Fortin EVO-FORT3 Remote Start System User Manual

1. Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Fortin EVO-FORT3 Stand-Alone Add-On Remote Start Car Starter System. The EVO-FORT3 is designed to provide convenient remote starting capabilities for select Ford vehicles equipped with either a flip key or push-to-start ignition systems. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Gambar 1.1: Fortin EVO-FORT3 Remote Start System components. This image displays the EVO-ALL module, the THAR-FOR3 T-harness with various connectors, and the product packaging. The packaging highlights compatibility with Ford, Lincoln, and Mercury vehicles, and mentions "Faster Installations".

2. Émbaran Kasalametan

• Always disconnect the vehicle's negative battery terminal before beginning any electrical installation to prevent electrical shock or damage to the vehicle's electrical system.
• Ensure the vehicle is in Park (P) and the parking brake is engaged before attempting remote start.
• Do not install this system on vehicles with manual transmissions. This product is for automatic transmission vehicles only.
• Keep hands and clothing clear of moving engine parts when the engine is running.
• Ensure the installation area is well-ventilated.
• Upami anjeun henteu yakin ngeunaan léngkah-léngkah prosés pamasangan, konsultasi ka teknisi otomotif anu mumpuni.

3. Setup jeung Instalasi

The Fortin EVO-FORT3 system utilizes a plug-and-play T-harness for simplified installation. However, module programming is required using a separate FLASH-LINK tool.

3.1 Komponén diperlukeun

• Fortin EVO-ALL Module (included)
• THAR-FOR3 T-Harness (included)
• FLASH-LINK Programmer (sold separately, required for programming)
• Two (2) original vehicle keys (required for module programming)

3.2 Module Programming (FLASH-LINK Required)

The EVO-ALL module requires programming to your specific vehicle. This typically involves connecting the module to a computer via a FLASH-LINK programmer and using Fortin's software to flash the correct firmware and configure settings.

Klip 3.1: Idatalink BLADE Remote Start/Security Bypass Module Flashing. This video demonstrates the process of flashing and updating a Blade module and Compustar controller using a computer and USB adapter. It shows how to dock the module, connect to a PC, select vehicle information, and flash the firmware via the web interface. This process is similar to flashing the Fortin EVO-ALL module.

3.3 T-Harness Connection

The THAR-FOR3 T-harness simplifies the wiring process by connecting directly to existing vehicle connectors, minimizing the need for wire cutting.

1. Locate the vehicle's OBD-II diagnostic port, typically found under the dashboard on the driver's side.
2. Carefully disconnect the factory harness from the back of the OBD-II port.
3. Connect one end of the THAR-FOR3 T-harness to the factory OBD-II port.
4. Connect the other end of the THAR-FOR3 T-harness to the factory harness that was originally connected to the OBD-II port. Ensure all connections are secure and click into place.
5. Connect the EVO-ALL module to the designated connectors on the T-harness.
6. Secure the module and excess wiring using zip ties to prevent interference with vehicle pedals or moving parts.

Klip 3.2: Remote Start Installation for Ford Fusion. This video demonstrates a plug-and-play remote start installation for a Ford Fusion, showing the process of locating the OBD-II port, disconnecting the factory harness, and connecting the T-harness and module. This provides a visual guide for the general T-harness installation steps.

Klip 3.3: Start-X Select Ford Vehicles 2015-2023 Install. This video provides a general overview of installing a remote start system in select Ford vehicles, including steps for accessing the wiring behind the dashboard and connecting the T-harness. It illustrates the typical process for plug-and-play remote start systems.

4. Parentah Operasi

Once the Fortin EVO-FORT3 system is correctly installed and programmed, you can use your vehicle's factory remote to activate the remote start function.

4.1 Remote Start Activation

Pikeun ngamimitian kendaraan anjeun jarak jauh:

1. Ensure all vehicle doors, hood, and trunk/tailgate are fully closed.
2. Pencét éta Konci button on your factory remote three (3) times consecutively.
3. The vehicle's parking lights will flash, and the engine will start.

The engine will run for a preset duration (typically 15 minutes) or until it is shut down manually.

4.2 Remote Start Shutdown

To shut down the remote started engine:

• Pencét éta Konci button on your factory remote three (3) times consecutively.
• Alternatively, pressing the brake pedal inside the vehicle will also shut down the engine.

5. Pangropéa

The Fortin EVO-FORT3 system is designed for maintenance-free operation. Regular vehicle maintenance, including battery checks, will help ensure the continued reliable performance of the remote start system.

• Keep the module and wiring free from moisture and extreme temperatures.
• Nyingkahan tampering with the installed module or wiring.
• If any issues arise, refer to the troubleshooting section or contact support.

6. Cara ngungkulan

If your Fortin EVO-FORT3 remote start system is not functioning as expected, consider the following common issues and solutions:

• System does not activate:
  • Ensure all doors, hood, and trunk/tailgate are fully closed.
  • Check the vehicle's battery charge.
  • Verify that the factory remote is functioning correctly and has fresh batteries.
  • Confirm that the module was correctly programmed to your vehicle using the FLASH-LINK tool.
• Engine starts but immediately shuts down:
  • This may indicate an issue with the module's programming or a vehicle-specific security bypass. Re-verify programming steps.
  • Ensure the correct firmware for your specific vehicle model and year was installed.
• Remote start range is poor:
  • The remote start range is dependent on your factory remote's capabilities. Obstructions or interference can reduce range.
  • Consider an optional RF kit (sold separately) for extended range.

7. Spésifikasi

8. Garansi jeung Rojongan

For specific warranty information and technical support, please refer to the documentation included with your product or visit the official Fortin website. Ensure you have your product model number and purchase details available when contacting support.

Sumberdaya online sareng FAQ ogé tiasa sayogi dina produsén website to assist with common questions and troubleshooting.