Timeguard TS900N Immersion Controller Timeswitch User Manual

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your Timeguard TS900N 24-hour immersion heater timeswitch. Please read this document thoroughly before attempting installation or use to ensure safe and correct operation. Keep this manual for future reference.

Émbaran Kasalametan penting

Pamasangan ngan kedah dilaksanakeun ku tukang listrik anu mumpuni saluyu sareng peraturan kabel anu berlaku.
Always disconnect the mains supply before commencing any installation, maintenance, or wiring work.
Ensure all electrical connections are secure and correctly wired to prevent electric shock or fire hazards.
Do not exceed the maximum load rating of 13A (3kW) for this device.
This device is designed for indoor use only and must not be exposed to moisture or extreme temperatures.
Ulah nyobian ngarobih atanapi ngalereskeun unit nyalira. Serahkan sadaya perawatan ka tanaga anu mumpuni.

Fitur produk

The Timeguard TS900N is a reliable 24-hour mechanical timeswitch designed for efficient control of immersion heaters.

24-Hour Control: Allows setting of multiple ON/OFF periods over a 24-hour cycle.
Adjustable Switching Intervals: Features a minimum switching interval of 30 minutes, adjustable in 15-minute steps.
Kapasitas Beban Tinggi: Suitable for resistive loads up to 13 Amperes (3 kilowatts).
Pangaturan Gampang: User-friendly setting pins facilitate straightforward programming.
Manual Override: Includes a manual override switch for temporary control, bypassing programmed settings.

Eusi pakét

Mangga pariksa heula yén pakét anjeun ngandung barang-barang ieu:

1 x Timeguard TS900N Immersion Controller Timeswitch
1 x Manual Instruksi (Dokumén ieu)

Setup sareng Instalasi

Note: Installation must be performed by a qualified electrician and comply with all local and national wiring regulations.

Persiapan: Before beginning, ensure the mains power supply to the immersion heater circuit is completely switched off at the consumer unit (fuse box).
Pamasangan: Select a suitable, dry indoor location for the timeswitch, typically near the immersion heater or consumer unit. Secure the timeswitch to the wall using appropriate screws and wall plugs.
Wiring:
- Connect the incoming Live (L) wire from the mains supply to the terminal marked 'L IN'.
- Connect the incoming Neutral (N) wire from the mains supply to the terminal marked 'N IN'.
- Sambungkeun kabel Bumi (E) kana terminal Bumi.
- Connect the Live (L) wire going to the immersion heater to the terminal marked 'L OUT'.
- Connect the Neutral (N) wire going to the immersion heater to the terminal marked 'N OUT'.
Refer to the wiring diagram provided on the unit's internal casing or in the full installation guide for precise connections.
Sambungan Aman: Pastikeun sadaya sekrup terminal kenceng pageuh pikeun nyegah sambungan leupas sareng panas teuing.
Tutup Casing: Carefully replace the front cover of the timeswitch, ensuring it is properly seated and secured.
Daya Hurung: Restore mains power supply to the circuit at the consumer unit.

Timeguard TS900N Immersion Controller Timeswitch front view

Gambar 1: Hareupeun view of the Timeguard TS900N Immersion Controller Timeswitch, showing the dial, setting pins, and manual override switch.

Parentah Operasi

Nyetél Waktos Ayeuna: Rotate the outer dial clockwise until the current time aligns with the 'TIME' arrow indicator. The dial is marked in 24-hour format (e.g., 13 for 1 PM, 18 for 6 PM).
Programming ON/OFF Periods:
- The dial's circumference is divided into segments, with each segment representing 15 minutes.
- To set an 'ON' period, push the corresponding segment pins outwards.
- To set an 'OFF' period, ensure the corresponding segment pins are pushed inwards.
- Pikeun example, to have the immersion heater ON from 07:00 AM to 08:30 AM, push out all pins between the 07:00 and 08:30 markings on the dial.
Manual Override: The timeswitch includes a manual override switch, typically a slider or button, with positions such as 'ON', 'AUTO/TIMER', and 'OFF'.
- ON: Keeps the immersion heater continuously ON, overriding any programmed settings.
- AUTO/TIMER: Allows the timeswitch to operate according to the programmed ON/OFF settings. This is the standard operating mode.
- Pareuman: Keeps the immersion heater continuously OFF, overriding any programmed settings.
Consult the specific markings on your unit for exact override positions and their functions.

