ROBOTIME Walking T-Rex Dinosaur 3D Wooden Puzzle: Instruction Manual

1. Bubuka

Thank you for choosing the ROBOTIME Walking T-Rex Dinosaur 3D Wooden Craft Kit Puzzle. This kit allows you to construct a detailed wooden model of a T-Rex that responds to sound with walking and roaring actions. This manual provides essential information for assembly, operation, and maintenance to ensure a successful and enjoyable experience.

2. Fitur Produk

• Sound-Activated Movement: The assembled T-Rex model walks and roars in response to sound.
• 3D Wooden Puzzle: Construct a detailed T-Rex model from pre-cut wooden pieces.
• Educational Craft Kit: Enhances creativity and practical ability through hands-on assembly.
• Desain Interaktif: Provides an engaging experience once assembled.

3. Eusi Paket

Punten parios yén sadaya komponén aya sateuacan ngamimitian ngarakit.

• Wooden Puzzle Sheets (pre-cut pieces)
• Unit Motor
• Instruksi Manual

4. Parentah Majelis

Follow these steps carefully to assemble your T-Rex model. Handle wooden pieces gently to prevent breakage.

1. Prepare Pieces: Carefully detach all wooden pieces from their sheets. Use sandpaper if necessary to smooth any rough edges.
2. Identipikasi komponén: Refer to the diagrams in the included manual to identify each piece by its number.
3. Assemble Core Body: Begin by constructing the central body structure, ensuring all interlocking tabs fit securely.
4. Integrate Motor: Install the motor unit into the designated compartment within the body. Ensure wires are routed correctly and connections are secure.
5. Pasangkeun Anggota Awak: Assemble and attach the legs, arms, and tail, paying close attention to the orientation of moving joints.
6. Construct Head: Assemble the head and jaw components, ensuring the jaw can move freely if designed to do so.
7. Sambungan ahir: Connect any remaining pieces and ensure all parts are firmly in place. Do not force pieces together.

5. Setup Awal

After assembly, the T-Rex requires batteries for operation.

1. Kompartemen batré: Locate the battery compartment on the T-Rex model, typically on its back or underside.
2. Selapkeun Batré: Insert the required number of AAA batteries (not included) according to the polarity indicators (+/-).
3. Tutup Kompartemen: Tutup panutup kompartemen batréna.

6. Parentah Operasi

The ROBOTIME Walking T-Rex is designed for sound-activated interaction.

1. Daya Hurung: Locate the power switch, usually near the battery compartment, and switch it to the 'ON' position.
2. Aktipkeun sora: Make a distinct sound, such as a clap or a loud voice, near the T-Rex. The model will respond by walking and emitting a roaring sound.
3. Perhatikeun Gerakan: The T-Rex will typically walk a short distance and roar before pausing, awaiting the next sound input.
4. Pareum listrik: When not in use, switch the power to 'OFF' to conserve battery life.

7. Pangropéa

Proper care will extend the life of your wooden T-Rex model.

• beberesih: Wipe the model gently with a dry, soft cloth. Avoid using water or cleaning solutions, as they can damage the wood.
• Panyimpenan: Store the model in a dry environment away from direct sunlight and extreme temperatures to prevent warping or fading of the wood.
• Perawatan batré: Cabut batré upami produk moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.
• Penanganan: Avoid dropping or applying excessive force to the model, as wooden pieces can break.

8. Cara ngungkulan

If you encounter issues with your T-Rex model, refer to the following common solutions:

9. Spésifikasi

10. Garansi jeung Rojongan

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official ROBOTIME websitus. Simpen bukti pameseran anjeun pikeun klaim garansi.