VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount

1. Bubuka

This manual provides detailed instructions for the assembly, operation, and maintenance of your VIVO STAND-V102F Dual Monitor Free-Standing Desk Mount. This mount is designed to hold two flat or curved display screens ranging from 13 to 30 inches, with a maximum weight capacity of 17.6 lbs per screen. It supports VESA mounting patterns of 75x75mm or 100x100mm.

Perhatosan Kasalametan:

• Pastikeun yén sadaya komponén dipasang sacara aman sateuacan dianggo.
• Do not exceed the maximum weight capacity of 17.6 lbs per screen.
• Avoid pulling monitors too far forward or backward unless the stand is bolted down, as this may compromise stability.
• Always check that the base size fits your available desk space to prevent tipping.

2. Eusi Paket

Please verify that all components listed below are present in your package. If any parts are missing or damaged, contact VIVO customer support.

• Heavy-Duty Base (11" x 15.4")
• Center Pole (16.4" height)
• Dual Monitor Arms with VESA Plates
• Klip Manajemén Kabel
• All necessary hardware (screws, washers, Allen keys)

3. Parentah Majelis

Follow these steps to assemble your VIVO Dual Monitor Free-Standing Desk Mount.

1. Attach the Center Pole to the Base: Securely fasten the center pole to the heavy-duty base using the provided screws and Allen key. Ensure it is stable.
2. Install Monitor Arms: Slide the dual monitor arms onto the center pole. Adjust their height to your preference and tighten the locking mechanism.
3. Pasangkeun Pelat VESA kana Monitor: Remove the VESA plates from the monitor arms. Attach these plates to the back of your monitors using the appropriate screws for your monitor's VESA pattern (75x75mm or 100x100mm).
4. Mount Monitors: Carefully slide the monitors (with attached VESA plates) onto the monitor arms. Ensure they click securely into place.
5. Manajemén Kabel: Utilize the included cable management clips to route and organize your monitor cables along the arms and down the center pole for a tidy setup.

Figure 1: Assembled VIVO Dual Monitor Free-Standing Desk Mount with monitors.

Figure 2: Detail of VESA plate for monitor attachment.

4. Parentah Operasi

The VIVO STAND-V102F offers full articulation for optimal viewdina sudut.

• Penyesuaian Jangkungna: Leupaskeun clamp on the center pole to slide the monitor arms up or down. Re-tighten the clamp firmly once the desired height is achieved.
• Penyesuaian Dengdekkeun: Monitors can be tilted +45° to -45°. Adjust the tilt knob on the VESA plate to achieve your preferred vertical viewsudut ing.
• Penyesuaian puteran: The monitor arms allow for 180° swivel, enabling you to adjust the horizontal angle of each monitor independently.
• Rotasi: Monitors can be rotated 360° for portrait or landscape orientation. Simply turn the monitor to the desired orientation.
• Arm Articulation: The double center arm joints provide additional articulation, allowing for flexible monitor placement and positioning.

Figure 3: Full articulation features including tilt, swivel, and rotation.

Gambar 4: Kelample of monitors in both portrait and landscape orientations.

5. Fitur

• Kasaluyuan Universal: Fits two screens from 13" to 30" and up to 17.6 lbs each. Supports VESA 75x75mm or 100x100mm mounting patterns.
• Full Articulation: Offers +45° to -45° tilt, 180° swivel, and 360° rotation for flexible viewing.
• Penyesuaian Jangkungna: Monitors can be adjusted along the 16.4" center pole.
• Heavy-Duty Base: A solid steel 11" x 15.4" base ensures stability for your monitor setup.
• Manajemén Kabel Terpadu: Clips are included to keep cables organized and out of sight.

Figure 5: Key dimensions and compatibility information.

Figure 6: The heavy-duty base providing stability.

Gambar 7: Sistem manajemen kabel anu terintegrasi.

6. Spésifikasi

7. Pangropéa

To ensure the longevity and optimal performance of your VIVO monitor mount, follow these maintenance guidelines:

• Ngabersihan rutin: Usapkeun dudukan ku kaén nu lemes,amp lawon pikeun miceun lebu sareng kokotor. Hindarkeun pembersih atanapi pangleyur anu abrasif.
• Pariksa Fasteners: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability.
• Lubrication: If any joints become stiff, a small amount of silicone-based lubricant can be applied to the moving parts.

8. Cara ngungkulan

Upami anjeun ngalaman masalah sareng dudukan monitor anjeun, tingali masalah sareng solusi umum ieu:

• Mount is Unstable/Tipping:
  • Ensure the heavy-duty base is fully on a flat, stable surface.
  • Verify that the combined weight of your monitors does not exceed the maximum capacity.
  • Avoid extending monitors too far forward or backward from the center pole without securing the base to the desk (if applicable).
• Monitors Sagging/Not Holding Position:
  • Tighten the tilt adjustment knob on the VESA plate.
  • Ensure all arm joints are securely tightened with the provided Allen key.
• Difficulty Adjusting Tilt:
  • Some tilt bolts may require a specific Allen key or tool for proper tightening/loosening. Refer to the assembly diagram for exact locations.
  • Ensure the monitor is not exceeding the weight limit, which can make adjustments difficult.

9. Video Produk Resmi

10. Garansi jeung Rojongan

VIVO products are backed by a manufacturer's warranty. For specific warranty details, product registration, or technical support, please visit the official VIVO websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun pikeun klaim jaminan.

VIVO is a US-based company committed to providing quality ergonomic solutions. Their sales and technical support teams are available to assist with any product-related inquiries.

Figure 8: VIVO's commitment to customer support.