Feit Electric BPMR16/GU10/800/LED

Feit Electric BPMR16/GU10/800/LED Dimmable Spot Light Bulb Instruction Manual

Model: BPMR16/GU10/800/LED

Bubuka

This manual provides essential information for the safe and efficient use of your Feit Electric BPMR16/GU10/800/LED Dimmable Spot Light Bulb. Please read these instructions carefully before installation and retain them for future reference. This LED bulb is designed to provide 790 lumens of warm white light (3000K) while consuming only 9 watts of power, serving as an energy-efficient replacement for 75-watt incandescent bulbs.

Émbaran Kasalametan

  • Résiko Setrum Listrik: Always disconnect power before installation, inspection, or removal.
  • Résiko seuneu: Ulah ngaleuwihan wat maksimumtage rating of the fixture. This bulb is rated for 9 watts.
  • Kasaluyuan: Cocog jeung damp lokasi. Henteu kanggo dianggo dina luminair anu ditutupan lengkep.
  • Dimming: This bulb is dimmable. Ensure your dimmer switch is compatible with LED technology for optimal performance.
  • Suhu operasi: Do not install where operating temperatures exceed the bulb's rated temperature.
  • pembuangan: Dispose of the bulb in accordance with local regulations. This product is mercury-free.

Setup sareng Instalasi

The Feit Electric BPMR16/GU10/800/LED bulb features a GU10 base, designed for easy installation in compatible fixtures such as track lighting or recessed cans.

  1. Pareuman Daya: Before attempting any installation, ensure the power to the fixture is turned off at the circuit breaker or fuse box.
  2. Leupaskeun bohlam heubeul: Allow the old bulb to cool completely before carefully removing it from the fixture. For GU10 bulbs, this typically involves pushing up and twisting counter-clockwise.
  3. Selapkeun Bohlam Anyar: Align the two pins of the new Feit Electric LED bulb with the two holes in the GU10 socket. Gently push the bulb into the socket and twist clockwise until it locks securely into place. Do not force the bulb.
  4. Mulangkeun Daya: Sakali bohlam parantos dipasang kalayan aman, balikkeun deui kakuatan ka lampuna.
  5. Tes: Hurungkeun saklar lampu pikeun mastikeun operasi anu leres.
Feit Electric BPMR16/GU10/800/LED Dimmable Spot Light Bulb packaging

Image: Packaging of the Feit Electric BPMR16/GU10/800/LED Dimmable Spot Light Bulb, showing product identification.

Feit Electric BPMR16/GU10/800/LED Dimmable Spot Light Bulb installed in a track light fixture

Image: The Feit Electric BPMR16/GU10/800/LED bulb installed in a track lighting fixture, demonstrating typical application.

Parentah Operasi

This LED bulb is designed for simple operation and offers dimming capabilities.

  • Operasi standar: Simply use your existing light switch to turn the bulb on or off. The bulb provides instant-on brightness.
  • Fungsi dimming: If connected to a compatible LED dimmer switch, you can adjust the light output from full brightness down to a lower level. Refer to your dimmer switch's instructions for specific operation.
Room illuminated with warm white light from Feit Electric LED bulbs, creating a cozy atmosphere

Image: A room illuminated with warm white light, demonstrating the cozy ambiance provided by the 3000K color temperature of the Feit Electric LED bulb.

Pangropéa

The Feit Electric LED bulb requires minimal maintenance due to its long lifespan and durable design.

  • beberesih: Pastikeun kakuatan pareum sareng bohlamna tiis sateuacan beberesih. Ngusap bohlam ku lawon lemes, garing. Ulah make cleaners cair atawa abrasive.
  • ngagantian: This LED bulb has an average life of 25,000 hours. Replacement is only necessary at the end of its operational life.

Pamérésan masalah

If you experience issues with your Feit Electric LED bulb, consider the following common solutions:

  • Bohlam teu hurung:
    • Ensure power to the fixture is on.
    • Check that the bulb is securely seated in the socket.
    • Pariksa yén circuit breaker teu tripped.
    • Nguji bohlam dina fixture gawé dipikawanoh.
  • Kedip-kedip atawa Peredupan anu teu Konsisten:
    • Ensure your dimmer switch is compatible with LED bulbs. Older incandescent-only dimmers may cause flickering.
    • Check for loose connections in the fixture or switch.
  • Ngurangan Caang:
    • Upami nganggo dimmer, pastikeun disetel ka kacaangan maksimum.
    • Verify the bulb is not in an enclosed fixture that could cause overheating and premature dimming.

spésifikasi

FiturSpésifikasi
Nomer modélBPMR16/GU10/800/LED
Tipe LampuLED
Ukuran Bentuk BohlamMR16
Dasar BulbGU10
Wattage9 Watt
Sarua Pijar75 Watt
Caang790 Lumén
Suhu Warna3000 Kelvin (Bodas Haneut)
Voltage120 volt
DimmableSumuhun
Jangka waktu hirup25,000 Jam
Sudut Beam40 darajat
CRI (Indéks Rendering Warna)80
Jero rohangan / pamakéan outdoorJero rohangan / Luar (Damp lokasi)
SertifikasiUL Didaptarkeun

Garansi sareng Rojongan

This Feit Electric BPMR16/GU10/800/LED Dimmable Spot Light Bulb is covered by a garansi 2 taun ti tanggal beuli. Garansi ieu nyertakeun cacad dina bahan sareng pagawean dina panggunaan normal.

For warranty claims, technical support, or further assistance, please contact Feit Electric customer service. Keep your proof of purchase for warranty validation.

Inpormasi kontak: Please refer to the Feit Electric official websitus atanapi kemasan produk kanggo inpormasi kontak dukungan palanggan anu pangénggalna.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.