ONKRON Full Motion TV Wall Mount M4-WHT User Manual

1. Bubuka

This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your ONKRON Full Motion TV Wall Mount, model M4-WHT. Please read all instructions carefully before installation to ensure proper setup and to prevent damage or injury.

2. Émbaran Kasalametan penting

• Kapasitas beurat: Ulah ngaleuwihan kapasitas beurat maksimum 77 lbs (35 kg). Ngaleuwihan wates ieu tiasa nyababkeun tatu parah atanapi karusakan harta benda.
• Ukuran layar: This mount is designed for TVs between 32 and 65 inches.
• Kasaluyuan VESA: Ensure your TV's VESA pattern (100x100mm to 400x400mm) is compatible with this mount.
• Jenis Témbok: This mount is suitable for installation on solid concrete walls, brick walls, and wood stud walls. Do not install on drywall alone.
• Pamasangan profésional: If you have any doubts about the installation process or the suitability of your wall, consult a qualified professional.
• Pakakas: Use appropriate tools and follow all safety precautions when drilling and tightening fasteners.
• Barudak: Jauhkeun barudak tina tempat pamasangan nalika dipasang.

3. Eusi Paket

Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact ONKRON customer support.

Figure 1: All necessary fasteners and a clear manual are included in the TV mounting kit.

• Wall Plate Assembly (pre-assembled)
• Panel VESA
• VESA Extenders (4 pieces)
• Plastic Covers for cable management
• Hardware Kit (various screws, washers, anchors, wrench)
• Citakan Pangeboran

4. Alat Diperlukeun (Teu Kaasup)

• Pensil
• Palu
• Phillips Kepala Obeng
• Bor Listrik
• Drill Bits (specific sizes depending on wall type)
• Tingkat
• Alat Panyungsi Paku (pikeun pamasangan paku kai)

5. Pitunjuk Instalasi

Watch the official ONKRON M4 Assembly and Configuration Instructions video for a visual guide:

5.1. Prepare the Mount

1. Use the provided wrench to unscrew the nuts and detach the VESA panel from the main mount assembly.
2. Carefully detach the plastic covers from the mount arms. These will be reattached later for cable management.

5.2. Mark Drill Holes on the Wall

Determine your desired TV height and position on the wall.

• Pikeun Tembok Stud Kayu:
  1. Use a stud finder to locate the center of a wood stud.
  2. Place the drilling template against the wall at the desired height, ensuring it is level.
  3. Mark the drill hole locations with a pencil.
  4. Drill pilot holes with a 5/32" (4mm) drill bit to a minimum depth of 3.1" (80mm). No dowels are needed for wood studs.
• Pikeun Témbok Beton/Bata:
  1. Place the drilling template against the wall at the desired height, ensuring it is level.
  2. Mark the drill hole locations with a pencil.
  3. Drill holes with a 3/8" (10mm) drill bit to a minimum depth of 3.1" (80mm).
  4. Insert the provided concrete anchors (dowels) into the drilled holes. Tap gently with a hammer until flush with the wall.

5.3. Install the Wall Plate

1. Align the main wall plate assembly with the drilled holes.
2. Secure the wall plate to the wall using the appropriate screws and washers from the hardware kit. Tighten firmly with the wrench.

5.4. Attach VESA Panel to TV

The ONKRON M4-WHT supports VESA patterns from 100x100mm to 400x400mm.

Figure 2: The VESA panel can be extended to fit larger VESA patterns.

1. Place your TV face down on a soft, clean surface to prevent scratches.
2. Identify your TV's VESA mounting holes.
3. If your TV's VESA pattern is 100x100, 100x200, or 200x200, you may not need the VESA extenders. Attach the VESA panel directly to the TV using the correct screws and plastic spacers (if needed to compensate for bolt length or curved screens).
4. If your TV's VESA pattern is larger (e.g., 200x300, 200x400, 300x200, 300x300, 300x400, 400x200, 400x300, 400x400), attach the VESA extenders to the VESA panel first, then secure the entire assembly to the TV using the appropriate screws and spacers.
5. Kencengkeun sadaya sekrup pageuh, tapi ulah kenceng teuing.

5.5. Hang Your TV onto the Mount

1. With assistance, carefully lift your TV and align the VESA panel (attached to the TV) with the mounting plate on the wall arm.
2. Hook the VESA panel onto the mount.
3. Secure the TV to the mount by tightening the safety screws located on the VESA panel.

5.6. Manajemén kabel

1. Route your TV cables through the designated channels on the mount arms.
2. Reattach the plastic covers to conceal the cables and provide a clean appearance.

6. Operating the TV Mount

The ONKRON M4-WHT offers versatile adjustments for optimal viewing.

Figure 3: Customize your viewing experience with tilt and extension.

• Penyesuaian Dengdekkeun: The mount allows for a tilt range of -5° to +8°. Loosen the tilt adjustment screws on the VESA panel, adjust the screen to your desired angle, and then re-tighten the screws to secure the position.
• Penyesuaian puteran: The articulating arm allows the TV to swivel up to 180° (depending on TV size and wall distance). Gently push or pull the TV to achieve the desired viewsudut ing.
• ekstensi: The mount can extend from a minimum distance of 2.1 inches (55mm) from the wall to a maximum of 19.7 inches (500mm).
• Ngaratakeun Layar: After installation, the screen can be aligned horizontally by slightly rotating the VESA panel before tightening the final screws.

Figure 4: Achieve a perfect view from anywhere with the 180-degree swivel.

7. Pangropéa

• beberesih: Ngabersihan gunung ku lawon lemes, garing. Hindarkeun pembersih abrasive atanapi pangleyur.
• Inspeksi périodik: Pariksa sadaya sekrup sareng sambungan sacara berkala pikeun mastikeun éta tetep pageuh sareng aman. Kencengkeun deui upami diperyogikeun.
• Bagian Pindah: The articulating arms are designed for smooth movement. No lubrication is typically required.

8. Cara ngungkulan

• TV Teu Tingkat: If the TV appears unlevel after installation, slightly loosen the screws connecting the VESA panel to the mount, adjust the TV to be level, and then re-tighten the screws.
• Gunung Karasa Leupas: Check all wall mounting screws and TV attachment screws. Ensure they are securely tightened. If the issue persists, re-evaluate your wall type and installation method.
• Difficulty Adjusting Tilt/Swivel: Ensure no cables are obstructing movement. For tilt, loosen the adjustment screws before attempting to change the angle, then re-tighten.

9. Spésifikasi

10. Garansi jeung Rojongan

ONKRON products undergo multi-stage quality control. For any questions, technical assistance, or warranty claims, please contact ONKRON customer support. Refer to your product packaging or the official ONKRON websitus pikeun inpo kontak panganyarna.

All necessary fasteners and a clear manual are included in the TV mounting kit. ONKRON full motion TV wall mounts undergo multi-stage quality control and feature sturdy packaging, with expert support ready to assist when needed.