EVGA 750 N1 Power Supply User Manual

Bubuka

The EVGA 750 N1 Power Supply is designed to provide reliable and efficient power for your personal computer system. This unit is an excellent choice for budget-conscious builds, offering robust connections and essential protections for stable operation. Its ultra-quiet fan design ensures near-silent performance, making it a valuable component for any PC setup.

Figure 1: EVGA 750 N1 Power Supply and packaging.

Naon dina Box

Pastikeun yén sadaya komponén anu didaptarkeun di handap kalebet kana pakét anjeun:

• EVGA 750N1 Power Supply
• Kabel ATX
• Kabel EPS
• Kabel PCIE
• Kabel SATA
• Four-Pin Peripheral Cable
• Floppy Adaptor
• Kabel Daya AC
• Guide instalasi
• Power Supply Tester

Figure 2: Included power supply cables and accessories.

Setup sareng Instalasi

Follow these steps to properly install your EVGA 750 N1 Power Supply into your computer system:

1. Persiapan: Ensure your computer is completely powered off and unplugged from the wall outlet. Open your computer case to access the power supply mounting area.
2. Pasang Catu Daya: Carefully slide the EVGA 750 N1 Power Supply into the designated bay in your computer case. Secure it using the provided screws.
3. Nyambungkeun kabel:
   • Connect the 24-pin ATX cable to your motherboard's main power connector.
   • Connect the 8-pin (4+4) EPS cable to your motherboard's CPU power connector.
   • Connect the appropriate PCIe cables (6+2 pin) to your graphics card(s). The 750W model supports modern components with a single +12V rail providing 59A.
   • Connect SATA power cables to your storage drives (HDDs, SSDs) and optical drives.
   • Use the Four-Pin Peripheral (Molex) cables for any other components requiring this connection, such as case fans or older peripherals.
   • If needed, use the Floppy Adapter for legacy devices.
4. Manajemén Kabel: Rutekeun kabel kalayan rapih pikeun ningkatkeun aliran hawa sareng estetika dina casing anjeun.
5. Sambungan Akhir: Connect the AC Power Cable to the power supply's input port and then plug it into a wall outlet or surge protector. Ensure the power supply's main switch (located at the rear) is in the OFF position before plugging it in.
6. Daya Hurung: Flip the power supply's main switch to the ON position. Power on your computer.

Figure 3: Power supply with attached cables ready for connection.

Figure 4: Rear panel of the power supply with AC input and power switch.

Ngoperasikeun Power Supply

The EVGA 750 N1 Power Supply operates automatically once installed and powered on. It features a 120mm sleeve bearing fan that provides quiet and intelligent auto fan operation for near-silent performance under normal loads. The power supply is designed to deliver stable power to all connected components.

This power supply includes heavy-duty protections to safeguard your system:

• OVP (Leuwih Voltage panyalindungan): Protects components from excessive voltage.
• UVP (Dina Voltage panyalindungan): Prevents damage from insufficient voltage.
• OCP (Leuwih Perlindungan Ayeuna): Guards against excessive current draw on individual rails.
• OPP (Protéksi Daya Leuwih): Shuts down the PSU if total power draw exceeds safe limits.
• SCP (Protéksi Sirkuit Pendek): Ngajaga tina sirkuit pondok dina sistem.

Pangropéa

The EVGA 750 N1 Power Supply requires minimal maintenance. To ensure optimal performance and longevity:

• Ngaleungitkeun lebu: Periodically clean the power supply's fan and vents to prevent dust buildup, which can impede airflow and lead to overheating. Use compressed air for best results. Ensure the power supply is unplugged before cleaning.
• Kaayaan Lingkungan: Operate the power supply within its specified operating temperature range of 0°C to 25°C. Avoid exposing it to excessive humidity or extreme temperatures.

Pamérésan masalah

If you encounter issues with your EVGA 750 N1 Power Supply, consider the following common troubleshooting steps:

• Henteu aya kakuatan:
  • Pastikeun kabel daya AC disambungkeun pageuh kana catu daya sareng stop kontak dina témbok.
  • Verify that the power supply's main switch at the rear is in the ON position.
  • Pariksa naha stop kontak di témbok tiasa dianggo ku cara nyolokkeun alat anu sanés.
  • Confirm all internal power cables (24-pin ATX, EPS, PCIe, SATA) are firmly seated in their respective connectors.
• Instabilitas Sistem / Kacilakaan:
  • Pastikeun kabutuhan daya sistem anjeun henteu ngaleuwihan kapasitas catu daya 750W.
  • Check for proper ventilation within your PC case to prevent overheating of components, including the PSU.
  • Pariksa yén sadaya sambungan daya kana komponén aman.
• Sora anu teu biasa:
  • A quiet fan operation is normal. If you hear loud or grinding noises, ensure no cables are obstructing the fan.
  • If the noise persists, it may indicate a fan issue.

spésifikasi

Figure 5: Electrical specifications label on the power supply unit.

Garansi sareng Rojongan

The EVGA 750 N1 Power Supply comes with a standard 2-year warranty. For technical support, warranty claims, or additional information, please refer to the official EVGA websitus atanapi ngahubungan layanan palanggan maranéhanana langsung.

You can also find additional resources and support documents, including a detailed user manual, on the product's Amazon page or EVGA's support portal.

Pikeun pitulung salajengna, anjeun tiasa nganjang ka EVGA Store on Amazon.