1. Bubuka
This manual provides essential information for the installation, operation, and maintenance of your EVGA GeForce GTX 1070 Ti FTW2 GAMING graphics card. Please read these instructions carefully before proceeding with installation to ensure optimal performance and longevity of your product.
2. Naon dina Box
Pastikeun yén sadaya item di handap ieu kalebet dina pakét produk anjeun:
- EVGA GTX 1070 Ti GAMING FTW2 Graphics Card
- CD Supir
- Guide instalasi
- 6Pin(2) to 8 Pin Adapter
- EVGA Gaming Poster
- Powered by EVGA Case Badge
- EVGA Enthusiast Built Sticker

Image: Included accessories and documentation.

Image: Product packaging for the EVGA GeForce GTX 1070 Ti FTW2 GAMING graphics card.

Image: Two 6-pin to 8-pin power adapters, typically used to connect the graphics card to the power supply.
3. Produk Langkungview
The EVGA GeForce GTX 1070 Ti FTW2 GAMING graphics card is designed for high-performance computing and gaming. It features advanced cooling and monitoring capabilities.

Gambar: Hareupeun view tina kartu grafis, nunjukkeunasing the dual fan design and EVGA branding.

Gambar: Tukangeun view of the graphics card, showing the protective backplate.

Image: Close-up of the display output ports, featuring multiple DisplayPort, HDMI, and a DVI port.
4. Setup & Instalasi
Before installing your graphics card, ensure your system meets the minimum requirements, including a 500-watt power supply. The card connects via a PCI Express slot.
4.1. Sarat Sistim
- Minimum 500 Watt Power Supply
- PCI Express compatible motherboard with one available PCI Express x16 slot
- Compatible operating system (Windows 7/8/10 32/64bit)
4.2. Léngkah Instalasi
- Pareuman komputer sareng pegatkeun sadaya kabel.
- Buka wadah komputer anjeun.
- Pilari slot PCI Express x16 anu sayogi dina motherboard anjeun.
- Remove any expansion slot covers that may obstruct the graphics card.
- Carefully insert the graphics card into the PCI Express x16 slot until it is firmly seated.
- Ngamankeun kartu grafik kana hal kalawan screw a.
- Connect the necessary power cables from your power supply to the graphics card. Use the provided 6Pin(2) to 8 Pin Adapter if your power supply does not have native 8-pin PCIe connectors. The total power draw for this card is 235 watts.
- Tutup wadah komputer anjeun sareng sambungkeun deui sadaya kabel.
- Power on your computer and install the latest drivers from the EVGA website or the included driver CD.
5. Parentah Operasi
Once installed and drivers are updated, your EVGA GeForce GTX 1070 Ti FTW2 GAMING graphics card is ready for use. For advanced control and monitoring, utilize the EVGA Precision XOC software.
5.1. EVGA Precision XOC Software
EVGA Precision XOC allows you to:
- Monitor GPU, memory, and power temperatures.
- Saluyukeun laju kipas pikeun tingkat cooling sareng noise optimal.
- Apply optimal overclocks with a single click.
- Customize the RGB LED lighting on your card.
5.2. RGB LED Customization
The graphics card features an adjustable RGB LED. Use the EVGA Precision XOC software to personalize the lighting to match your system's aesthetic or to provide visual alerts for GPU, Power, and Memory thermal status.
6. iCX Technology Features
EVGA's iCX Technology provides advanced thermal monitoring and cooling control for enhanced performance and reliability.
6.1. 9 Thermal Sensors
Unlike traditional graphics cards that rely on a single GPU temperature sensor, iCX Technology incorporates 9 additional thermal sensors strategically placed across the PCB to monitor critical components such as Memory and VRM (Voltage Regulator Module). This provides a more comprehensive understanding of the card's thermal profile.
6.2. Asynchronous Fan Control
The dual fans operate independently, allowing for asynchronous control. This means each fan can adjust its speed based on the temperature of specific components (e.g., one fan cooling the GPU, the other cooling memory/VRM), leading to optimized cooling efficiency and reduced noise levels.
6.3. GPU/Memory/PWM Thermal Status Indicator LEDs
The card features RGB LED indicators that provide real-time visual feedback on the thermal status of the GPU, Memory, and Power (PWM) sections. These LEDs can be customized via software to display different colors based on temperature thresholds.