1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your KICKER CVR10 CompVR 10-Inch (250mm) Subwoofer. Please read this manual thoroughly before use to ensure optimal performance and longevity of your product.
Gambar 1.1: Hareupeun view of two KICKER CVR10 CompVR 10-inch subwoofers. These subwoofers feature a black cone with a red stitching accent around the perimeter and a central KICKER logo.
2. Émbaran Kasalametan
Salawasna perhatikeun pancegahan kaamanan di handap ieu:
- Cabut batré kendaraan sateuacan masang komponén audio naon waé pikeun nyegah korsleting listrik.
- Pastikeun sadaya kabel diisolasi sareng diamankeun kalayan leres pikeun nyegah karusakan sareng korsleting.
- Do not operate the subwoofer beyond its rated power handling capabilities to avoid damage.
- High sound pressure levels can cause permanent hearing loss. Use caution when adjusting volume levels.
- Consult a professional installer if you are unsure about any installation procedures.
3. Eusi Paket
Pastikeun yén sadaya item aya dina pakét anjeun:
- KICKER CVR10 CompVR 10-Inch (250mm) Subwoofer (Quantity: 1 or 2, depending on bundle)
- Mounting Screws (16 pieces, 1-5/8" wood screws)
- Manual Pitunjuk (dokumén ieu)
4. Setup jeung Instalasi
4.1 Pasang Subwoofer
The KICKER CVR10 CompVR subwoofer is designed for installation in a custom enclosure. Ensure the enclosure meets the recommended volume specifications for optimal performance.
- Diaméterna dipasang: 9-3/16 inci (23.3 cm)
- jerona dipasang: 5-1/2 inci (14 cm)
Use the provided 1-5/8" wood mounting screws to secure the subwoofer to the enclosure. Ensure a tight, airtight seal between the subwoofer frame and the enclosure.
Gambar 4.1: Sisi view of the KICKER CVR10 CompVR subwoofer, illustrating its mounting depth and overall profile. Ieu view highlights the robust surround and basket design.
4.2 Wiring Instructions (2-Ohm DVC)
The CVR10 CompVR features a 2-Ohm Dual Voice Coil (DVC) design. This allows for flexible wiring configurations to match various amplifier impedances. Always ensure your amplifier is stable at the final impedance load.
Single Subwoofer Wiring:
- Beban 1-Ohm (Kabel Paralel): Connect the positive terminals of both voice coils together, and the negative terminals of both voice coils together. Connect the amplifier's positive output to the combined positive terminals, and the amplifier's negative output to the combined negative terminals. This results in a 1-Ohm load.
- Beban 4-Ohm (Kabel Séri): Connect the positive terminal of one voice coil to the negative terminal of the other voice coil. Connect the amplifier's positive output to the remaining positive terminal, and the amplifier's negative output to the remaining negative terminal. This results in a 4-Ohm load.
Two Subwoofer Wiring (for a bundle):
When using two CVR10 CompVR subwoofers, various configurations are possible depending on the desired final impedance. Common configurations include:
- 0.5-Ohm Load: Wire each subwoofer for a 1-Ohm load (parallel), then wire the two 1-Ohm subwoofers in parallel. (Caution: Very few amplifiers are stable at 0.5 Ohms.)
- 2-Ohm Load: Wire each subwoofer for a 4-Ohm load (series), then wire the two 4-Ohm subwoofers in parallel. Alternatively, wire each subwoofer for a 1-Ohm load (parallel), then wire the two 1-Ohm subwoofers in series.
- 8-Ohm Load: Wire each subwoofer for a 4-Ohm load (series), then wire the two 4-Ohm subwoofers in series.
Salawasna rujuk ka anjeun amplifier's manual for its minimum stable impedance and recommended wiring configurations.
