Bubuka
This manual provides comprehensive instructions for the safe installation, operation, and maintenance of your V-TAC VT-5087 PIR Infrared Motion Sensor. Please read this manual carefully before installation and retain it for future reference. This sensor is designed for ceiling mounting and automatically controls lighting based on detected motion.
Fitur konci
- PIR (Passive Infrared) Motion Detection
- 360-degree Detection Angle
- Ceiling Mount Design
- Adjustable LUX (Ambient Light) Sensitivity
- Adjustable TIME Delay
- Maximum Load: 1000W (LED) / 2000W (Traditional Lighting)
Gambar 1: V-TAC VT-5087 PIR Infrared Motion Sensor. This image highlights the sensor's capabilities, including a maximum load of 1000W for LED lighting, automatic on/off based on motion, and a 'SUN' setting for daylight operation (only works when natural light is 3 lux or less). Detection motion speed is 0.6-1.5m/s.
Setup sareng Instalasi
Inpormasi Kaamanan Penting: Installation must be performed by a qualified electrician and in accordance with all local electrical codes. Ensure power is disconnected at the circuit breaker before beginning installation to prevent electric shock.
Lokasi pamasangan
- Choose a ceiling location where the sensor can cover the desired detection area without obstruction.
- Avoid mounting near heat sources (e.g., air vents, heaters) or direct sunlight, as these can cause false triggers.
- Ensure the mounting surface is stable and can support the sensor.
Parentah Wiring
- Pareuman catu daya utama dina pemutus sirkuit.
- Taliti miceun bagian luar casing of the sensor to access the wiring terminals.
- Connect the live (L), neutral (N), and load (L') wires according to the diagram provided on the sensor or in the packaging. Typically:
- L: Live input from power supply
- N: Neutral input from power supply and neutral to load
- L': Switched live output to the light fixture (load)
- Securely fasten the sensor to the ceiling using the provided screws and anchors.
- Ganti c luarasing.
- Restore power and test the sensor.
Gambar 2: Tukangeun view of the sensor, illustrating the wiring terminals (L, N, L') and the LUX and TIME adjustment knobs. Mounting screws and wall anchors are also shown.
Parentah Operasi
The V-TAC VT-5087 sensor features two adjustable controls: LUX and TIME. These allow you to customize the sensor's behavior to suit your environment and preferences.
Knobs adjustment
- LUX Control: This knob adjusts the ambient light threshold at which the sensor will activate.
- Turn towards the SUN symbol for activation in both daylight and darkness (e.g., >2000 LUX).
- Turn towards the BULAN symbol for activation only in low light conditions (e.g., <3 LUX).
- TIME Control: This knob sets the duration the light remains on after motion is detected and then stops.
- Adjust from minimum (approx. 10 seconds) to maximum (approx. 15 minutes).
- The timer resets if motion is detected again before the set time expires.
Gambar 3: Diwincik view of the easy-access control knobs for LUX adjustment and TIME adjustment. This image also indicates the rated load for LED lighting (up to 1000W) and traditional lighting (up to 2000W).
Detection Range and Angle
The sensor offers a 360-degree detection angle, making it suitable for central ceiling placement. The maximum detection distance is approximately 6 meters (up to 8 meters at <24°C). The detection motion speed is 0.6-1.5 m/s.
Gambar 4: Diagram showing the impressive detection features, including a 360-degree detection range, adjustable light intensity range (<3 to 2000 LUX), and a detection distance of 8 meters (up to 24°C). The time delay is adjustable from 10 seconds to 15 minutes.
Pangropéa
The V-TAC VT-5087 PIR sensor requires minimal maintenance. Follow these guidelines to ensure optimal performance and longevity:
- beberesih: Gently wipe the sensor lens and housing with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the unit.
- Halangan: Periodically check that there are no new obstructions (e.g., furniture, decorations) blocking the sensor's field of view.
- kakuatan: Always disconnect power before performing any cleaning or inspection to prevent electric shock.
Pamérésan masalah
If you experience issues with your V-TAC VT-5087 PIR sensor, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampuna teu hurung nalika aya gerakan nu kadeteksi. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is too short or inconsistent. |
|
|
Spésifikasi teknis
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | VT-5087 |
| merek | V-TAC |
| Warna | Hideung |
| Sumber Daya | Kabel Listrik |
| Frékuénsi | 60 Hz |
| Tipe Pamasangan | Gunung siling |
| Rentang deteksi maksimum | 6 Meters (up to 8 meters at <24°C) |
| Sudut deteksi | 360 darajat |
| Time Reureuh adjustment | Min. 10s ± 3s / Max. 15min ± 2min |
| Light Intensity Range (LUX) | <3 nepi ka 2000 LUX (Adjustable) |
| Deteksi Gerak Speed | 0.6-1.5 m / s |
| Rated Load (LED) | Max 1000W |
| Rated Load (Traditional Lighting) | Max 2000W |
| Suhu Operasi | 15 Degrees Celsius (Note: This seems like a minimum or specific test temperature, not a range.) |
| Peunteun IP | IP20 |
Émbaran jaminan
This V-TAC VT-5087 PIR Infrared Motion Sensor comes with a garansi 2 taun ti tanggal pameseran. Garansi ieu ngawengku cacad dina bahan sareng padamelan dina panggunaan normal. Mangga simpen bukti pameseran anjeun pikeun klaim garansi. Garansi henteu ngawengku karusakan anu disababkeun ku pamasangan anu teu leres, salah panggunaan, kacilakaan, atanapi modifikasi anu teu sah.
Gambar 5: Product packaging for the V-TAC Infrared Motion Sensor, clearly indicating a 2-year warranty and other features like 360-degree detection, 6m distance, and IP20 rating.
Rojongan Palanggan
For further assistance, technical support, or warranty inquiries, please contact V-TAC customer service. Refer to the V-TAC official websitus atawa bungkusan produk Anjeun pikeun inpo kontak panganyarna.
V-TAC Websitus: www.v-tac.eu