ACV 42SFO008+ML Steering Wheel Control Adapter Instruction Manual

1. Bubuka

The ACV 42SFO008+ML Steering Wheel Control Adapter allows you to retain the functionality of your vehicle's factory steering wheel audio controls when installing an aftermarket car stereo. This adapter is specifically designed for Ford C-Max models manufactured from December 2010 onwards and Ford Focus models manufactured from 2011 onwards. This manual provides essential information for the correct installation and operation of your adapter.

2. Émbaran Kasalametan

• Salawasna pegatkeun sambungan batré kandaraan sateuacan ngamimitian pamasangan listrik pikeun nyegah korsleting sareng karusakan.
• If you are unsure about any step of the installation process, consult a qualified professional installer.
• Ensure all electrical connections are secure and properly insulated to prevent hazards.
• Do not attempt to modify or disassemble the adapter module.

3. Eusi Paket

Punten parios yén sadaya barang anu didaptarkeun di handap aya dina pakét anjeun:

• ACV 42SFO008+ML Main Interface Module
• Kabel Harness Khusus Kendaraan
• Infrared Emitter/Receiver Module (small black box)
• Universal Head Unit Connection Cable (with KEY1, KEY2, GND, and 3.5mm jack)

Gambar 1: ACV 42SFO008+ML Main Interface Module with vehicle-specific wiring harness, including various connectors and the infrared emitter module.

Gambar 2: Universal Head Unit Connection Cable, featuring labeled wires for KEY1, KEY2, GND, and a 3.5mm jack for connecting to an aftermarket stereo's steering wheel control input.

4. Setup jeung Instalasi

Follow these steps for proper installation. It is recommended to consult your vehicle's service manual and your aftermarket head unit's instruction manual for specific wiring diagrams.

1. Persiapan: Disconnect the negative terminal of your vehicle's battery. Carefully remove the factory car stereo from the dashboard.
2. Connect Vehicle Harness: Connect the vehicle-specific wiring harness from the ACV adapter to the corresponding connectors in your vehicle's dashboard. These typically connect to the factory radio harness.
3. Connect Head Unit Harness: Connect the ACV adapter's main harness to your aftermarket car stereo's ISO connectors. Ensure all power, ground, and speaker wires are correctly matched.
4. Connect Steering Wheel Control Wires: Identify the steering wheel control input wires on your aftermarket head unit. These are often labeled as SWC, KEY1, KEY2, or Remote Input. Connect the

   Dokumén Patali - 42SFO008+ML

   	ACV 42xfo004-0 Steering Wheel Control Interface for Ford Vehicles Installation Guide Installation guide for the ACV 42xfo004-0 steering wheel control interface, designed for Ford Fiesta (JA8) 2008-2010 vehicles. This interface retains factory steering wheel controls and provides outputs for aftermarket head units.
   	ACV 42a-1130-002-0 Steering Wheel Control Interface Installation Guide for Honda Vehicles Installation guide for the ACV 42a-1130-002-0 steering wheel control interface, designed for Honda vehicles. Provides wiring keys, dipswitch configurations, and step-by-step installation instructions for retaining steering wheel controls and other vital features.
   	ACV 42XMZ012-0 Steering Wheel Control Interface Installation Guide for Mazda MX-5 Comprehensive installation guide for the ACV 42XMZ012-0 steering wheel control interface, enabling retention of factory steering wheel controls in Mazda MX-5 (NB/NC) vehicles when installing an aftermarket stereo. Features include retaining OEM AUX input, outputs for speed pulse, reverse, and park brake, and remappable buttons.
   	Antarmuka Kontrol Setir pikeun Kendaraan Ford 42XF0002-0 Pituduh Pamasangan Pituduh pamasangan pikeun antarmuka kontrol setir ACV 42XF0002-0 pikeun kandaraan Ford. Antarmuka ieu ngamungkinkeun pikeun nyimpen kontrol setir pabrik nalika masang stereo aftermarket, nawiskeun fitur sapertos pembaruan parangkat lunak sareng pemetaan ulang tombol pikeun integrasi kandaraan anu mulus.
   	Pituduh Pamasangan Antarmuka Kontrol Setir ACV 42xfa004-0 pikeun Citroen, Fiat, Opel, Peugeot This document provides the installation guide for the ACV 42xfa004-0 steering wheel control interface. It enables the retention of factory steering wheel controls and other vital features when installing an aftermarket stereo in compatible Citroen, Fiat, Opel, and Peugeot vehicles. Includes wiring keys, dipswitch configurations, and step-by-step installation instructions.
   	ACV 42XTY006-0 Steering Wheel Control Interface Installation Guide for Citroen, Peugeot, Toyota Comprehensive installation guide for the ACV 42XTY006-0 steering wheel control interface, enabling retention of factory steering wheel controls in Citroen, Peugeot, and Toyota vehicles. Features dipswitch configuration, wiring details, and button remapping.