Turtle Beach Stealth 350VR Amplified Virtual Reality Gaming Headset Instruction Manual

1. Bubuka

The Turtle Beach Stealth 350VR gaming headset is engineered to deliver clear, amplified Virtual Reality audio. It features a battery-powered design, Variable Bass Boost, and an ergonomic structure specifically tailored for VR use, providing ample clearance for VR headbands and cables. Equipped with large 50mm speakers, it offers a rich and expansive audio experience. The lightweight build and comfortable fabric-wrapped memory foam ear cushions ensure extended comfort during use. A removable noise-cancelling microphone guarantees crystal-clear communication, complemented by Mic Monitoring, which allows users to hear their own voice to prevent shouting. Convenient on-board audio controls are easily accessible directly on the headset.

Gambar 1: Hareupeun view of the Turtle Beach Stealth 350VR Headset.

2. Setélan

2.1 Sambungan Mikropon

To connect the noise-cancelling microphone, firmly insert it into the dedicated jack located on the left ear cup of the headset. Ensure a solid connection for optimal chat clarity.

Figure 2: Close-up of the left ear cup showing the microphone jack.

2.2 Powering on / Pareum

Locate the power switch on the left ear cup. Slide the switch upwards to power on the headset. A blue LED indicator will illuminate, confirming the headset is active. To power off, slide the switch downwards.

2.3 Ngecas Headsét

The Stealth 350VR features an internal rechargeable battery, providing up to 30 hours of amplified VR audio. To charge, connect the included USB charging cable to the charging port on the headset and a compatible USB power source.

2.4 Connecting to a VR Device (e.g., PlayStation VR)

Ensure your VR device (e.g., PSVR) is fully set up and powered on. Connect the Stealth 350VR to the VR device using the included short audio cable. The right-angle connector side of the audio cable should be connected to the VR device's inline port. After connecting, power on your Stealth 350VR headset. Adjust the VR device's volume to maximum, then use the headset's controls for your preferred volume level.

For PlayStation 4 setup: Go to Setélan > Paranti > Alat Audio. Atur Input & Alat Kaluaran to the headset connected to the controller. Set Kaluaran ka Headphone ka Sadayana Audio. Atur Kontrol Volume (Headphone) to maximum. Select Saluyukeun Tingkat Mikropon and follow on-screen instructions to calibrate.

3. Ngoperasikeun Headsét

All primary audio controls are conveniently located on the left ear cup of the headset.

3.1 Mic Mute

To mute or unmute the microphone, slide the dedicated switch on the face of the left ear cup left or right.

3.2 Jilid Master

Adjust the master volume dial to control the overall audio output level of your Stealth 350VR headset.

3.3 Variable Bass Boost

Use the Variable Bass Boost slider to increase or decrease the bass levels, enhancing immersion in your VR experience.

4. Pangropéa

To ensure the longevity and optimal performance of your Turtle Beach Stealth 350VR headset, follow these maintenance guidelines:

• beberesih: Use a soft, dry cloth to wipe down the ear cups and headband. Avoid using harsh chemicals or abrasive materials.
• Panyimpenan: Simpen headset di tempat anu tiis sareng garing jauh tina sinar panonpoé langsung sareng suhu anu ekstrim.
• Perawatan kabel: Handle all cables with care. Avoid sharp bends or excessive pulling, which can damage internal wiring.
• Mikropon: When not in use, the detachable microphone can be removed and stored separately to prevent damage.

5. Cara ngungkulan

If you encounter issues with your Stealth 350VR headset, consider the following common solutions:

• Teu Aya Audio/Volume Leutik:
  • Pastikeun headset dihurungkeun tur dicas pinuh.
  • Pariksa sadaya sambungan kabel pikeun mastikeun aranjeunna aman.
  • Verify that the master volume dial on the headset is turned up.
  • Confirm that the audio output settings on your VR device or console are correctly configured (refer to Section 2.4 for PS4 settings).
• Mikropon Teu Gawé:
  • Ensure the microphone is firmly inserted into its jack.
  • Check that the mic mute switch on the headset is in the unmute position.
  • Verify microphone input settings on your VR device or console.
• Audio distort:
  • Lower the master volume on the headset or your connected device.
  • Adjust the Variable Bass Boost to see if it resolves the distortion.
  • Pastikeun teu aya alat audio séjén anu ngaganggu.

6. Spésifikasi

7. Garansi jeung Rojongan

For warranty information, technical support, and additional resources, please visit the official Turtle Beach websitus atanapi ngahubungan layanan palanggan maranéhna. Simpen bukti pameseran anjeun pikeun klaim garansi.

Dukungan Online: www.turtlebeach.com/support