1. Bubuka
The Superior Electronics Simply SUPTLB001 is a universal remote control designed for ease of use and simplicity. It features a self-learning function, allowing it to acquire commands directly from your original remote controls. This remote is capable of controlling up to two different devices, such as a television and a set-top box, making it an ideal solution for consolidating your remote controls. Its design prioritizes large, clearly identifiable buttons for comfortable operation.
2. Fitur Produk
- Kasaluyuan Universal: Controls a wide range of devices.
- Fungsi Diajar Mandiri: Easily acquires commands from existing remote controls.
- Two-Device Control: Manages up to two separate electronic devices.
- Tombol badag: Designed with oversized, clearly marked buttons for enhanced usability.
- Desain intuitif: Simple layout for straightforward operation.
- Quick Programming: Learning process typically takes less than one minute per button.
3. Setélan
3.1. Pamasangan batré
The Superior Electronics Simply SUPTLB001 remote control requires two (2) AAA batteries (not included) for operation.
- Teangan tempat panutup kompartemen batré dina tonggong kadali jauh.
- Geser panutup ka handap atawa pencét kancing jeung angkat pikeun muka.
- Selapkeun dua batré AAA, mastikeun terminal positif (+) jeung négatip (-) align bener jeung markings jero kompartemen nu.
- Ganti panutup kompartemen batré, geser deui kana tempatna nepi ka klik aman.
Image: Back of the remote control, indicating the battery compartment.
3.2. Learning Function Programming
The Simply SUPTLB001 remote learns functions directly from your original remote controls. You can program any button on the Simply remote to perform a function from your original remote.
- Prepare Remotes: Place the Simply SUPTLB001 remote and your original remote control on a flat surface, facing each other, with their infrared (IR) emitters aligned and approximately 1-3 cm apart.
- Lebetkeun Modeu Diajar: Pencét jeung tahan tombol POWER button on the Simply remote for approximately 5 seconds until the red indicator light (usually near the power button) illuminates steadily. This indicates the remote is in learning mode.
- Select Device (A or B): If you are programming for Device A, press the A button. If for Device B, press the B button. The indicator light may flash to confirm selection.
- Select Button to Learn: Press the button on the Simply remote that you wish to program (e.g., V+ for Volume Up). The indicator light will start flashing slowly, waiting for a signal.
- Sinyal Pangiriman: Press and hold the corresponding button on your original remote control (e.g., Volume Up) until the indicator light on the Simply remote flashes rapidly three times and then remains steady. This signifies successful learning.
- Balikan deui pikeun tombol-tombol anu sanés: Repeat steps 4 and 5 for all other buttons you wish to program for the current device.
- Kaluar tina Modeu Diajar: Once all desired buttons are programmed, press the POWER button on the Simply remote again to exit learning mode. The indicator light will turn off.
Catetan: If the indicator light flashes rapidly and then turns off without remaining steady, the learning process for that button may have failed. Ensure the remotes are properly aligned and try again. Some original remotes may require a longer press to transmit the signal effectively.
Gambar: Hareupeun view of the Simply SUPTLB001 remote control.
4. Parentah Operasi
After successful programming, you can use your Simply SUPTLB001 remote control to operate your devices.
- Pilihan Alat: Pencét éta A button to control the first programmed device or the B button to control the second programmed device. The indicator light may briefly flash to confirm the selected device.
- Hurungkeun/Pareuman: Pencét éta POWER tombol pikeun ngahurungkeun atawa mareuman alat nu dipilih.
- Kontrol volume: Ngagunakeun éta V+ tombol pikeun ngaronjatkeun volume na V- pikeun ngirangan polumeu.
- Program/Channel Control: Ngagunakeun éta P+ button to go to the next program/channel and P- to go to the previous program/channel.
- Input AV: Pencét éta AV button to switch between video input sources on your television.
The functionality of each button depends on how it was programmed during the learning process.
5. Pangropéa
- beberesih: To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or alcohol, as these can damage the surface.
- Ngagantian batré: Replace batteries when the remote's performance degrades or the indicator light does not respond as expected. Always replace both AAA batteries at the same time with new ones.
- Panyimpenan: Simpen remote dina tempat anu garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
6. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Jauh teu jalan. | Batré pareum atawa salah dipasang. | Ganti batré ku batré AAA anyar, mastikeun polaritasna bener. |
| Learning function fails (indicator light flashes rapidly and turns off). | Remotes not aligned, too far apart, or original remote signal is weak. | Ensure remotes are 1-3 cm apart and IR emitters are aligned. Press and hold the original remote button firmly. Try again. |
| Programmed button does not control the device. | Button was not programmed correctly or device selection is wrong. | Re-program the button following the learning instructions. Ensure you have selected the correct device (A or B) before attempting to control it. |
| Jarak jauh goréng. | Low batteries or obstruction between remote and device. | Replace batteries. Ensure a clear line of sight between the remote and the device's IR receiver. |
7. Spésifikasi
| merek | Éléktronik Unggul |
| Ngaran modél | Saukur |
| Nomer modél | SUPTLB001 |
| Warna | Hideung |
| Téhnologi konektipitas | Infrared (IR) Learning Function |
| Alat nu cocog | Television, other IR-controlled devices |
| Maximum Devices Supported | 2 |
| Jumlah Kancing | 10 (Power, A, B, AV, V+, V-, P+, P-) |
| Jenis Batré | 2 x AAA (not rechargeable) |
| Rentang maksimum | 10 Méter (kira-kira 33 suku) |
| Ukuran (Kira-kira.) | 16.5 cm (Panjang) x 4.5 cm (Lebar) |
Gambar: Sisi view of the remote control with approximate dimensions.
8. Garansi jeung Rojongan
This Superior Electronics Simply SUPTLB001 remote control comes with a manufacturer's warranty of 2 taun ti tanggal beuli.
For warranty claims, technical assistance, or further support, please refer to the contact information provided with your purchase documentation or visit the official Superior Electronics websitus. Mangga simpen bukti pameseran anjeun kanggo validasi garansi.