1. Bubuka
This manual provides essential information for the safe installation, operation, and maintenance of the BRYANT BD20/20 20A 120/240V 2P 10K Circuit Breaker. This device is designed to protect electrical circuits from overcurrent conditions, such as overloads and short circuits, by automatically interrupting the flow of electricity. Please read this manual thoroughly before installation or use to ensure proper function and safety.
2. Émbaran Kasalametan
PERHATOSAN: Electrical shock hazard. Installation and servicing of this circuit breaker must be performed by qualified personnel only. Always disconnect power at the main service panel before working on electrical circuits.
- Pastikeun sadaya kode listrik lokal sareng nasional diturutan salami instalasi.
- Pariksa voltage and current ratings of the circuit breaker match the requirements of the electrical system.
- Do not install or operate the circuit breaker if it appears damaged.
- Anggo alat pelindung diri (APD) anu merenah, kalebet sarung tangan anu diisolasi sareng kacamata kaamanan.
- Ulah ngaliwat atawaamper sareng mékanisme pelindung pemutus sirkuit.
3. Produk Langkungview
The BRYANT BD20/20 is a 2-pole, 20-amp circuit breaker designed for 120/240V applications. It features a 10,000 Ampere Interrupting Capacity (AIC), indicating its ability to safely interrupt high fault currents. The breaker is designed for plug-in mounting in compatible load centers.
This image displays the front of the BRYANT BD20/20 circuit breaker. It clearly shows the two red toggle switches, labeled "ON" and "OFF" for each pole. The brand "BRYANT" and model "BD20-20" are visible, along with "CU-AL SWD" indicating compatibility with copper and aluminum wiring. The UL listing information is also present at the top.
This image shows the bottom side of the BRYANT BD20/20 circuit breaker. Visible markings include "USE ONLY IN LISTED ENCLOSURE", "40 C CPL 60/75 C WIRE", and several patent numbers. The text "MADE IN U.S.A." is also clearly visible, indicating the country of manufacture.
This image displays the top side of the BRYANT BD20/20 circuit breaker. Key information includes the "TORQUE" specifications for wire connections: 14-10 AWG 20 IN.LBS., 8 AWG 25 IN.LBS., and 6-4 AWG 27 IN.LBS. The "CURRENT INTERRUPTING RATING" is also shown as "MAX. RMS SYM. AMPERES 10,000 AT 120/240 VOLTS AC".
4. Setup jeung Instalasi
PENTING: Ensure all power to the electrical panel is OFF before proceeding with installation. Use a voltage tester to confirm the absence of power.
- Pegatkeun daya: Locate the main service panel and turn off the main breaker to completely de-energize the panel.
- Aksés Panel: Taliti nyabut panutup panel listrik pikeun ngalaan bar beus jeung wiring.
- Penempatan Breaker: Identify an available slot on the bus bar that is compatible with the BD20/20's plug-in design.
- Pamasangan: Align the circuit breaker with the bus bar and firmly push it into place until it clicks securely. Ensure both poles are properly seated.
- Wiring: Connect the circuit wires to the appropriate terminals on the circuit breaker. For the BD20/20, connect the two hot wires to the respective screw terminals. Refer to Figure 3.3 for recommended torque specifications for wire gauges (14-10 AWG: 20 in-lbs, 8 AWG: 25 in-lbs, 6-4 AWG: 27 in-lbs).
- Sambungan Aman: Tighten the terminal screws to the specified torque to ensure a secure and safe electrical connection.
- Panel Reassembly: Replace the electrical panel cover, ensuring all screws are tightened.
- Pamulihan kakuatan: Hurungkeun breaker utama deui ON di panel layanan.
- Uji coba: Test the circuit protected by the newly installed breaker to confirm proper operation.
5. Parentah Operasi
The BRYANT BD20/20 circuit breaker operates with simple ON/OFF toggles. When the circuit breaker trips due to an overload or short circuit, the toggle will move to a central or "tripped" position, typically between ON and OFF.
- Pikeun ON: Push the red toggle(s) firmly to the "ON" position.
- Pikeun mareuman: Push the red toggle(s) firmly to the "OFF" position.
- To Reset a Tripped Breaker: First, push the toggle(s) completely to the "OFF" position. Then, push the toggle(s) firmly to the "ON" position. If the breaker immediately trips again, there may be a persistent fault in the circuit that requires professional attention.
6. Pangropéa
Circuit breakers like the BRYANT BD20/20 are generally maintenance-free. However, periodic visual inspection is recommended.
- Inspeksi taunan: Annually, or as required by local codes, have a qualified electrician inspect the circuit breaker and its connections for any signs of wear, corrosion, or overheating (discoloration).
- beberesih: Ensure the area around the circuit breaker within the panel is free from dust and debris. Do not use liquids for cleaning inside the electrical panel.
- Uji coba: While not typically required for residential breakers, some commercial or industrial applications may require periodic testing by a qualified professional.
7. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Breaker lalampahan sering. | Sirkuit overloaded, sirkuit pondok, atanapi sesar taneuh. | Ngurangan beban dina sirkuit. Cabut parabot. Mariksa kabel pikeun karuksakan. Upami masalah tetep, konsultasi ka tukang listrik anu mumpuni. |
| Breaker teu ngareset. | Persistent fault (short circuit/ground fault) or internal breaker damage. | Ensure the toggle is pushed fully to "OFF" before attempting to reset to "ON". If it still won't reset, do not force it. Call a qualified electrician. |
| Taya kakuatan pikeun sirkuit sanggeus instalasi. | Breaker not fully seated, loose wiring connections, or main power off. | Verify main breaker is ON. Ensure the BD20/20 is fully seated on the bus bar. Check wire connections for tightness (with power OFF). |
If you are unable to resolve an issue, or if you suspect a serious electrical problem, always contact a qualified and licensed electrician.
8. Spésifikasi
| Atribut | Nilai |
|---|---|
| Nomer modél | BD20/20 |
| merek | Bryant |
| Peunteun ayeuna | 20 Amps |
| Voltage Peunteun | 120 / 240V AC |
| Jumlah kutub | 2 |
| Kapasitas Interrupting (AIC) | 10,000 Amperes |
| Tipe Pamasangan | Pasang-In Gunung |
| Sirkuit Tipe Breaker | Standar |
| Dimensi produk | 3 x 1 x 3 inci |
| Beurat | 5.86 ons |
9. Garansi jeung Rojongan
Specific warranty information for the BRYANT BD20/20 circuit breaker is typically provided by the manufacturer or the point of purchase. Please refer to the documentation included with your purchase or contact Bryant customer support for details regarding warranty coverage and terms.
For technical support or inquiries, please contact Bryant customer service or a certified electrician.
