VONETS VAP11G-500 Industrial Wireless Repeater/Bridge User Manual

1. Produk Langkungview

The VONETS VAP11G-500 is an industrial-grade wireless device designed for various networking applications. It functions as a WiFi repeater, AP client, bridge, booster, and extender, offering 300Mbps high-speed transmission and strong coverage. This device is suitable for challenging environments such as elevators, factories, and farms, facilitating video transmission and long-range WiFi coverage projects.

Image 1.1: The VONETS VAP11G-500 device with its integrated USB power and RJ45 Ethernet cables.

Fitur konci:

• Professional Intelligent WiFi repeater/extender/bridge, signal booster/amppangagung.
• High-power mode transmission distance: up to 200 meters (without obstacles and for small data); Video transmission: less than 50 meters.
• Suitable for use in elevators, factories, farms, and similar environments for video transmission or long-range WiFi coverage projects.
• Easy three-step setup process.
• Supports WPA-PSK/WPA2-PSK, 64/128/WEP security mechanisms.
• Supports 2.4Ghz, 802.11b/g/n wireless transmission protocol, 300Mbps high-speed transmission.
• Masukan Voltage: DC5V-15V, designed to reduce electronic waste by not requiring a special power source.

2. Eusi Paket

Mangga parios heula sadaya barang anu didaptarkeun di handap ieu kalebet kana pakét anjeun. Upami aya barang anu leungit atanapi ruksak, mangga ngahubungi layanan palanggan.

• VONETS VAP11G-500 Industrial Wireless Repeater/Bridge device (with integrated USB power and RJ45 Ethernet cables)
• anteneu
• Manual pangguna (dokumén ieu)

3. Spésifikasi

Image 3.1: The compact size of the VAP11G-500, shown next to a bank card for scale.

4. Setup jeung Konfigurasi

The VAP11G-500 can be configured via a computer or a smartphone. Ensure the device is powered correctly before starting the configuration process.

4.1 Powering Alat

1. Connect the USB power cable of the VAP11G-500 to a 5V/2A power source (e.g., a computer USB port or a USB power adapter).
2. Observe the LED indicator on the device. It should flash normally, indicating it is powered on.

4.2 Configuration via Computer

1. Connect the VAP11G-500's RJ45 Ethernet cable to your computer's Ethernet port.
2. Buka a web browser dina komputer Anjeun.
3. In the address bar, enter the configured domain http://vonets.cfg or the IP address 192.168.254.254 terus pencét Lebetkeun.
4. When prompted, enter the User ID and password. Both are typically "admin". Click "Login".
5. Navigate to the "Scan Hotspots" section. The device will search for available WiFi networks.
6. Select the desired WiFi hotspot from the list and click "Next".
7. Enter the password for the selected WiFi hotspot.
8. Click "Apply" and then "Reboot". The device will reboot, which may take about 1 minute. Wait until the LED light flashes normally.
9. Once rebooted, the device should be connected to the internet. You can verify by opening a websitus dina panyungsi anjeun.

4.3 Configuration via Smartphone

1. Ensure the VAP11G-500 is powered on.
2. On your smartphone, go to WiFi settings and search for available networks.
3. Find the WiFi network (SSID) of the VAP11G-500. The SSID typically starts with "VONETS_2.4G_XXXX" where XXXX corresponds to the last four digits of the device's MAC address (found on the back of the device).
4. Connect to this network. The default password is "12345678".
5. Buka a web browser on your smartphone.
6. Dina palang alamat, lebetkeun http://vonets.cfg or 192.168.254.254 terus pencét Lebetkeun.
7. Enter the User ID and password, both typically "admin". Click "Login".
8. Navigate to the "Scan Hotspots" section.
9. Select the desired WiFi hotspot from the list and click "Next".
10. Enter the password for the selected WiFi hotspot.
11. Click "Apply" and then "Reboot". The device will reboot.
12. After reboot, reconnect your smartphone to the VAP11G-500's configured WiFi network (the SSID will be the same as the source WiFi SSID, e.g., H3C_VONETS_2.4G_30). The password will be the same as the source WiFi hotspot's password.
13. You can now enjoy WiFi Internet.

5. Modeu Operasi

The VAP11G-500 supports multiple operating modes to suit various networking needs:

• WiFi Repeater: Extends the range of an existing WiFi network.
• AP Client: Connects a wired device to a wireless network.
• Sasak: Connects two wired networks wirelessly or extends a wireless network to a wired device.
• Booster/Extender: Enhances WiFi signal strength and coverage.

Image 5.1: Diagram illustrating the high-power WiFi bridge/repeater functionality with a range of up to 200 meters.

Image 5.2: Application of VAP11G-500 in WiFi Bridge mode, connecting a network camera to a router and monitoring display.

Image 5.3: Wireless monitoring application connection diagram (Case 1), showing multiple cameras connected via a switch to the VAP11G-500 for extended range.

Image 5.4: Application diagram demonstrating how two VAP11G-500 devices can extend network coverage between two buildings (House 1 and House 2) to a control center.

6. Pangropéa

• Simpen alat dina tempat anu tiis, garing, jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Ulah ngalaan alat ka cai atawa Uap.
• Bersihkeun alat sacara rutin nganggo lawon anu lemes sareng garing. Entong nganggo pembersih cair atanapi aerosol.
• Pastikeun ventilasi ditangtoskeun pikeun nyegah overheating.
• Pariksa périodik pikeun apdet firmware dina produsén urang websitus pikeun mastikeun kinerja optimal sarta kaamanan.

7. Cara ngungkulan

If you encounter issues with your VAP11G-500, refer to the following common troubleshooting steps:

• Teu Aya Daya/LED Pareum:
  • Ensure the USB power cable is securely connected to a 5V/2A power source.
  • Coba port USB atawa adaptor kakuatan béda.
• Teu Bisa Ngaksés Kaca Konfigurasi:
  • Verify that your computer or smartphone is directly connected to the VAP11G-500 via Ethernet (for computer) or its default WiFi SSID (for smartphone).
  • Confirm that you are entering the correct domain (http://vonets.cfg) or IP address (192.168.254.254).
  • Ensure your computer's network adapter is set to obtain an IP address automatically (DHCP).
  • Coba mupus cache browser anjeun atanapi nganggo browser anu sanés.
• No Internet Connection After Configuration:
  • Double-check the WiFi hotspot password entered during configuration. A single incorrect character will prevent connection.
  • Ensure the source WiFi hotspot is active and providing internet access.
  • Reboot both the VAP11G-500 and your main router.
  • Verify that the VAP11G-500's operating mode (e.g., Repeater, Bridge) is correctly set for your network topology.
• Sinyal Goréng/Lambat:
  • Relocate the VAP11G-500 closer to your main router or the area requiring extended coverage.
  • Minimize obstacles (walls, large metal objects) between the VAP11G-500 and the source WiFi.
  • Check for interference from other 2.4GHz devices (e.g., cordless phones, microwaves).
• Device Not Responding (Hard Reset):
  • If the device becomes unresponsive, you may need to perform a factory reset. Refer to the full product manual or manufacturer's website for specific instructions on how to perform a hard reset, as this will revert all settings to default.

8. Garansi jeung Rojongan

For warranty information, technical support, or further assistance, please contact Vonets customer service. Details can typically be found on the product packaging or the official Vonets websitus.

Pabrikan: Shenzhen Houtian Network Communication Technology Co., Ltd.

Websitus: www.vonets.com