Legrand 1597TRW Tamper Resistant GFCI Wall Outlet User Manual

Bubuka

This manual provides detailed instructions for the safe installation, operation, and maintenance of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This device is part of the radiant collection, designed to offer reliable electrical protection in residential and commercial environments. Please read these instructions thoroughly before beginning installation or use.

Émbaran Kasalametan

WARNING: Risk of electric shock. May cause serious injury or death. Turn off power at the circuit breaker or fuse box before installation.

Salawasna pegatkeun sambungan kakuatan dina panel layanan saméméh gawé bareng kabel listrik.
Installation must be performed by a qualified electrician or in accordance with all local and national electrical codes.
Entong dipasang di tempat anu baseuh kecuali dipeunteun khusus pikeun panggunaan sapertos kitu.
Pastikeun sadaya sambungan kabel aman sareng insulated leres.
Test the GFCI outlet monthly to ensure proper operation.

Eusi pakét

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

Legrand 1597TRW Tamper Resistant GFCI Wall Outlet (White)
Pamasangan screws
Manual Pitunjuk (dokumén ieu)

Note: A screwless wall plate is not included and must be purchased separately.

Pamasangan

Follow these steps for proper installation of your GFCI outlet:

Pareuman Daya: Locate the circuit breaker or fuse that supplies power to the outlet box. Turn it off completely. Verify power is off using a voltage panguji.
Hapus Outlet Lama: Carefully remove the existing wall plate and outlet from the electrical box. Disconnect the wires from the old outlet, noting which wires were connected to the "LINE" and "LOAD" terminals.
Identipikasi Kawat:
- LINE Wires: These wires bring power from the circuit breaker to the GFCI outlet.
- LOAD Wires: These wires carry power from the GFCI outlet to other downstream receptacles or devices that you want to protect. If there are no downstream receptacles, cap the LOAD wires individually.
- Kawat taneuh: Ilaharna bulistir tambaga atawa héjo insulated.
Connect Wires to GFCI:
- Nyambungkeun GARIS wires to the terminals marked "LINE" on the GFCI outlet.
- Nyambungkeun MUAT wires to the terminals marked "LOAD" on the GFCI outlet.
- Nyambungkeun kawat taneuh to the green ground screw.
penting: The Legrand 1597TRW features a feed-thru wiring configuration that allows the GFCI to protect downstream receptacles. It also prevents line-load reversal miswire, meaning there will be no power to the face or downstream receptacles if wired incorrectly. An auto-ground clip assures a positive ground to a metal box.
Pasang Stopkontak: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided mounting screws.
Pasang Plat Tembok: Attach the screwless wall plate (not included) over the GFCI outlet.
Mulangkeun Daya: Hurungkeun deui kakuatan dina circuit breaker.

Gambar: Hareupeun view of the Legrand 1597TRW Tamper Resistant GFCI Wall Outlet. This image shows the two tamper-resistant receptacles, the TEST button (black), and the RESET button (red).

Operasi

The GFCI outlet is designed to protect against electrical shock by quickly shutting off power if a ground fault is detected.

Tombol RESET: After installation or a power outage, press the red RESET button to restore power to the outlet.
Tombol TEST: Press the black TEST button to simulate a ground fault. The GFCI should trip, and power to the outlet will be cut off. This confirms the GFCI is functioning correctly.

Ujian Bulanan:

It is recommended to test your GFCI outlet monthly to ensure it is providing continuous protection. To test:

Colokkeun alamp or other device into the GFCI outlet and turn it on.
Press the black TEST button. The lamp should turn off, and the red RESET button should pop out.
Press the red RESET button. The lamp kudu hurung deui.
Lamun lamp does not turn off or on as described, the GFCI may be faulty and should be replaced.

Pangropéa

The Legrand 1597TRW GFCI outlet requires minimal maintenance. Regular testing is the primary maintenance procedure.

Keep the outlet clean and free from dust and debris.
Do not paint over the GFCI outlet or its buttons, as this can impair operation.
If the GFCI trips frequently without an apparent cause, consult a qualified electrician to inspect your wiring.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
GFCI moal ngareset.	No power to the GFCI. Kasalahan taneuh dideteksi. Line-load reversal miswire. Faulty GFCI.	Pariksa circuit breaker. Unplug all devices from the GFCI and downstream outlets. Try to reset. If it resets, plug devices back in one by one to identify the faulty device. Verify wiring connections (LINE to LINE, LOAD to LOAD). Replace the GFCI.
GFCI lalampahan remen.	Faulty appliance/device. Moisture in the circuit. Kabel anu ruksak.	Identify and remove the faulty appliance. Ensure the environment is dry. Taroskeun ka tukang listrik anu mumpuni pikeun mariksa kabel.
Taya kakuatan ka stop kontak.	GFCI tripped. Pamutus sirkuit kasasar. Kabel salah.	Pencét tombol RESET. Pariksa jeung ngareset circuit breaker. Pariksa sambungan kabel.

spésifikasi

model: 1597TRW
merek: Legrand
warna: Bodas
Amperage: 15 Amps
Voltage: 125 volt
Total Outlet Daya: 2
Tipe Panyambung: Nema 5-15
Bahan: logam
Fitur: Tamper Resistant, Auto-Ground Clip, Feed-Thru Wiring, Line-Load Reversal Miswire Prevention
UPC: 680147085438
ASIN: B079LTP7Y5

Garansi sareng Rojongan

Legrand products are designed and manufactured to the highest quality standards. For specific warranty information, please refer to the documentation included with your purchase or visit the official Legrand website. For technical support or further assistance, please contact Legrand customer service.

Contact information for Legrand can typically be found on their official websitus atanapi bungkusan produk.

Legrand 1597TRW