Buku Panduan Pangguna Termostat Ruangan Digital Watts BT-DP

1. Bubuka

The Watts BT-DP Digital Programmable Room Thermostat is designed for regulating most heating installations, including boilers and heat pumps. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your device.

2. Produk Langkungview

This image displays the Watts BT-DP Digital Programmable Room Thermostat. It features a clear digital screen showing temperature and mode, along with intuitive control buttons for adjustment and selection.

Fitur konci:

• 2-wire thermostat with digital display.
• Temperature adjustment via +/- buttons.
• Ability to preview deposit or room temperature.
• Large, backlit screen for enhanced visibility.
• Simplified weekly programming using pictograms.
• Multiple operating modes: Comfort, Reduced, Frost Protection, Holiday, Timer, Stop.
• Catu daya: Batré AAA 2 x 1.5V.
• Output: Potential-free relay (250 VAC/5 A).
• Connection: 2-point pluggable terminal block.
• Temperature setting range: 5 °C to 30 °C.
• Circuit breaker up to 20 °C: 0.5 °C.
• Kelas panyalindungan: IP30.
• Optional: External flow sensor.

3. Setup jeung Instalasi

Installation should be performed by a qualified professional. Ensure power is disconnected before commencing any installation work.

3.1. Power Supply

• Insert 2 x 1.5V AAA batteries into the designated compartment. Observe correct polarity as indicated inside the compartment.

3.2. Sambungan Wiring

• Connect the thermostat to your heating system using the 2-point pluggable terminal block.
• Refer to your heating system's manual for specific wiring diagrams. The output is a potential-free relay (250 VAC/5 A).

3.3. Pamasangan

• Mount the thermostat in a suitable location, away from direct sunlight, drafts, or heat sources, to ensure accurate temperature readings.
• The device has an IP30 protection class, meaning it is protected against solid objects over 2.5mm but not against water.

4. Parentah Operasi

The large, backlit digital screen displays current temperature and operating status. Use the +/- buttons to adjust temperature settings and navigate menus.

4.1. Nyetel Suhu

• Pencét éta +/- tombol pikeun ningkatkeun atawa ngurangan suhu nu dipikahoyong.
• The temperature can be set within a range of 5 °C to 30 °C.

4.2. Jadwal Mingguan Programming

• The thermostat supports simplified weekly programming using pictograms.
• Consult the complete product manual for detailed, step-by-step instructions on setting up your personalized weekly schedule.

4.3. Modeu Operasi

To switch between modes, navigate through the menu using the appropriate buttons (refer to the full manual for specific button functions).

• Mode kanyamanan: Maintains a comfortable, user-defined temperature.
• Modeu ngurangan: Maintains a lower, energy-saving temperature.
• Mode panyalindungan ibun: Prevents freezing by maintaining a minimum temperature (e.g., 5 °C).
• Mode Libur: Sets a specific temperature for an extended period, useful when away from home.
• Modeu Timer: Allows for temporary temperature adjustments for a set duration.
• Modeu Eureun: Turns off heating control.

5. Pangropéa

5.1. Ngagantian batré

• Regularly check the battery level. Replace the 2 x 1.5V AAA batteries when the low battery indicator appears on the display.
• Ensure correct polarity during replacement.

5.2. beberesih

• Clean the thermostat's exterior with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical sprays.
• Ensure the thermostat's vents are free from dust and obstructions to maintain accurate temperature sensing.

6. Cara ngungkulan

• Taya Témbongkeun: Check battery installation and charge. Replace batteries if necessary.
• Maca Suhu Lepat: Ensure the thermostat is not exposed to direct sunlight, drafts, or heat sources. Verify proper mounting location.
• Heating Not Activating: Check the selected operating mode and set temperature. Ensure the thermostat is correctly wired to the heating system. Verify the relay output connection.
• Masalah Pemrograman: Refer to the detailed programming section in the complete product manual for step-by-step instructions.
• If problems persist after following these steps, contact Watts customer support or a qualified technician.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please refer to the official Watts websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran.