Bubuka
SurgeX ESP SEQ-1U mangrupikeun 20 Amp/120V power sequencer and conditioner designed to protect and manage power for sensitive audio/video systems. It ensures proper power-up and power-down sequences, preventing damaging pops, hissing sounds, and excessive inrush currents. This manual provides essential information for the safe and effective operation of your SEQ-1U unit.
Émbaran Kasalametan
PERHATOSAN:
- Ulah ngalaan unit ka hujan atawa Uap.
- Ulah muka casing; there are no user-serviceable parts inside. Refer all servicing to qualified service personnel.
- Pastikeun grounding ditangtoskeun pikeun nyegah shock listrik.
- Pegatkeun sambungan kakuatan samemeh nyieun sambungan atawa ngalakukeun pangropéa.
- Unit ieu dirancang pikeun panggunaan jero rohangan hungkul.
Produk Leuwihview
Panel hareup
Figure 1: Front Panel of the SurgeX ESP SEQ-1U
The front panel of the SEQ-1U features the SurgeX brand logo and model number. A central LCD display shows the unit's status, including voltage (e.g., "STATUS: ALL OFF 118V") and protection status (e.g., "PROTECTION: GOOD"). To the left of the display, a key switch with associated lock icons provides security. On the right, "SEL" and "ADJ" buttons are used for navigation and adjustment, alongside a prominent blue "POWER" button.
Fitur konci
- 20 Amp/120V Power Sequencer/Conditioner
- Adjustable 0-40 Second Sequence Delay
- 2 Always-on Outlets
- 3 Sequence Banks
- 8-outlet total capacity
- Advanced surge elimination
- EMI / RFI nyaring
- Ekstrim voltage panyalindungan
Disetél
Rék dipasang
The SEQ-1U is designed for standard 19-inch rack mounting. Secure the unit using appropriate rack screws (not included) to ensure stability. Allow adequate ventilation around the unit.
Sambungan Daya
- Ensure the main power switch on the SEQ-1U is in the OFF position.
- Connect the unit's power cord to a dedicated 20 Amp, 120V AC power outlet.
- Verify that the power source is stable and within the specified voltage rentang.
Alat Nyambungkeun
The SEQ-1U features two always-on outlets and three sequenced banks, each with two outlets.
- Connect equipment that requires constant power (e.g., network routers, media servers) to the "Always On" outlets.
- Connect equipment that should power on/off in a specific order (e.g., pre-ampliifiers, kakuatan amplifiers, projectors) to the sequenced outlets (Banks 1, 2, and 3).
- Refer to your system's specific power-up/down requirements to determine the correct sequencing order for your devices.
Parentah Operasi
Ngahurungkeun/Pareuman
- Insert the key into the key switch on the front panel and turn it to the "ON" position.
- Press the blue "POWER" button. The unit will begin its power-up sequence, activating the sequenced banks with the configured delays.
- To power off, press the blue "POWER" button again. The unit will initiate the power-down sequence in reverse order.
- For complete power disconnection, turn the key switch to the "OFF" position and/or unplug the unit from the wall outlet.
Adjusting Sequence Delay
The SEQ-1U allows adjustment of the delay between sequenced banks (0-40 seconds).
- Use the "SEL" button to navigate through menu options on the LCD display.
- Use the "ADJ" button to modify the selected value (e.g., sequence delay time).
- Consult the on-screen prompts for specific instructions on saving your custom settings in non-volatile memory.
Émbaran Pintonan LCD
The LCD display provides real-time status updates:
- STATUS: Indicates the current state of the outlets (e.g., "ALL OFF", "BANK 1 ON") and the input voltage.
- Perlindungan: Displays the status of the surge protection (e.g., "GOOD", "FAULT").
Pangropéa
- beberesih: Disconnect power before cleaning. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or aerosols.
- Ventilasi: Ensure that ventilation openings are not blocked. Proper airflow is crucial for preventing overheating.
- Manajemén Kabel: Keep power cables neatly organized and away from signal cables to prevent interference.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Unit teu hurung. | No power from wall outlet; key switch in OFF position; tripped circuit breaker. | Check wall outlet with another device; ensure key switch is ON; reset circuit breaker. |
| Equipment not powering on in sequence. | Incorrect connection to outlets; sequence delay set too long/short; unit in bypass mode. | Verify connections to sequenced banks; adjust sequence delay; ensure unit is in normal operating mode. |
| "PROTECTION: FAULT" displayed. | Internal protection circuit activated due to severe surge. | Disconnect all equipment, power cycle the unit. If fault persists, contact SurgeX support. |
spésifikasi
- model: SEQ-1U
- Masukan Voltage: 120V AC
- Kapasitas ayeuna: 20 Amp
- Outlet: 8 (2 Always-on, 6 Sequenced in 3 banks)
- Sequence Delay: Adjustable 0-40 detik
- Ukuran (L x W x H): 21.7 x 15.05 x 6.7 inci
- beurat: 16.65 pon
- Tipe Bahan: Tambaga
- Perlindungan Surge: Advanced Series Mode® surge elimination
- Nyaring: EMI / RFI nyaring
Garansi sareng Rojongan
For warranty information, technical support, or service inquiries, please contact SurgeX customer service. Refer to the official SurgeX websitus wéb atanapi dokuméntasi pameseran anjeun kanggo inpormasi kontak sareng syarat garansi anu pangénggalna.
Sumberdaya Online: Visit the SurgeX official websitus pikeun FAQs, pendaptaran produk, jeung bahan rojongan tambahan.
