StarTech.com RKCONS1901

StarTech.com RKCONS1901 1U Rackmount KVM Console User Manual

model: RKCONS1901 | merek: StarTech.com

1. Bubuka

The StarTech.com RKCONS1901 is a 1U rack-mount KVM console designed to provide complete keyboard, monitor, and mouse control for a single server or multiple servers when connected through a separate KVM switch (sold separately). This space-efficient solution features a built-in 19-inch LCD display, a full keyboard, and a touchpad, all housed within a durable steel drawer that slides into 1U of rack space.

2. Naon dina Box

  • Konsol KVM
  • 6 ft [1.8 m] KVM cable
  • kacangan kandang M5
  • M5 sekrup

3. Setup jeung Instalasi

Follow these steps to properly install your StarTech.com RKCONS1901 KVM Console into a server rack and connect it to your equipment.

3.1 Rak Pamasangan

The KVM console is designed to fit into a standard 1U rack space. Ensure your rack has sufficient depth and mounting points.

  1. Slide the KVM console into the desired 1U rack space.
  2. Secure the console to the rack using the provided M5 cage nuts and M5 screws. Ensure both sides are firmly attached to prevent movement.
StarTech.com RKCONS1901 KVM Console in closed position, ready for rack mounting.

Figure 1: KVM Console in closed position, ready for rack mounting.

3.2 Nyambungkeun Kabel

Connect the necessary cables to the rear of the KVM console and your server or KVM switch.

  1. Connect the provided 6 ft [1.8 m] KVM cable to the single port on the rear of the KVM console.
  2. Connect the other end of the KVM cable to the VGA and USB ports of your server or KVM switch.
  3. Connect the power cable to the KVM console and a power outlet.
Tukangeun view of the StarTech.com RKCONS1901 KVM Console showing VGA, USB, and power ports.

Gambar 2: Tukangeun view of the KVM Console with connection ports.

3.3 Installation Video Reference

For a visual guide on the installation process, refer to the following video:

Video 1: This video demonstrates the installation of a 19-inch Rack Mount VGA KVM Console into a server rack, showing the physical mounting and initial setup steps.

4. Parentah Operasi

Once installed and connected, the KVM console is ready for operation.

4.1 Opening and Closing the Console

  1. To open the console, pull the handle to slide the drawer out of the rack.
  2. Lift the LCD panel to an upright position.
  3. To close, fold down the LCD panel and push the drawer back into the rack until it locks securely.
StarTech.com RKCONS1901 KVM Console in open position, showing the 19-inch LCD monitor, keyboard, and touchpad.

Figure 3: KVM Console in open position, ready for use.

4.2 Nganggo kibor sareng Touchpad

The integrated keyboard features 99 keys, including a numeric keypad, and the touchpad provides intuitive cursor control.

4.3 Napigasi Menu OSD

The On-Screen Display (OSD) menu allows you to adjust monitor settings such as brightness, contrast, and color. Use the buttons located below the LCD panel to navigate the OSD menu.

Video 2: This video provides an introduction to a rack mount KVM monitor switch, demonstrating its basic operation, OSD menu navigation, and switching capabilities.

5. Pangropéa

To ensure the longevity and optimal performance of your KVM console, follow these maintenance guidelines:

  • beberesih: Use a soft, lint-free cloth to clean the LCD screen and exterior surfaces. For stubborn marks, dampen the cloth with a mild, non-abrasive cleaner. Avoid spraying liquids directly onto the console.
  • Ventilasi: Ensure proper airflow around the console. Do not block ventilation openings.
  • Manajemén Kabel: Keep cables neatly organized to prevent damage and ensure smooth operation of the sliding drawer.
  • Kaayaan Lingkungan: Operate the console within the specified temperature range of 0 to 40 degrees Celsius.

