PreSonus AIR10 Active Loudspeaker Instruction Manual

1. Bubuka

The PreSonus AIR10 is a compact and lightweight 2-way active sound-reinforcement loudspeaker designed to deliver rich low-end and natural high-frequency extension. Its enclosure is engineered for portability and versatility, fitting easily into various setups.

Key features of the AIR10 include:

• 10-inch custom low-frequency driver with 2-inch voice coil.
• 1-inch high-frequency compression driver.
• 90° horizontal dispersion x 60° vertical dispersion.
• Hybrid 1,200W power amplifier configuration (Class D for low-end, Class AB for high-frequency).
• Onboard mixer with two combo XLR and ¼” inputs, plus a stereo 1/8” input.
• Easy-to-use Digital Signal Processing (DSP) performance presets.

2. Émbaran Kasalametan

Before operating your PreSonus AIR10 loudspeaker, please read and understand all safety instructions. Retain this manual for future reference.

• Sumber Daya: Connect the unit only to a power supply of the type described in this manual or on the unit.
• Grounding: Pastikeun unitna dihubungkeun ka ground anu leres pikeun nyegah sengatan listrik.
• Ventilasi: Entong meungpeung lawang angin. Masang saluyu sareng pitunjuk pabrikan.
• Cai sareng Uap: Ulah make alat ieu deukeut cai atawa ngalaan eta kana netes atawa splashing.
• Panas: Entong dipasang di deukeut sumber panas sapertos radiator, register panas, kompor, atanapi aparat sanésna (kalebet ampLiifiers) anu ngahasilkeun panas.
• Palayanan: Rujuk sadayana ngalayanan ka tanaga jasa anu mumpuni. Pelayanan diperyogikeun nalika aparat parantos rusak sagala cara.
• Perlindungan dédéngéan: Paparan anu berkepanjangan ka tingkat tekanan sora anu luhur tiasa nyababkeun karusakan dédéngéan permanén. Anggo ati-ati nalika netepkeun tingkat polumeu.

3. Setélan

Proper setup ensures optimal performance and safety for your AIR10 loudspeaker.

3.1 Ngabongkar bungkusan

Carefully remove the AIR10 from its packaging. Inspect the unit for any signs of damage that may have occurred during shipping. If damage is found, contact your dealer or PreSonus immediately.

3.2 Nempatkeun na Mounting

The AIR10 is designed for versatile placement, including front-of-house (FOH), floor wedge monitoring, stand mounting, bracket mounting, or flown installations. Location presets optimize performance for these different configurations.

Gambar 1: Hareupeun view of the PreSonus AIR10 Active Loudspeaker.

Gambar 2: Sisi view of the PreSonus AIR10 Active Loudspeaker, showing integrated handles.

3.3 Sambungan Daya

Connect the provided power cord to the AC inlet on the rear panel of the AIR10 and then to a suitable grounded power outlet. Ensure the voltage selector switch matches your local power supply before powering on the unit.

3.4 Sambungan Input

The AIR10 features an onboard mixer with various input options:

• Mic/Line 1 & 2: Two combo XLR and ¼” inputs for microphones or line-level sources.
• Aux Di: A stereo 1/8” input for connecting portable media players or other consumer-level devices.
• Campur: An XLR output for sending the mixed signal to another AIR series loudspeaker or a subwoofer.

Figure 3: Rear panel of the PreSonus AIR10, showing input/output connections, level controls, DSP display, and power switch.

4. Nyuping

The AIR10 is designed for straightforward operation with powerful DSP controls.

4.1 Powering on / Pareum

After connecting the power cord, locate the power switch on the rear panel. Flip the switch to the 'ON' position. The front panel LED will illuminate to indicate power. Always power on your AIR10 after connecting all audio sources and power off before disconnecting.

4.2 Level Controls

Adjust the individual LEVEL knobs for Mic/Line 1 and Mic/Line 2 to set the input gain for your sources. The MASTER VOL knob controls the overall output level of the loudspeaker.

4.3 DSP Performance Presets

The AIR10 features easy-to-use DSP presets to optimize its performance for various applications. These presets include options for front-of-house use, floor wedge placement, music playback, enhanced low-end warmth, and improved speech intelligibility. Use the DSP button and display on the rear panel to navigate and select the appropriate preset for your environment.

4.4 Kadali EQ

The onboard EQ controls allow you to compensate for room anomalies and fine-tune the sound. Access these controls via the DSP menu to adjust frequency response as needed for your specific acoustic space.

4.5 Pidéo Dilanjutkeunview

5. Pangropéa

Regular maintenance helps prolong the life and performance of your AIR10 loudspeaker.

• beberesih: Use a soft, dry cloth to clean the exterior of the loudspeaker. Do not use abrasive cleaners, waxes, or solvents.
• Grille: Periodically check the front grille for dust or debris accumulation. Gently clean with a soft brush or vacuum if necessary.
• Panyimpenan: When not in use for extended periods, store the loudspeaker in a dry, temperature-controlled environment, ideally in its original packaging or a protective cover.

6. Cara ngungkulan

This section addresses common issues you might encounter with your AIR10 loudspeaker.

6.1 Taya Daya

• Check that the power cord is securely connected to both the loudspeaker and the power outlet.
• Pariksa yén outlet listrik aktip.
• Pastikeun voltage selector switch on the rear panel is set correctly for your region.
• Check the fuse on the rear panel. Replace if blown with a fuse of the correct type and rating.

6.2 Taya Sora

• Confirm the loudspeaker is powered on and the front LED is illuminated.
• Check all audio cable connections from your source to the AIR10 inputs.
• Ensure the input LEVEL knobs and the MASTER VOL knob are turned up.
• Verify that your audio source is active and producing sound.
• If using the Mix Out, ensure the connected device is receiving a signal and its volume is adjusted.

6.3 Ngahiung atawa Noise

• Reduce the input gain (LEVEL knobs) if the input signal is too strong.
• Pastikeun sadaya kabel dina kaayaan anu saé sareng dilindungan kalayan leres.
• Try connecting the loudspeaker to a different power outlet to rule out ground loop issues.
• Disconnect all inputs and listen for the noise. If the noise persists, the issue may be internal.

7. Spésifikasi

8. Naon dina Box

Your PreSonus AIR10 package should contain the following items:

• PreSonus AIR10 10" 2-Way Active Sound-Reinforcement Loudspeaker
• Kabel listrik
• Product Documentation (including this manual)

9. Garansi jeung Rojongan

PreSonus provides a limited warranty for the AIR10 loudspeaker. For detailed warranty information, please refer to the warranty card included with your product or visit the official PreSonus websitus.

For technical support, product registration, or to access additional resources, please visit the PreSonus support page or contact their customer service directly. Keeping your product registered can facilitate warranty claims and support.