Manual Instruksi Bohlam Philips LED GU10 4.5W (Sarua jeung 50W) Bodas Lemes WarmGlow

1. Produk Langkungview

The Philips LED GU10 bulb is an energy-efficient replacement for traditional 50W halogen GU10 bulbs. Featuring a classic glass design, this bulb is engineered to replicate the familiar lighting experience of halogen bulbs while offering significant energy savings and an extended lifespan. It provides a Soft White WarmGlow, transitioning from 2700K to 2200K when dimmed, and is fully dimmable. With instant-on light and a standard GU10 base, it is ideal for recessed and track lighting applications.

Fitur konci:

• Énergi Éfisién: 4.5W LED replaces 50W halogen, saving up to 80% in energy costs.
• WarmGlow Feature: Dims from 2700K (Soft White) to 2200K for a cozy ambiance.
• Dimmable: Cocog sareng kalolobaan dimmer pikeun tingkat cahaya anu tiasa diatur.
• Umur panjang: Lasts up to 25,000 hours or over 22 years (based on 3 hours/day usage).
• Instan-Asupkeun: Provides full brightness immediately with no warm-up time.
• Sudut Beam: 35-Degree beam for focused illumination.
• Tipe Dasar: Standard GU10 base for easy installation.

2. Émbaran Kasalametan

Mangga baca sareng pahami sadaya pitunjuk sateuacan masang atanapi nganggo produk ieu. Upami henteu nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, atanapi bahaya sanésna.

• Résiko Setrum Listrik: Always turn off power to the fixture at the circuit breaker before installation, removal, or inspection.
• Résiko seuneu: Ulah ngaleuwihan wat maksimumtage rating of the fixture. Ensure the bulb is suitable for the intended application.
• Kasaluyuan: Use only with GU10 compatible fixtures. This bulb is designed for 120V AC power sources.
• Suhu operasi: Do not use in totally enclosed luminaires unless the bulb is specifically rated for such use, as this may shorten bulb life.
• pembuangan: Buang bohlam anu dipaké nurutkeun peraturan lokal.

3. Pamasangan

This Philips LED GU10 bulb is designed for easy replacement of existing GU10 halogen bulbs.

1. Pareuman Daya: Ensure the power supply to the light fixture is completely turned off at the circuit breaker or fuse box.
2. Leupaskeun bohlam heubeul: Allow the old bulb to cool completely before touching. Gently push the old GU10 bulb into the fixture and twist counter-clockwise to unlock and remove it.
3. Selapkeun Bohlam Anyar: Align the two pins of the new Philips LED GU10 bulb with the holes in the fixture socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not force the bulb.
4. Mulangkeun Daya: Hurungkeun catu daya deui dina pemutus sirkuit.
5. Tes: Hurungkeun saklar lampu pikeun mastikeun operasi anu leres.

Figure 1: Close-up of the Philips LED GU10 bulb, highlighting its two-pin base for easy installation.

4. Parentah Operasi

This Philips LED GU10 bulb is designed for simple operation and enhanced comfort.

• Operasi standar: Simply turn on the light switch for instant, full brightness (2700K Soft White).
• Fungsi Dimmable: When connected to a compatible dimmer switch, you can adjust the light output. As the bulb is dimmed, its color temperature will gradually shift from 2700K (Soft White) to a warmer 2200K, creating a cozy and inviting atmosphere.

Figure 2: Color Temperature Chart illustrating the range of light colors from warm amber to cool daylight. This Philips bulb features WarmGlow technology, shifting from 2700K to 2200K when dimmed.

5. Pangropéa

Philips LED bulbs require minimal maintenance due to their long lifespan.

• beberesih: Pastikeun kakuatan pareum sareng bohlamna tiis sateuacan beberesih. Ngusap bohlam ku lawon lemes, garing. Ulah make cleaners cair atawa abrasive.
• ngagantian: When the bulb reaches the end of its life, replace it following the installation steps outlined in Section 3.

6. Cara ngungkulan

If you experience issues with your Philips LED GU10 bulb, refer to the following common troubleshooting steps:

• Bohlam Teu Nyaangan:
  • Pariksa lamun catu daya ka fixture dihurungkeun.
  • Ensure the bulb is correctly seated and locked into the GU10 socket.
  • Test the bulb in another working fixture to rule out a faulty bulb.
• Lampu kedip-kedip:
  • Ensure your dimmer switch is compatible with LED bulbs. Older dimmers designed for incandescent bulbs may cause flickering.
  • Verify the bulb is securely installed.
  • Flickering can also be caused by rapid responses to driver current, which Philips LED lighting minimizes.
• Light Too Dim or Too Bright:
  • If using a dimmer, adjust the dimmer switch to your desired brightness level.
  • Confirm the bulb's wattage equivalent (50W) and lumen output (380 lumens) are appropriate for your needs.

7. Spésifikasi

8. Garansi jeung Rojongan

Philips products are manufactured to the highest standards. For specific warranty information and customer support, please refer to the packaging or visit the official Philips websitus.

Dukungan Online: www.philips.com

9. Inpormasi Produk Tambahan

Figure 3: Philips LED GU10 bulb in its packaging, emphasizing its WarmGlow and dimmable capabilities.

Figure 4: Philips EyeComfort logo, indicating the bulb is designed to be gentle on the eyes.

Figure 5: Infographic detailing the various benefits of Philips LED technology, including long lifetime, energy efficiency, and dimmability.

Figure 6: Philips' commitment to EyeComfort lighting, promoting light that is easy on the eyes for various activities.

Figure 7: A statement emphasizing the benefits of Philips EyeComfort lighting for eye health.

Figure 8: Philips LEDs provide comfortable, high-quality light, offering over 80% energy savings compared to traditional incandescent lamps.

Figure 9: Key benefits of Philips gentle light: instant on, high quality, and energy saving.

Figure 10: A visual representation of multiple Philips GU10 bulbs.