BougeRV Solar Panel Cable Connectors with Spanners

1. Produk Langkungview

The BougeRV Solar Panel Cable Connectors with Spanners (Model IRV014) provide a reliable and durable solution for connecting solar panels. This kit includes male and female connectors, pins, and spanners, designed for easy and secure installation in various solar power systems.

Figure 1: BougeRV Solar Connectors Kit

Fitur konci:

• Kit lengkep: Includes 6 pairs of male and female solar panel connectors, 6 pairs of male and female solar connector pins, and 1 pair of spanners for comprehensive assembly.
• Desain tahan cuaca: Features a waterproof ring on each connection to effectively seal out water and dust, preventing corrosion and ensuring long-term performance.
• Bahan awét: Constructed with PPO insulation material, offering excellent aging resistance and UV endurance, capable of withstanding harsh outdoor conditions for over 20 years.
• Kasaluyuan lega: Compatible with PV cables ranging from 13-10AWG (2.5mm²-6mm²).
• Majelis Gampang: Designed for quick and simple assembly and disassembly without requiring specialized tools beyond the included spanners.

2. Eusi Paket

Pastikeun yén sadaya item aya dina pakét anjeun:

• 6 x Male Solar Panel Connectors
• 6 x Female Solar Panel Connectors
• 6 x Male Solar Connector Pins
• 6 x Female Solar Connector Pins
• 1 x Pair of Spanners

3. Setup jeung Instalasi

Follow these steps to properly install the BougeRV Solar Panel Cable Connectors:

1. Nyiapkeun kabel: Strip approximately 1/4 inch (6mm) of insulation from the end of your PV cable (10-13AWG). Ensure no copper strands are broken during stripping.
2. Crimp the Pin: Insert the stripped wire into the appropriate male or female metal pin. Use a crimping tool to securely crimp the pin onto the wire. The bare copper wire should just barely protrude from the crimp clamps.
3. Insert Pin into Connector: Slide the crimped pin into the corresponding male or female connector housing until it clicks into place. Ensure the waterproof rubber seal is correctly positioned around the wire.
4. Tighten the Connector: Screw the back nut of the connector onto the housing. Use the provided spanners to tighten the nut firmly, ensuring a weather-tight seal.
5. Connect Male and Female: Align the male and female connectors and push them together until they click, forming a secure and waterproof connection.

Figure 2: Installation Steps for Solar Connectors

Figure 3: Using the Spanner Tool for Tightening

Pidéo Pamasangan:

4. Parentah Operasi

Connecting and disconnecting the BougeRV solar connectors is designed to be straightforward:

• Sambungan: Align the male and female connectors, ensuring the internal pins are correctly oriented. Push them firmly together until you hear or feel a click, indicating a secure lock.
• Pegatkeun sambungan: To disconnect, use the spanner tool or press the built-in lock tabs on the side of the connector. While pressing the tabs, pull the male and female connectors away from each other. Do not attempt to disconnect under load.

Figure 4: Plug and Play Connection and Disconnection

5. Pangropéa

To ensure the longevity and optimal performance of your BougeRV solar connectors, consider the following maintenance tips:

• Inspeksi rutin: Periodically check all connections for any signs of wear, damage, or corrosion. Ensure the nuts are tight and the waterproof seals are intact.
• beberesih: If connectors become dirty, gently clean them with a soft, dry cloth. Avoid using harsh chemicals or abrasive materials that could damage the PPO insulation.
• Perlindungan Lingkungan: The connectors are designed for outdoor use with IP67 waterproof and dustproof ratings. However, extreme conditions may still warrant additional protective measures if possible.

Figure 5: Waterproof Ring for Enhanced Protection

Figure 6: PPO Material for Durability

6. Cara ngungkulan

If you encounter issues with your solar connectors, consider the following:

• Sambungan leupas: Ensure all connector nuts are fully tightened with the spanners. A loose connection can lead to resistance and heat buildup.
• Taya Kaluaran Daya: Check if the male and female connectors are fully engaged and clicked into place. Verify that the internal pins are correctly crimped and inserted.
• asupan cai: If water is found inside the connector, check the integrity of the waterproof ring and ensure the cable diameter is appropriate for the connector's seal. Re-assemble carefully.
• Difficulty Disconnecting: Use the spanner tool to press the locking tabs firmly while pulling the connectors apart. Do not force them.

7. Spésifikasi

Gambar 7: Spesifikasi Téknis Langkungview

Gambar 8: Dimensi Produk

Angka 9: Ngabeledug View of Connector Components

8. Garansi jeung Rojongan

BougeRV products are manufactured to high-quality standards. For warranty information, technical support, or customer service inquiries, please refer to the official BougeRV websitus atanapi ngahubungi dukungan palangganna sacara langsung. Simpen resi pameseran anjeun kanggo klaim garansi.