Pangropéa

beberesih: Wipe the exterior of the unit with a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the unit or cause electrical hazards.
Pamariksaan: Periodically inspect the timeswitch for any signs of physical damage, loose wiring, or discoloration. If any issues are observed, immediately disconnect power and consult a qualified electrician.
Henteu aya Bagian anu Bisa Dilayanan Pamaké: The internal components of the TS900N are not user-serviceable. Do not attempt to open the unit beyond accessing the wiring terminals during installation.

Pamérésan masalah

Masalah	Mungkin Cukang lantaranana	Solusi
Immersion heater not turning ON/OFF as programmed.	Incorrect current time setting; Pins not pushed out/in correctly; Manual override engaged.	Check and adjust the current time setting; Ensure pins are correctly set for desired ON/OFF periods; Set the manual override switch to 'AUTO' or 'TIMER'.
No power to the timeswitch.	Mains power supply is off; Loose wiring connection; Blown fuse or tripped circuit breaker.	Check the mains power supply to the circuit; Verify all wiring connections (consult a qualified electrician if unsure); Check the fuse or circuit breaker at the consumer unit.
Timeswitch making unusual noises (e.g., grinding, buzzing).	Internal mechanical fault.	Immediately disconnect power to the unit. Do not attempt to repair. Contact a qualified electrician or Timeguard customer support.

spésifikasi

model: TS900N
merek: Penjaga waktos
Voltage: 230V AC, 50Hz
Beban Max: 13A (3kW resistive)
Switching Intervals: 30 minutes minimum, adjustable in 15-minute steps
Bahan: palastik
warna: Bodas
Diménsi Produk (kira-kira): 19.68 "D x 19.68" W x 19.68" H (Note: These dimensions may refer to packaging. Actual unit dimensions are typically smaller.)
Beurat barang: 100 Gram (3.53 ons)
Batré diperlukeun: No
Komponén Kaasup: Timeswitch unit only.

Garansi sareng Rojongan

Timeguard products are designed for reliability and performance. For specific warranty terms and conditions, please refer to the official Timeguard websitus atanapi kartu garansi anu kalebet dina pameseran anjeun. Simpen bukti pameseran anjeun pikeun klaim garansi naon waé.

For technical assistance, troubleshooting beyond this manual, or to inquire about spare parts, please contact Timeguard customer support.

Timeguard Contact Information:

Websitus: www.timeguard.com
Palayanan palanggan: Rujuk kana website for regional contact details and support options.

	TS930 24 Hour Segment Immersion Heater Timeswitch - Operating Instructions & Specifications Detailed operating instructions and specifications for the Timeguard TS930 24-hour segment immersion heater timeswitch. Learn how to set ON/OFF periods, use manual override, and understand its technical capabilities for domestic appliances.
	Timeguard NTTHDA, NTTHDS, NTTHDM Digital Timeswitches: Installation and Operating Instructions Comprehensive guide for installing and operating Timeguard's 24 Hour / 7 Day Compact Digital Heavy Duty Timeswitches (models NTTHDA, NTTHDS, NTTHDM). Covers safety, technical specifications, installation steps for different versions, connection diagrams, battery, reset, clock setting, programming, loop functions, override, boost, and guarantee information.
	Pitunjuk Pamasangan sareng Operasi Saklar Waktu Éléktronik Timeguard TG77 24 Jam/7 Dinten Pitunjuk pamasangan sareng operasi anu lengkep pikeun Timeguard TG77 24 Jam/7 Dinten Electronic Timeswitch, anu ngawengku setelan, pamrograman, kaamanan, sareng spésifikasi.
	Pitunjuk Pamasangan sareng Operasi Saklar Waktos Digital Timeguard NTT06/NTT07 Comprehensive installation and operating instructions for the Timeguard NTT06 (24 Hour) and NTT07 (7 Day) digital time switches. Learn how to install, program, and use your digital timer for domestic applications.
	Timeguard FSTWIFITUTGV IP66 Wi-Fi Controlled Fused Spur Timeswitch Instalasi & Parentah Operasi Pamasangan lengkep sareng petunjuk operasi pikeun Timeguard FSTWIFITUTGV IP66 Wi-Fi Controlled Fused Spur Timeswitch, kalebet spésifikasi téknis, pedoman kaamanan, sareng prosedur papasangan aplikasi.
	Timeguard FST & NTT Series Timers FAQ Frequently Asked Questions for Timeguard FST and NTT series timers, covering troubleshooting for Fused Spur, Slimline, and WiFi models. Includes setup and operational guidance.