SmallRig 2059 Mini Ball Head Mount Instruction Manual

1. Bubuka

The SmallRig 2059 Mini Ball Head Mount is a compact and durable accessory designed to provide flexible mounting solutions for various camera equipment. It features a swiveling ball-head, a cold shoe adapter, and a 1/4" screw, allowing for adjustable directions and wide compatibility with cameras and accessories.

2. Eusi Paket

The SmallRig 2059 package includes the following items:

• 2 x Mini Ball Head Mounts
• 2 x Allen Wrenches
• 2 x 1/4" Screws

Image: Contents of the SmallRig 2059 package, showing two mini ball head mounts, two Allen wrenches, and two 1/4" screws.

3. Fitur konci

• Mini Ball Head: Designed to attach cameras or accessories securely.
• Adaptor Sepatu Tiis: Allows attachment to camera cold shoe mounts.
• Sekrup 1/4": For mounting monitors or other accessories in adjustable directions.
• Wingnut Locking Mechanism: Ensures secure positioning of the ball head.
• Konstruksi awét: Made from aluminum alloy for small size, lightweight, and durability.
• Adjustable Direction: The ball head can be adjusted to almost any position for optimal viewdina sudut.

Image: Close-up of the SmallRig 2059 showing the 360-degree adjustable ball head and wingnut locking mechanism.

4. Kasaluyuan

The cold shoe adapter is compatible with most cameras, including but not limited to:

• Canon
• Nikon
• Olympus
• Pentaks
• Panasonic
• Fujifilm
• Kodak

The 1/4" screw is compatible with a wide range of accessories that feature a 1/4" threaded hole, such as monitors, LED lights, microphones, and camera cages.

Image: Diagram illustrating the compatibility of the SmallRig 2059 with monitors, GoPros, flashes, camera cages, top handles, and top plates.

5. Parentah Setup

5.1 Attaching to a Camera Hot Shoe

1. Ensure the cold shoe adapter is securely attached to the base of the mini ball head.
2. Slide the cold shoe adapter into your camera's hot shoe mount.
3. Ketang knurled wheel on the cold shoe adapter to secure the mount to the camera.

5.2 Attaching to a 1/4" Threaded Mount (e.g., Tripod)

1. If the cold shoe adapter is attached, unscrew it from the base of the mini ball head.
2. Screw the 1/4" threaded base of the mini ball head onto your tripod or other accessory with a 1/4" screw.
3. Tighten the base securely.

5.3 Mounting an Accessory to the Ball Head

1. Attach your accessory (e.g., monitor, light) to the 1/4" screw on top of the ball head.
2. Tighten the accessory securely onto the 1/4" screw.

Image: A SmallRig 2059 Mini Ball Head Mount attached to a camera's hot shoe, supporting an external monitor.

6. Operasi Kepala Bola

1. To adjust the angle of your mounted accessory, loosen the large wingnut on the side of the ball head.
2. Carefully position your accessory to the desired angle. The ball head allows for 360-degree rotation and tilt.
3. Once the desired position is achieved, tighten the wingnut firmly to lock the ball head in place.

7. Pangropéa sarta perawatan

• Keep the ball head clean from dust and debris. Use a soft, dry cloth for cleaning.
• Avoid over-tightening screws and nuts, as this can cause damage to the threads or components.
• Store the ball head in a dry environment to prevent corrosion.
• Pariksa sadaya sekrup sareng sambungan sacara rutin pikeun mastikeun éta aman.

8. Cara ngungkulan

8.1 Ball Head Not Holding Position

If the ball head is not holding its position, ensure the wingnut is fully tightened. The maximum load capacity for the ball head is 3 kg (6.6 lbs). Exceeding this weight may prevent it from holding position securely.

8.2 Difficulty Attaching/Detaching

Ensure all threads are clean and free from obstruction. Do not force components. If a component is stuck, gently try to loosen it or consult customer support.

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information or technical support, please refer to the official SmallRig websitus atanapi ngahubungan layanan palanggan maranéhanana langsung. Simpen resi pameseran anjeun pikeun klaim garansi.

SmallRig Resmi Websitus: Toko SmallRig