Kanto YU6 Powered Bookshelf Speakers Instruction Manual

1. Bubuka

Thank you for choosing Kanto YU6 Powered Bookshelf Speakers. These speakers are designed to deliver high-quality audio with versatile connectivity options, including Bluetooth and an integrated phono preamp. This manual provides essential information for proper setup, operation, and care to ensure optimal performance and longevity of your speakers.

2. Naon dina Box

Upon opening your Kanto YU6 speaker package, you should find the following items:

• Kanto YU6 Powered Bookshelf Speakers (Pair)
• Jauh Control jeung accu
• Kabel listrik
• 3.5mm kabel AUX
• Kawat Speaker
• Buku Panduan pamaké
• Adhesive Rubber Feet (x8)

Video Unboxing

Video 1: An official Kanto Living video demonstrating the unboxing process for the YU6 speakers and their contents.

3. Fitur Produk

The Kanto YU6 speakers are equipped with several features designed to enhance your audio experience:

3.1. Remarkable Sound Quality

Enclosed in handcrafted MDF cabinets, the YU6 speakers feature 1-inch silk dome tweeters and 5.25-inch Kevlar drivers. This combination delivers crisp highs and a balanced mid-range, ensuring accurate reproduction of your audio.

3.2. Easy Streaming with Bluetooth

Built-in Bluetooth with Qualcomm aptX technology allows for high-quality wireless audio streaming from compatible devices such as smartphones, tablets, and laptops.

3.3. Vinyl-Ready Phono Preamp

An integrated phono preamp allows direct connection to any vintage or modern turntable, eliminating the need for an external preamp.

3.4. Signal Detection and Automatic Power-Up

The YU6 features automatic standby and power-up modes. This conserves power when not in use and ensures the speakers are ready to play when an audio signal is detected.

3.5. Kadali jauh

A comprehensive remote control provides full command over volume, input selection, tone (bass and treble), balance, and Bluetooth playback options.

Fitur Produk Leuwihview Video

Video 2: An official Kanto Living video detailing the features of the YU4 and YU6 Powered Speakers.

4. Setélan

4.1. Nempatkeun Speaker

Position your YU6 speakers on a stable, flat surface. For optimal stereo imaging, place them equidistant from your listening position and ensure they are at ear level. Avoid placing them too close to walls or corners, which can affect bass response.

4.2. Connecting Speaker Wire

The active speaker (left) connects to the passive speaker (right) using the included speaker wire. Ensure positive (+) terminals connect to positive (+) and negative (-) terminals connect to negative (-).

Video 3: An official Kanto Living video demonstrating how to properly connect speaker wire to Kanto speakers.

4.3. Nyambungkeun Sumber Audio

The YU6 speakers offer multiple input options on the rear panel:

• Input RCA: For connecting devices like CD players, DACs, or a turntable (use the Phono/Line switch).
• Optical (TOSLINK) Inputs (OPT1, OPT2): For digital audio sources such as TVs, computers, or game consoles.
• Input AUX: Pikeun nyambungkeun alat-alat anu nganggo kaluaran audio 3.5mm.
• Bluetooth: Pikeun sambungan nirkabel ka alat-alat anu nganggo Bluetooth.
• Sub Out: Connect an external powered subwoofer for enhanced bass.
• Port Muatan USB: For charging your mobile devices.

5. Parentah Operasi

5.1. Daya Hurung / Pareum

Use the power switch located on the rear panel of the active speaker to turn the unit on or off. The speakers will enter standby mode automatically after a period of inactivity and power on when a signal is detected.

5.2. Pamilihan Input

Cycle through the available inputs (RCA, AUX, Optical 1, Optical 2, Bluetooth) using the input selection button on the remote control or the volume knob on the front of the active speaker.

5.3. Papasangan Bluetooth

1. Select Bluetooth input using the remote or front knob.
2. On your device, search for 'Kanto YU6' in the Bluetooth settings.
3. Select 'Kanto YU6' to pair. A successful connection will be indicated by an audible tone.
4. To reset Bluetooth pairing, press and hold the Bluetooth reset button on the remote control.

5.4. Kontrol Volume sareng Nada

Adjust the master volume using the remote control or the front volume knob. The remote also allows for independent adjustment of bass and treble levels, as well as left/right balance.

6. Pangropéa

To maintain the appearance and performance of your Kanto YU6 speakers:

• beberesih: Use a soft, dry cloth to wipe down the speaker cabinets. Avoid abrasive cleaners or solvents.
• Lebu: Regularly dust the speaker grilles and drivers with a soft brush or microfiber cloth.
• panempatan: Ensure speakers are placed in a well-ventilated area, away from direct sunlight, heat sources, and moisture.
• Kabel: Periodically check all cable connections for security and wear.

7. Cara ngungkulan

If you encounter issues with your Kanto YU6 speakers, consider the following common solutions:

• Henteu aya sora: Check power connections, input selection, and volume levels. Ensure all audio cables are securely connected.
• Sora distort: Reduce the volume of the source device and the speakers. Check for loose speaker wire connections.
• Masalah Nyapasangkeun Bluetooth: Ensure the speakers are in Bluetooth mode and your device's Bluetooth is enabled. Try resetting the Bluetooth connection on both the speakers and your device.
• Humming/Buzzing: Ensure all cables are properly shielded and connected. Try moving the speakers or audio source away from other electronic devices.

For more detailed troubleshooting, refer to the full user manual or contact Kanto support.

8. Spésifikasi

9. Garansi jeung Rojongan

9.1. Émbaran jaminan

The Kanto YU6 speakers come with a Limited Warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions.

9.2. Rojongan produk

For technical assistance, troubleshooting, or further inquiries, please visit the official Kanto website or contact their customer support directly. Contact information can typically be found on the Kanto websitus atawa dina dokuméntasi kaasup.