Heller 250mm Extractor Bathroom/Laundry Exhaust Fan with LED Light User Manual

1. Bubuka

Hatur nuhun pikeun meuliasing the Heller 250mm Extractor Bathroom/Laundry Exhaust Fan with LED Light. This manual provides important information regarding the installation, operation, and maintenance of your new exhaust fan. Please read this manual thoroughly before installation and retain it for future reference.

2. Émbaran Kasalametan

Salawasna perhatikeun pancegahan kaamanan di handap ieu pikeun ngirangan résiko kahuruan, kejutan listrik, atanapi tatu.

• Pamasangan kedah dilakukeun ku tukang listrik anu mumpuni saluyu sareng sadaya kode listrik lokal sareng nasional.
• Pastikeun catu daya dipegatkeun samemeh instalasi, pangropéa, atawa beberesih.
• This appliance is suitable for ceiling installation only. Do not install on walls.
• Entong nganggo kipas ieu nganggo alat kontrol speed solid-state.
• Mastikeun grounding ditangtoskeun pikeun ngurangan résiko shock listrik.
• Jauhkeun objék asing tina bilah kipas salami operasi.
• The LED light is integrated and not user-replaceable.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Heller 250mm Extractor Bathroom/Laundry Exhaust Fan with LED Light unit
• Grille removable
• Citakan Motong
• Cord (integrated)
• Manual pangguna (dokumén ieu)

Figure 3.1: Heller 250mm Extractor Fan with LED Light. This image displays the fan's circular design, featuring a white outer casing and black internal blades, with the Heller brand name visible in the center.

4. Setup jeung Instalasi

This product is designed for DIY installation, but electrical connections should be made by a qualified professional.

4.1 Daptar pariksa Pra-Pamasangan

• Ensure the ceiling space has a minimum clearance of 100mm above the unit for proper ventilation.
• The fan requires a cut-out size of Ø290mm. Use the provided cut-out template.
• Pariksa yén catu dayana 220-240V.
• Confirm the installation location is suitable for a bathroom, ensuite, or laundry room.

4.2 Léngkah-léngkah Instalasi

1. Pegatkeun Daya: Pareuman daya dina pemutus sirkuit utama sateuacan ngamimitian padamelan listrik naon waé.
2. Nyiapkeun bubuka: Using the provided cut-out template, mark and cut a Ø290mm hole in the ceiling.
3. Posisi Kipas: Insert the fan unit into the prepared ceiling opening. Ensure it is securely seated. The maximum height of the unit is 154mm, with 128mm above the ceiling.
4. Sambungan listrik: Connect the fan's cord to the main power supply. This step kudu be performed by a qualified electrician. Ensure all connections are secure and properly insulated.
5. Unit Aman: Use appropriate fasteners (not supplied) to secure the fan housing to the ceiling joists or framing.
6. Pasang grille: Once the fan is securely installed and wired, attach the removable grille by aligning it with the fan housing and snapping it into place.
7. Mulangkeun Daya: Once installation is complete and all connections are checked, restore power at the main circuit breaker.

5. Parentah Operasi

The Heller exhaust fan is designed for simple operation.

• Hurungkeun/Pareuman: The fan and LED light are typically controlled by a standard wall switch connected during installation. Flip the switch to turn the unit on or off.
• Ventilasi: Allow the fan to operate for a sufficient period after showering or bathing to effectively remove moisture and odors from the room.
• Lampu LED: The integrated 8W LED light provides energy-efficient illumination (up to 6000K). It operates concurrently with the fan.

6. Pangropéa

Regular cleaning will ensure optimal performance and longevity of your exhaust fan.

6.1 Cleaning the Grille and Fan Blades

1. Pegatkeun Daya: Pareuman heula daya kipas dina pemutus sirkuit sateuacan diberesihan.
2. Leupaskeun grille: Gently pull down or unclip the removable grille from the fan housing.
3. Grille Bersih: Wash the grille with mild soap and water. Rinse thoroughly and allow it to dry completely before reattaching.
4. Bersihan bilah kipas: Carefully wipe the fan blades and interior housing with a damp lawon. Ulah nganggo pembersih atanapi pangleyur anu abrasif. Pastikeun teu aya cai anu asup kana wadah motor.
5. Pasang deui grille: Once clean and dry, reattach the grille to the fan housing.
6. Mulangkeun Daya: Balikkeun kakuatan dina circuit breaker.

Catetan: The motor is a ball bearing type and does not require lubrication. The LED light is not user-serviceable.

7. Cara ngungkulan

If you experience issues with your exhaust fan, refer to the table below for common problems and solutions.

If the problem persists after attempting these solutions, please contact Heller customer support.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information or technical support, please contact Heller customer service. Keep your proof of purchase for any warranty claims.

Inpormasi kontak: Please refer to the Heller official websitus atanapi dokuméntasi pameseran anjeun pikeun detil kontak anu paling anyar.