Bubuka
This manual provides instructions for the assembly, operation, and maintenance of your Orion SpaceProbe II 76mm Altazimuth Reflector Telescope. This telescope is designed for observing celestial objects such as the Moon, planets, and brighter deep-sky objects. It features a 76mm (3-inch) glass primary mirror for light collection and comes with two 1.25-inch Kellner eyepieces (25mm and 10mm) for varying magnifications. A red-dot reflex sight assists in locating objects. The altazimuth mount allows for easy movement in horizontal and vertical directions.

Figure 1: Orion SpaceProbe II 76mm Altazimuth Reflector Telescope.
Eusi pakét
Before beginning assembly, ensure all components are present. Refer to the image below for a visual guide to the included parts.
- Rakitan Tabung Optik Teleskop (OTA)
- Gunung Altazimuth
- Adjustable Aluminium Tripod
- Dulang aksésori
- Lensa Mata Kellner 25mm (1.25")
- Lensa Mata Kellner 10mm (1.25")
- Red-Dot Reflex Sight
- MoonMap 260
- Instruksi Manual

Figure 2: Unpacked components of the Orion SpaceProbe II 76mm Telescope.
Setup sareng Majelis
- Pasang Tripod: Extend the tripod legs to a suitable height and secure them. Attach the accessory tray to the center brace of the tripod.
- Pasang Gunung: Secure the altazimuth mount head to the top of the tripod. Ensure it is firmly tightened.
- Pasang tabung optik: Place the telescope optical tube onto the altazimuth mount. The tube typically attaches with a dovetail bar or mounting rings. Secure the tube firmly to prevent accidental dislodgement.
- Install the Red-Dot Reflex Sight: Slide the red-dot reflex sight into its mounting bracket on the optical tube. Tighten the retaining screw.
- Selapkeun Eyepiece: Loosen the thumbscrews on the focuser. Insert the 25mm Kellner eyepiece into the focuser barrel. Tighten the thumbscrews to hold the eyepiece in place.

Figure 3: Fully assembled Orion SpaceProbe II 76mm Telescope.
Ngoperasikeun Teleskop
1. Aligning the Red-Dot Reflex Sight
The red-dot reflex sight helps you point the telescope accurately.
- During daylight, point the main telescope at a distant, easily identifiable object (e.g., a telephone pole or building top).
- Look through the 25mm eyepiece and center the object in the field of view.
- Turn on the red-dot sight. Look through the sight and use its adjustment knobs to move the red dot until it is centered on the same object that is centered in the telescope's eyepiece.
- Once aligned, the red-dot sight will indicate where the telescope is pointing.
2. Fokus
To achieve a clear image, rotate the focuser knobs slowly until the object appears sharp. Fine adjustments may be needed as objects move or as atmospheric conditions change.
3. Changing Eyepieces
To change magnification, loosen the thumbscrews on the focuser, carefully remove the current eyepiece, and insert another. The 25mm eyepiece provides lower magnification and a wider field of view, ideal for locating objects. The 10mm eyepiece offers higher magnification for detailed views.

Figure 4: Focuser and red-dot sight detail.
4. Using the MoonMap 260
The included MoonMap 260 helps identify lunar features. Use it to locate craters, maria, and other interesting points on the Moon's surface as you observe through your telescope.

Figure 5: Orion MoonMap 260 for lunar observation.
Pangropéa
- Optik beberesih: Dust on the primary mirror or eyepieces should be removed with a soft brush or compressed air. For stubborn smudges, use a specialized optical cleaning solution and a microfiber cloth, applying minimal pressure. Avoid touching optical surfaces directly.
- Panyimpenan: Simpen teleskop dina lingkungan anu garing sareng henteu lebu. Simpen tutup lebu dina tabung optik sareng eyepieces nalika henteu dianggo.
- Tripod and Mount: Periodically check all screws and bolts on the tripod and mount for tightness. Do not overtighten.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Gambar buram atawa teu fokus. | Pokus teu disaluyukeun leres. | Rotate the focuser knobs slowly until the image is sharp. |
| Teu bisa manggihan objék. | Red-dot sight is not aligned with the main telescope. | Align the red-dot sight as described in the "Operating the Telescope" section. |
| Gambar nembongan taram atawa samar. | Observing faint objects from a light-polluted area; high magnification on a faint object. | Move to a darker observation site if possible. Use a lower magnification eyepiece (e.g., 25mm) for fainter objects. |
| Image shakes excessively. | Unstable tripod or mount; windy conditions. | Ensure tripod legs are fully extended and locked. Place the telescope on a stable surface. Observe on calm nights. |
spésifikasi
- Ngaran modél: Orion SpaceProbe II 76mm Altazimuth Reflector Telescope
- Jumlah modél: 10277
- Desain optik: Reflektor
- Aperture: 76mm (3 inci)
- Eyepieces: 25mm Kellner (1.25"), 10mm Kellner (1.25")
- Fokus: Rak-jeung-Pinion 1.25"
- Finderscope: Red-Dot Reflex Sight
- Tipe Gunung: Altazimuth
- Tripod: Adjustable Aluminum
- Beurat barang: 7 pon (kira-kira 3.17 kg)
- Ukuran produk: 33 x 55 x 55 inci (kira-kira 83.8 x 139.7 x 139.7 cm)
- Power Source (for Red-Dot Sight): 1 batré Litium Metal (diperlukeun)
Garansi sareng Rojongan
For warranty information or technical support, please contact Orion customer service. Refer to the product packaging or the official Orion websitus pikeun detil kontak panganyarna.
Sumberdaya Online: For additional tips, guides, and frequently asked questions, visit the Orion support page.





