TECKNET WA888 70867 Wireless Doorbell System

Bubuka

Thank you for choosing the TECKNET WA888 70867 Wireless Doorbell System. This manual provides detailed instructions for installation, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your device. Please read this manual thoroughly before use and retain it for future reference.

Image: The TECKNET WA888 70867 Wireless Doorbell System, featuring two black plug-in receivers with blue LED rings and one compact black push button with a blue LED ring and bell icon.

Eusi pakét

Punten parios yén sadaya komponén aya dina pakét anjeun:

• 1 x Tombol Push Bel Panto Nirkabel (Pamancar)
• 2 x Plug-in Receivers (Chimes)
• Mounting Hardware (Screws, Wall Anchors, Adhesive Tape)
• Manual pamaké

Setup sareng Instalasi

Follow these steps to set up your TECKNET Wireless Doorbell system:

1. Install the Push Button (Transmitter):
   • Choose a suitable location near your door, ensuring it is flat and clean.
   • You can use the provided adhesive tape for a quick installation or screws and wall anchors for a more secure mounting.
   • Ensure the push button is installed in a location where it is protected from direct heavy rain, although it is IP65 rated for water resistance.
2. Install the Receivers (Chimes):
   • Plug the receivers into standard wall outlets in desired locations within your home. Consider central locations for optimal sound distribution.
   • The system boasts a 400-meter wireless range in open areas, allowing flexibility in receiver placement.
3. Pairing (Pre-paired from factory):
   • The push button and receivers are pre-paired at the factory. Test the system by pressing the push button. The receiver(s) should chime.
   • If re-pairing is needed (e.g., adding a new component or after a reset), refer to the "Operating Instructions" section for pairing steps.

Image: Diagram illustrating the dimensions of the doorbell components (push button and receivers) and highlighting the volume control, chime selection, and LED indicator ring on the receiver. The push button is shown with a "PUSH" label.

Image: An illustration demonstrating the 400-meter wireless range of the TECKNET doorbell system, showing a push button outside a house and receivers inside, with a visual representation of the signal reaching far distances.

Parentah Operasi

Your TECKNET doorbell offers various customization options:

• Pilihan Chime:

  The receiver features a "Chime Selection" button. Press this button repeatedly to cycle through the 60 available chime tunes until you find your preferred melody.
• Kontrol volume:

  Locate the "Volume Control" button on the receiver. Press it to adjust the volume level. There are 5 adjustable volume levels, ranging from 0dB (mute) to 120dB.

• Modeu Gawé:

  The receiver supports 3 working modes: Sound Only, Flash Only, and Sound & Flash. Use the dedicated mode button to switch between these options. The "Flash Only" mode is particularly useful for quiet environments or for individuals with hearing impairments.

• Modeu Bisu:

  For situations requiring silence, such as during baby's nap time, activate the mute mode. This mode typically disables the sound while still providing a visual alert (flash) when the doorbell is pressed.

Image: An infographic highlighting the key features of the TECKNET doorbell receiver, including 60 chime tunes, 5 volume levels, 3 working modes (Sound Only, Flash Only, Sound & Flash), and a volume range of 0-120 dB. It also shows the FCC, CE, and RoHS certifications.

Image: An illustration depicting the "Mute Mode" feature, showing a sleeping baby and the doorbell receiver, emphasizing its use for quiet environments.

Pangropéa

To ensure the longevity and proper functioning of your doorbell system:

• beberesih: Wipe the doorbell push button and receivers with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Battery Replacement (Push Button): The push button is designed for a long lifespan (up to 4.5 years). When the push button's LED indicator no longer lights up or the signal becomes weak, it's time to replace the internal battery. Refer to the product packaging or TECKNET support for the specific battery type.
• Perlindungan Lingkungan: While the push button is IP65 waterproof, extreme temperatures can affect battery life. The optimal operating temperature range is -20°C to 60°C (-4°F to 140°F).

Image: An illustration highlighting the IP65 waterproof rating of the doorbell push button, its operating temperature range (-4°F/-20°C to 140°F/60°C), and an estimated maximum lifespan of 4.5 years.

Pamérésan masalah

If you encounter issues with your doorbell system, try the following solutions:

spésifikasi

• merek: TAKEUN
• Jumlah modél: WA888 / 470867
• warna: Hideung
• Jangkauan nirkabel: Nepi ka 400 méter (di tempat terbuka)
• Nada rengkuh: 60 mélodi dipilih
• Tingkat volume: 5 tingkat (0dB dugi ka 120dB)
• Modeu Gawé: Sound Only, Flash Only, Sound & Flash
• Rating Tahan Cai (Tombol Pencét): IP65
• Suhu operasi: -20°C nepi ka 60°C (-4°F nepi ka 140°F)
• Estimated Push Button Lifespan: Nepi ka 4.5 taun

Garansi sareng Rojongan

TECKNET products are designed for reliability and performance. For warranty information or technical support, please refer to the warranty card included with your product or visit the official TECKNET website. Please have your model number (WA888 / 470867) and purchase details ready when contacting support.

For further assistance, you may also refer to the product page on Amazon.com.be: TECKNET WA888 70867 Product Page