu dipikahoyong.
- Kasaluyuan Kontrol Sora: While the speaker itself is passive, it is compatible with voice control systems when integrated into an audio setup that includes a voice-controlled amplifier or media player. Refer to your amplifier's manual for voice control setup.
6. Pangropéa
The QSC AD-C6T-WH speaker requires minimal maintenance to ensure long-term performance:
- beberesih: Periodically wipe the speaker grille and visible surfaces with a soft, dry cloth. Do not use harsh chemicals or abrasive cleaners.
- Pamariksaan: Occasionally inspect the speaker for any signs of physical damage or loose connections.
- Henteu aya Bagian anu Bisa Dilayanan Pamaké: There are no user-serviceable parts inside the speaker. Do not attempt to open or repair the unit yourself. Refer all servicing to qualified service personnel.
7. Cara ngungkulan
If you encounter issues with your QSC AD-C6T-WH speaker, refer to the following common troubleshooting steps:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya sora tina speaker |
|
|
| Kualitas sora anu menyimpang atanapi goréng |
|
|
8. Spésifikasi
Key technical specifications for the QSC AD-C6T-WH speaker:
| Ngaran modél | AD-C6T-WH |
| Tipe Speaker | Woofer (Two-way surface speaker) |
| Tipe Pamasangan | Gunung siling |
| Diaméterna Woofer | 6.5 inci (165 milimeter) |
| Téhnologi konektipitas | Coaxial |
| Mode Kaluaran Audio | Stereo (when paired) |
| Speaker Maksimum Kaluaran Power | 60 Watt |
| Masukan Voltage | 100 Volts (for 100V line systems) |
| Bahan | logam |
| Item Beurat | 27.2 pounds (per pair, as sold) |
| Ukuran Paket | 29 x 15 x 13 inci |
| Komponén Kaasup | C-ring and tile rails, rail screws, euroblock connector, cut-out template, tether grille |
| Nyaéta Waterproof | PALSU |
| Métode kontrol | Voice (via compatible external systems) |
9. Émbaran jaminan
The QSC AD-C6T-WH speaker is covered by a Garansi kawates. For specific terms, conditions, and duration of the warranty, please refer to the official warranty documentation provided with your purchase or visit the QSC websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.
10. Rojongan
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact QSC customer support. You can find contact information and additional resources on the official QSC website or through your authorized QSC dealer.
Sumberdaya Online: Visit the QSC Store on Amazon
