EVGA GeForce GTX 1080 Ti FTW3 DT Gaming Graphics Card Instruction Manual

1. Bubuka jeung Leuwihview

This manual provides essential information for the installation, operation, and maintenance of your EVGA GeForce GTX 1080 Ti FTW3 DT Gaming graphics card. This high-performance graphics card features EVGA iCX Technology, incorporating 9 additional thermal sensors for precise monitoring of memory and VRM components, alongside RGB LED indicators for GPU, Memory, and PWM thermal status. Its design includes a newly engineered die-cast baseplate, backplate, and optimized airflow chambers for superior cooling efficiency. Full control and customization are available through EVGA Precision XOC software.

2. Eusi Paket

Pastikeun yén sadaya item anu didaptarkeun di handap aya dina pakét produk anjeun:

• EVGA GeForce GTX 1080 Ti FTW3 DT Gaming Graphics Card
• Instruksi Manual
• Kabel Diperlukeun

Figure 1: The retail packaging for the EVGA GeForce GTX 1080 Ti FTW3 DT Gaming graphics card.

3. Fitur Produk

• Real Base Clock: 1480 MHz
• Real Boost Clock: 1582 MHz
• Memory Detail: 11264MB GDDR5X
• EVGA iCX Technology: Features 9 additional temperature sensors to monitor Memory and VRM.
• GPU/Memory/PWM Thermal Status Indicator: RGB LEDs provide visual feedback on thermal conditions.
• Desain cooling: New vented heatsink fin design and pin fins for optimized airflow.
• Sekering Kaamanan: Integrated safety fuse protects components from damage due to improper installation or other component failures.

Gambar 2: Garis hareup langsung view tina kartu grafis, nunjukkeunasing its triple-fan cooling system and the EVGA branding.

4. Spésifikasi

5. Pitunjuk Instalasi

5.1. Persiapan

• Ensure your computer is powered off and disconnected from the main power source.
• Discharge any static electricity from your body by touching a grounded metal object.
• Verify your power supply unit (PSU) meets the recommended wattage (e.g., 850W for some high-end GPUs) and has the necessary 6+2 pin or 16-pin (12VHPWR) PCIe power connectors.
• Consult your motherboard manual to identify the primary PCIe x16 slot, typically the top-most long slot, for optimal performance.
• Remove the necessary expansion slot covers from your PC case to accommodate the graphics card's display outputs.

5.2. Instalasi fisik

1. Carefully align the graphics card's PCIe connector with the primary PCIe x16 slot on your motherboard.
2. Gently but firmly press the card into the slot until it is fully seated. You should hear a click as the locking mechanism on the motherboard engages.
3. Secure the graphics card to the PC case using the screws from the removed expansion slot covers.

Figure 3: An angled perspective of the graphics card, showing the PCIe connector and overall design.

Gambar 4: Bagian tukang view of the graphics card, showing the protective backplate and the area where it secures to the PC case.

5.3. Sambungan Daya

1. Locate the appropriate PCIe power cables from your power supply. The EVGA GeForce GTX 1080 Ti FTW3 DT Gaming typically requires multiple 6+2 pin connectors.
2. Connect these cables firmly into the corresponding power sockets on the graphics card. Ensure each connector is fully seated and the clips engage.

5.4. Pamasangan supir

1. After physical installation, connect your monitor to one of the graphics card's display outputs (DisplayPort or HDMI).
2. Daya dina komputer Anjeun.
3. Sakali sistem operasi anjeun dimuat, buka NVIDIA resmi website (nvidia.com/drivers) or EVGA's support page (evga.com/support/download) to download the latest drivers for your GeForce GTX 1080 Ti.
4. Turutan pitunjuk dina layar pikeun ngalengkepan pamasangan supir. Sistem tiasa waé kedah dibalikan deui.

Figure 5: A close-up of the graphics card's display output panel, featuring multiple DisplayPort and HDMI connections.

6. Parentah Operasi

Once drivers are installed, your EVGA GeForce GTX 1080 Ti FTW3 DT Gaming graphics card is ready for use. For optimal performance and customization, install EVGA Precision XOC software. This utility allows for fine-tuning of clock speeds, fan curves, and monitoring of the iCX thermal sensors. Ensure your operating system and games are updated to leverage the full capabilities of the graphics card.

7. Pangropéa

• beberesih: Periodically clean the fans and heatsink fins to prevent dust buildup, which can impede airflow and cooling performance. Use compressed air to gently remove dust. Ensure the system is powered off and unplugged before cleaning.
• Tiupan hawa: Maintain good airflow within your PC case by ensuring case fans are properly configured and not obstructed.
• Pembaruan supir: Regularly check for and install the latest graphics drivers from NVIDIA or EVGA to ensure optimal performance, stability, and access to new features.

8. Cara ngungkulan

• Henteu aya kaluaran tampilan:
  • Pastikeun kabel monitor disambungkeun sacara aman ka kartu grafik sareng monitor.
  • Pariksa yén kartu grafis dipasang sapinuhna dina slot PCIe.
  • Pariksa yén sadaya kabel daya PCIe anu diperyogikeun parantos nyambung kana kartu grafis.
  • Pastikeun monitor anjeun disetel ka sumber input anu bener.
• Instabilitas Sistem / Kacilakaan:
  • Mastikeun supir grafik up to date.
  • Monitor GPU temperatures using software like EVGA Precision XOC to check for overheating.
  • Verify your power supply unit meets the recommended wattage for your system.
• Kinerja goréng:
  • Mastikeun supir grafik up to date.
  • Check in-game settings to ensure they are appropriate for your system configuration.
  • Tutup aplikasi latar tukang anu teu perlu.

9. Garansi jeung Rojongan

For detailed warranty information, technical support, and additional resources, please visit the official EVGA websitus di evga.com/support/. You may also register your product on the EVGA website to access full warranty benefits and support services.