TECKNET WA838 Wireless Doorbell Kit Instruction Manual

Bubuka

Thank you for choosing the TECKNET WA838 Wireless Doorbell Kit. This kit provides a reliable and convenient solution for your home or office, ensuring you never miss a visitor. Featuring a waterproof push button transmitter and plug-in receivers, this system offers a wide operating range, multiple melodies, and adjustable volume levels. Please read this manual carefully before installation and use to ensure proper operation and longevity of your device.

Image: The TECKNET WA838 Wireless Doorbell Kit, showing one push button transmitter and two plug-in receivers.

Eusi pakét

Mangga parios pakét kanggo barang-barang ieu:

• 1 x Wireless Push Button Transmitter
• 2 x Plug-in Chime Receivers
• 1 x Pita napel dua sisi
• 2 x Screws and Wall Plugs (for optional mounting)
• 1 x Manual Pamaké (dokumén ieu)

Setup sareng Instalasi

Transmitter Installation (Push Button)

1. Nyiapkeun Pemancar: The transmitter is pre-installed with a battery. Ensure the battery insulation tab (if present) is removed.
2. Pilih Lokasi: Select a flat, vertical surface near your door where the transmitter will be easily accessible to visitors. Ensure the surface is clean and dry.
3. Pilihan Pasang:
   • Adhesive Tape (Recommended for easy installation): Peel off one side of the double-sided adhesive tape and stick it firmly to the back of the transmitter. Peel off the other side and press the transmitter firmly onto the chosen surface for at least 30 seconds.
   • Screws (Recommended for enhanced security): Buka pemancar casing (if applicable, usually by prying gently from the bottom). Mark the screw holes on the wall. Drill pilot holes, insert wall plugs, and then secure the transmitter base with screws. Close the casing.
4. Rating waterproof: The transmitter is rated IP33 waterproof, suitable for outdoor use. However, avoid direct exposure to heavy rain or prolonged submersion.

Receiver Installation (Chime Unit)

1. Pilih Lokasi: Select a standard electrical outlet inside your home or office. Consider central locations for optimal sound distribution.
2. Colokkeun: Simply plug the chime receiver into the chosen electrical outlet. No batteries are required for the receiver.
3. Multiple Receivers: If you have multiple receivers, plug them into different outlets in areas where you want to hear the doorbell chime.

Parentah Operasi

Ngarobah Melodi

• Pencét éta Tombol Pamilihan Melodi (often located on the side of the receiver) to cycle through the 52 available melodies.
• Stop pressing when you hear your desired melody. The receiver will remember your selection even after being unplugged.

Nyaluyukeun Volume

• Pencét éta Tombol Kontrol Volume (often located on the side of the receiver) to cycle through the 4 adjustable volume levels (ranging from 52dB to 85dB).
• Select the volume level that best suits your environment. The receiver will remember your selection.

Visual Alert (Flashing Light)

• When the push button is pressed, the transmitter will flash a blue LED light.
• Simultaneously, the receiver will also flash a blue LED light, providing a visual alert in addition to the audible chime. This feature is particularly useful for individuals with hearing impairments.

Pairing Additional Transmitters/Receivers (If applicable)

Your kit comes pre-paired. If you purchase additional TECKNET WA838 components or need to re-pair them:

1. Colokkeun panarima.
2. Pencét jeung tahan tombol Tombol Kontrol Volume on the receiver for approximately 5 seconds until you hear a "ding" sound and the LED indicator starts flashing. This indicates the receiver is in pairing mode.
3. Immediately press the push button on the transmitter. The receiver will chime, indicating successful pairing.
4. To pair multiple transmitters with one receiver, repeat steps 2 and 3 for each additional transmitter.
5. To pair one transmitter with multiple receivers, repeat steps 2 and 3 for each additional receiver.

Pangropéa

• Transmitter Battery Replacement: The transmitter uses a standard 12V 23A alkaline battery. When the LED indicator on the transmitter no longer lights up or the range decreases significantly, it's time to replace the battery.
  1. Taliti muka pamancar casing.
  2. Remove the old battery and insert a new 12V 23A battery, ensuring correct polarity (+/-).
  3. Tutup casing aman.
• beberesih: Ngusap unit bel panto ku lawon lemes, garing. Ulah make cleaners abrasive atawa pangleyur.
• Kaayaan Lingkungan: While the transmitter is waterproof, extreme temperatures or prolonged direct sunlight can affect battery life and performance.

Pamérésan masalah

spésifikasi

• model: WA838
• Operasi Voltage (Receiver): AC 110-240V
• Battery (Transmitter): Batré Alkali 12V 23A
• Frékuénsi operasi: Frékuénsi Radio
• Rentang Operasi: Nepi ka 300 méter (900 suku) dina hawa kabuka
• Selectable Melodies: 52
• Tingkat volume: 4 tingkat (52dB dugi ka 85dB)
• Rating Tahan Cai (Pemancar): IP33
• Fitur husus: Flashing LED indicator, Memory function for melody and volume, 64,000 anti-interference codes
• warna: Hideung

Garansi sareng Rojongan

TECKNET provides an 18-month warranty for this product, covering manufacturing defects from the date of purchase. This warranty does not cover damage caused by misuse, accidents, unauthorized modifications, or normal wear and tear.

For technical support, warranty claims, or any questions regarding your TECKNET WA838 Wireless Doorbell Kit, please contact TECKNET customer service. Contact information can typically be found on the product packaging or the official TECKNET websitus.

Punten mertahankeun bukti pameseran anjeun pikeun tujuan garansi.