Manual Pangguna Timer Digital 7 Dinten 2-Stop Kontak Jero Ruangan CJ Tech 605

1. Bubuka

This manual provides comprehensive instructions for the safe and efficient operation of your CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer. Please read this manual thoroughly before using the device and retain it for future reference.

The CJ Tech 605 is designed to automate the on/off cycles of indoor electrical devices, offering convenience and energy savings through its programmable 7-day digital timer and two grounded outlets.

2. Parentah Kasalametan penting

• Kanggo dianggo di jero rohangan hungkul. Ulah kakeunaan kalembaban atanapi suhu anu ekstrim.
• Do not exceed the electrical ratings of the timer. Refer to the specifications section for details.
• Pastikeun timer dipasang pageuh kana stop kontak anu di-ground.
• Do not use with appliances that could cause a hazardous condition if left unattended, such as heating appliances.
• Do not disassemble or attempt to repair the timer. Contact qualified service personnel for assistance.
• Jauhkeun tina jangkauan barudak.

3. Eusi Paket

• 1 x CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer
• 1 x Manual Pamaké (dokumén ieu)

4. Fitur Produk

The CJ Tech 605 timer offers the following key features:

• 2 Stop Kontak anu Ditanam: Control two devices simultaneously.
• 7-Day Digital Programming: Set custom on/off schedules for each day of the week.
• Bisa diprogram: Create multiple on/off programs.
• Astronomical Features: Automatically adjusts to sunrise/sunset times (specific implementation details may vary, refer to programming section).
• Manual Override: Temporarily switch devices on or off without affecting programmed settings.
• Built-in Battery Backup: Nahan setélan salila kakuatan outages.

Gambar 1: The CJ Tech 605 2-Outlet Indoor 7-Day Digital Timer shown in its retail packaging. The timer is white with a digital display and four control buttons: ON/OFF, SET, -/RDM, and +/AUTO. The packaging highlights its features: 2 outlets, 7-day digital timer, programmable, and astronomical features.

5. Setup jeung Instalasi

1. Ngabongkar: Taliti piceun timer tina bungkusan na.
2. Muatan Awal: Plug the timer into a standard 120V AC grounded wall outlet for at least 30 minutes to charge the internal battery backup. The display should illuminate.
3. Setel Waktos Ayeuna: Before programming, set the current time and day. Refer to the "Operating Instructions" section for details on using the SET and +/- buttons.
4. Sambungkeun Alat: Plug the appliances you wish to control into the two grounded outlets on the timer. Ensure the appliances' power switches are in the "ON" position if you want the timer to control their power.

6. Parentah Operasi

The timer features a digital display and four control buttons:

• ON/OFF: Manually turns the connected devices on or off, overriding current program settings temporarily.
• SET: Used to enter programming mode for setting time, day, and on/off schedules.
• -/RDM: Decreases values during setting. Also activates/deactivates Random mode (RDM) for security lighting.
• +/AUTO: Increases values during setting. Also switches between Manual ON, Manual OFF, and AUTO modes.

6.1. Nyetél Waktos sareng Dinten Ayeuna

1. Pencét jeung tahan tombol SET tombol dugi tampilan hurung.
2. Ngagunakeun éta +/OTOMATIS or -/RDM buttons to adjust the current hour. Press SET pikeun mastikeun.
3. Repeat for minutes and then for the current day of the week.
4. Pencét SET deui pikeun kaluar ti modeu setelan waktu.

6.2. Manual Override

Pencét éta ON/OFF button to cycle through ON, OFF, and AUTO modes. In AUTO mode, the timer follows its programmed schedule. In ON or OFF mode, the timer will remain in that state until manually changed or the next programmed event occurs (depending on model specifics).

7. Ngaprogram Timer

The CJ Tech 605 allows for multiple ON/OFF programs over a 7-day cycle. The exact number of programs may vary. Follow these general steps:

1. Pencét éta SET button repeatedly until "PROG" or "PROGRAM" appears on the display, along with a program number (e.g., "1 ON").
2. Ngagunakeun éta +/OTOMATIS or -/RDM buttons to select the desired day(s) for this program (e.g., MON-FRI, SAT-SUN, or individual days). Press SET pikeun mastikeun.
3. Set the desired ON time using the +/OTOMATIS or -/RDM buttons for hours and minutes. Press SET pikeun mastikeun.
4. The display will then show "1 OFF". Set the desired OFF time for the same program using the +/OTOMATIS or -/RDM kancing. Pencét SET pikeun mastikeun.
5. Repeat steps 2-4 for additional programs (e.g., "2 ON", "2 OFF", etc.).
6. Once all programs are set, press the ON/OFF button to return to normal operating mode. Ensure the timer is in "AUTO" mode for programs to execute.

7.1. Astronomical Feature (Dusk/Dawn)

If your model supports astronomical features, it will automatically adjust ON/OFF times based on local sunrise and sunset. This feature is typically enabled or configured within the programming mode. Consult the display for specific indicators (e.g., "DUSK", "DAWN") when setting programs. You may need to set your geographical region or zip code for accurate operation, though this model's interface suggests a simpler implementation.

8. Pangropéa

• beberesih: Disconnect the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
• Panyimpenan: If storing the timer for an extended period, ensure the internal battery is charged periodically to maintain its life. Store in a cool, dry place.

9. Cara ngungkulan

10. Spésifikasi

• model: CJ Tech 605
• Masukan Voltage: 120V AC, 60Hz
• Beban Max: (Typically 15A/1800W Resistive, 10A/1200W Tungsten - Refer to product label for precise ratings)
• Outlet: 2 outlet grounded
• Pemrograman: 7-Day Digital
• Batré internal: NiMH (for backup)
• Ukuran Paket: 6.7 x 5 x 2 inci
• Beurat barang: 4.8 ons
• ASIN: B01GVNSW90
• Item Model Number (Manufacturer SKU): 4330939843

Note: Electrical ratings are typical for this type of device. Always refer to the product label for precise specifications.

11. Garansi jeung Rojongan

CJ Tech products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official CJ Tech websitus. Mangga siapkeun nomer modél anjeun (605) sareng inpormasi pameseran nalika ngahubungi dukungan.