5. Parentah Operasi
5.1 Penanganan kakuatan
The KICKER CVR10 CompVR subwoofer has a recommended RMS power handling of 400 Watts and a peak power handling of 800 Watts. It is crucial to match your amplifier's output to these specifications to prevent damage and ensure optimal sound quality.
5.2 Rekomendasi dipager
The performance of your subwoofer is highly dependent on the enclosure it is installed in. The CVR10 CompVR works best in either sealed or ported (vented) enclosures. Refer to the specifications section for recommended enclosure volumes.
- Kandang Disegel: Provides tight, accurate bass response.
- Vented (Ported) Enclosure: Offers louder, more extended bass output at lower frequencies.
Consult KICKER's official resources or a professional installer for detailed enclosure design and tuning specific to your vehicle and listening preferences.
6. Pangropéa
The KICKER CVR10 CompVR subwoofer requires minimal maintenance to ensure long-term performance.
- beberesih: Use a soft, dry cloth to gently wipe down the cone and surround. Avoid using harsh chemicals or abrasive cleaners.
- Pamariksaan: Periodically check all wiring connections to ensure they are secure and free from corrosion. Inspect the subwoofer's surround for any signs of cracking or damage.
- Lingkungan: Ensure the subwoofer is installed in an environment free from excessive moisture, direct sunlight, and extreme temperatures.
7. Cara ngungkulan
Upami anjeun ngalaman masalah sareng subwoofer anjeun, tingal masalah sareng solusi umum ieu:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Taya sora tina subwoofer | Taya kakuatan pikeun amplifier, loose wiring, incorrect wiring, amplifier in protect mode, damaged subwoofer. | Cék amplifier power and ground connections. Verify all speaker wires are securely connected and correctly wired. Check amplifier's status indicator. Test subwoofer with a known good ampliifier lamun mungkin. |
| Bass menyimpang atanapi teu jelas | Gain set too high, incorrect crossover settings, enclosure issues, damaged subwoofer. | Ngurangan amplifier gain. Adjust low-pass filter (LPF) on amplifier or head unit. Ensure enclosure is sealed and properly constructed. Inspect subwoofer cone and surround for damage. |
| Subwoofer overheating | Kurang daya amplifier, overdriven subwoofer, incorrect impedance match. | Mastikeun amplifier provides sufficient RMS power. Avoid prolonged operation at maximum volume. Verify correct impedance wiring for your amppangagung. |
8. Spésifikasi
Detailed technical specifications for the KICKER CVR10 CompVR 10-Inch Subwoofer:
| Ngaran modél | CVR10 CompVR |
| Tipe Speaker | Subwoofer |
| Diaméter Subwoofer | 10 Inci (250mm) |
| Impedansi | 2 Ohms DVC (Dual Voice Coil) |
| Power Watts (Peak/RMS) | 800W Puncak / 400W RMS |
| Sensitivity (dB 1w/1m) | 83.6 dB |
| Pamasangan Jerona | 5-1/2 inci (14 cm) |
| Diaméterna Pamasangan | 9-3/16 inci (23.3 cm) |
| Volume Kotak Segel Min. | 0.8 ku. ft. (22.7 L) |
| Volume Kotak Segel Maks. | 3 ku. ft. (85 L) |
| Volume Kotak Ventilasi Min. | 1.25 ku. ft. (35.4 L) |
| Volume Kotak Ventilasi Maks. | 1.75 ku. ft. (49.6 L) |
| Ukuran produk (D x W x H) | 13"D x 24.13"W x 11.25"H (Bundle) |
| Item Beurat | 25.9 Pounds (Bundle) |
| Téhnologi konektipitas | Dikabel |
| Jenis Garansi | kawates |
9. Garansi jeung Rojongan
9.1 Émbaran jaminan
KICKER products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official KICKER websitus. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.
9.2 Rojongan Palanggan
For technical assistance, troubleshooting, or further inquiries, please contact KICKER customer support. You can find contact information and additional resources on the official KICKER websitus:
