Astralpool Aster 99- Sand Filter with Valve (Ø 500) - Instruction Manual

1. Produk Langkungview

The Astralpool Aster 99- Sand Filter is a high-performance filtration system designed for swimming pools. Constructed from laminated polyester and fiberglass, this filter ensures durability and efficient water purification. It features a lateral selector valve, a manometer for pressure monitoring, and a drain valve for easy water emptying. This manual provides essential information for the safe and effective installation, operation, and maintenance of your filter.

• Pangwangunan: Laminated polyester and fiberglass for enhanced durability.
• komponén: Equipped with a manometer, drain valve, and lateral selector valve.
• Tekanan Gawe Maksimum: 2.5 kg/cm².
• Maximum Filtration Capacity: 50 m³/h/m².

2. Setup jeung Instalasi

Proper installation is crucial for the optimal performance and longevity of your Astralpool Aster 99- Sand Filter. Ensure all connections are secure and watertight.

2.1. Pamilihan Loka

Choose a level, solid surface for the filter, preferably close to the pool pump and the pool itself. The location should be protected from direct sunlight and adverse weather conditions, and allow sufficient space for maintenance and operation.

2.2. Majelis Filter

1. Pasang saringan: Place the filter tank on its designated base.
2. Tambahkeun Media Filter: Carefully fill the filter tank with the appropriate amount and type of filter sand (or other media) as recommended by Astralpool. Ensure the central pipe is protected during this process to prevent sand from entering it.
3. Pasang Katup Multi-Port: Attach the lateral selector valve to the top of the filter tank. Ensure the O-ring is correctly seated and the clamp geus aman fastened.
4. Sambungkeun Pipa: Connect the pump outlet to the "PUMP" port on the valve, the pool return line to the "RETURN" port, and the waste line to the "WASTE" port. Use appropriate fittings and sealants to prevent leaks.
5. Pamasangan Manometer: Screw the manometer into its designated port on the multi-port valve.
6. Solokan Solokan: Ensure the drain valve at the bottom of the filter is closed.

Gambar 1: Technical drawing of the Astralpool Aster 99- Sand Filter, illustrating key dimensions (D, H, M, N, K) and overall structure. This diagram helps in understanding the physical layout and connection points of the filter.

3. Parentah Operasi

The multi-port valve controls the filter's operation. Always turn off the pump before changing the valve position to prevent damage.

3.1. Valve Positions

• FILTER: Modeu filtrasi normal. Cai ngalir ngaliwatan média filter teras balik deui ka kolam renang.
• BACKWASH: Cleans the filter media by reversing water flow. Water is discharged through the waste line.
• Bilas: Used after backwashing to settle the filter media and flush out any remaining debris from the waste line.
• RUNTAH/SORONG: Bypasses the filter, sending water directly to the waste line. Useful for vacuuming heavy debris or lowering pool water level.
• RECIRCULATE: Bypasses filter nu, sirkulasi cai langsung deui ka kolam renang. Mangpaat pikeun distribusi kimiawi tanpa filtration.
• TUTUP: Shuts off all flow to the filter and pool. Use for pump maintenance or when the filter is not in use.

3.2. Mimitian Mimiti

1. Ensure the filter is filled with sand and all connections are secure.
2. Setel klep multi-port ka posisi "BACKWASH".
3. Turn on the pump and backwash for 2-3 minutes, or until the water in the sight glass (if present) runs clear.
4. Pareuman pompa.
5. Set the valve to the "RINSE" position.
6. Turn on the pump and rinse for 30-60 seconds.
7. Pareuman pompa.
8. Set the valve to the "FILTER" position.
9. Turn on the pump. The filter is now operating in normal filtration mode.

4. Pangropéa

Regular maintenance ensures efficient filtration and extends the life of your Astralpool Aster 99- Sand Filter.

4.1. Backwashing

Backwash the filter when the pressure gauge reading is 0.2-0.3 kg/cm² (3-5 psi) above the clean filter's starting pressure, or when pool water clarity decreases.

1. Pareuman pompa.
2. Setel klep multi-port ka "BACKWASH".
3. Turn on the pump and backwash until the water in the sight glass runs clear (typically 2-3 minutes).
4. Pareuman pompa.
5. Set the valve to "RINSE".
6. Turn on the pump and rinse for 30-60 seconds.
7. Pareuman pompa.
8. Set the valve to "FILTER".
9. Hurungkeun pompa pikeun neruskeun filtrasi normal.

4.2. Ngajaga usum tiris (upami aya)

In colder climates, proper winterization is essential to prevent freeze damage.

• Drain all water from the filter tank by opening the drain valve.
• Remove the manometer and store it in a warm, dry place.
• Set the multi-port valve handle between two positions (e.g., between "FILTER" and "CLOSED") to relieve pressure on the internal seal.
• Disconnect all plumbing and store pipes if necessary.

5. Cara ngungkulan

Bagian ieu alamat masalah umum anjeun bisa sapatemon jeung filter keusik Anjeun.

6. Spésifikasi Téknis

Detailed specifications for the Astralpool Aster 99- Sand Filter (Ø 500 model).

• model: Aster 99- Ø 500
• Bahan Konstruksi: Laminated Polyester and Fiberglass
• Jenis klep: Lateral Selector Valve
• Asesoris kaasup: Manometer, Drain Valve
• Tekanan Gawe Maksimum: 2.5 kg/cm²
• Maximum Filtration Capacity: 50 m³/h/m²

6.1. Dimensions (for Ø 500 model)

Note: Dimensions are approximate and subject to manufacturing tolerances. Refer to Figure 1 for visual representation of dimensions.

7. Émbaran jaminan

Specific warranty details for Astralpool products are typically provided at the point of purchase or within separate warranty documentation. Please retain your proof of purchase for any warranty claims. For detailed warranty terms and conditions, refer to the official Astralpool websitus atanapi hubungi dealer resmi anjeun.

8. Rojongan Palanggan

For technical assistance, spare parts, or further inquiries regarding your Astralpool Aster 99- Sand Filter, please contact your local Astralpool dealer or visit the official Astralpool websitus.

Astralpool Official Websitus: www.astralpool.com