6. Cara ngungkulan

If you encounter issues with your KVM console, refer to the following common troubleshooting steps:

  • Henteu aya tampilan: Check all video cable connections. Ensure the server or KVM switch is powered on and outputting a video signal. Verify the console's power adapter is securely connected.
  • Kibor/Beurit Teu Ngabales: Check all USB cable connections. Ensure the server or KVM switch recognizes the USB devices. Try connecting the KVM cable to a different USB port on the server/switch.
  • Console Not Sliding Smoothly: Inspect the slide rails for any obstructions or damage. Ensure the rack mounting screws are not overtightened, which could impede movement.
  • Incorrect Display Resolution: Access the OSD menu to adjust display settings. Ensure your server's video output is configured to a resolution supported by the 19-inch LCD (up to 1280x1024).

7. Spésifikasi

FiturSpésifikasi
Nomer modélRKCONS1901
merekStarTech.com
Jangkungna rak1U
Ukuran tampilan19 inci
Tipe tampilanActive Matrix TFT LCD
Resolusi Max1280x1024
kibor99-key full keyboard with numeric keypad
Alat nunjukTouchpad
Video PanganteurVGA
Rojongan USBSumuhun
Suhu Operasi0 nepi ka 40 darajat Celsius
MTBF50,000 jam
Ukuran produk (L x W x H)21 x 19 x 1.7 inci
Item Beurat26.8 pon

8. Garansi jeung Rojongan

The StarTech.com RKCONS1901 is backed by a StarTech.com warranty. For specific warranty details and technical support, please refer to the official StarTech.com websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun pikeun klaim jaminan.

Dokumén Patali - RKCONS1901

Praview StarTech.com 4/8/16 Port 1U Rak Gunung VGA USB KVM Switch sareng OSD - Manual Pangguna
Detailed user manual for the StarTech.com 4/8/16 Port 1U Rack Mount VGA USB KVM Switch with OSD (models SV431DUSBU, SV831DUSBU, SV1631DUSBU). Learn about installation, operation, OSD features, specifications, and technical support.
Praview StarTech.com 8-Port Rackmount KVM Pindah - 4K 60Hz Manual pamaké
Manual pamaké pikeun StarTech.com R8AD122-KVM-SWITCH / R8AH202-KVM-SWITCH 8-Port Rackmount KVM Pindah. Nyadiakeun parentah lengkep dina instalasi, nyambungkeun konsol jeung PCS, sarta ngagunakeun paréntah hotkey pikeun operasi 4K 60Hz.
Praview StarTech.com 4/8/16 Port 1U Rak Gunung Saklar KVM USB VGA sareng Manual Pangguna OSD
Buku pituduh ieu nyayogikeun inpormasi lengkep ngeunaan StarTech.com 4/8/16 Port 1U Rack Mount USB VGA KVM Switch sareng OSD, kalebet pamasangan, operasi, spésifikasi, sareng dukungan téknis.
Praview StarTech.com SV441DUSBI / SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP kalayan File Transfer Pamaké Manual
Buku pituduh pikeun StarTech.com SV441DUSBI sareng SV841DUSBI 4/8-Port Enhanced Digital USB KVM Switch Over IP kalayan File Transfer. Diajar ngeunaan pamasangan, konfigurasi, operasi, manajemen jarak jauh, sareng ngungkulan masalah.
Praview StarTech.com SV231DVIUDDM & SV431DVIUDDM: 2 & 4 Port DVI USB KVM Switch User Manual
User manual for StarTech.com SV231DVIUDDM (2-port) and SV431DVIUDDM (4-port) DVI USB KVM Switches with DDM. Covers installation, operation, specifications, hot-key functions, technical support, and warranty information.
Praview StarTech.com ADJSHELFHD/ADJSHELFHDV 1U Adjustable High Load Fixed Rackmount Shelf - Installation and Specifications
Learn how to install and use the StarTech.com ADJSHELFHD and ADJSHELFHDV 1U adjustable high load fixed rackmount shelves. This guide covers installation steps, included accessories, and technical specifications for these durable server rack shelves.