Buku Panduan Pangguna Pangontrol Irigasi Jero Ruangan Hunter X-Core XC601i-e 6-Station

Bubuka

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Hunter X-Core XC601i-e 6-Station Indoor Irrigation Controller. Please read this manual thoroughly before installation and operation to ensure proper use and optimal performance of your irrigation system.

Produk Leuwihview

The Hunter X-Core XC601i-e is an indoor irrigation controller designed to manage up to 6 irrigation stations. It features three independent programs (A, B, C) with multiple start times, allowing for flexible scheduling of watering cycles. The intuitive dial and button interface simplify programming and manual operation.

Gambar 1: Front panel of the Hunter X-Core XC601i-e controller. It displays a digital screen at the top, control buttons (+, -, arrow keys, PRG) above the main dial, and a large central dial with various settings: System Off, Manual, Solar Sync, Seasonal Adjust, Date/Time, Start Times, Run Times, and Water Days. The Hunter logo is visible at the bottom.

Disetél

1. Pamasangan Controller

1. Choose a suitable indoor location near a standard electrical outlet, protected from direct sunlight and extreme temperatures.
2. Use the provided mounting template or mark the two mounting holes on the wall.
3. Install two screws into the wall, leaving approximately 3mm of the screw head exposed.
4. Hang the controller on the screws using the keyhole slots on the back.

2. Ngakabelkeun Kontroler

Pancegahan Kasalametan: Ensure the power supply is disconnected before performing any wiring.

• Sambungan Daya: Connect the two wires from the external transformer to the two terminals labeled "24 VAC" on the controller's terminal strip.
• Valve Wiring:
  1. Connect one wire from each solenoid valve to a separate station terminal (1-6).
  2. Connect the common wire from all solenoid valves to the terminal labeled "COM".
• Master Valve/Pump Start (Optional): If using a master valve or pump start relay, connect one wire to the terminal labeled "MV" and the other to the "COM" terminal.
• Sensor Wiring (Optional): If using a rain sensor or other weather sensor, connect the sensor wires to the two terminals labeled "SEN". Ensure the sensor bypass switch is set correctly.

3. Initial Power-Up and Basic Settings

1. Connect the transformer to a power outlet. The display should illuminate.
2. Setel Tanggal/Waktos:
   • Hurungkeun dial kana Kaping/Waktu posisi.
   • Ngagunakeun éta + or - buttons to adjust the year, month, day, and time.
   • Ngagunakeun éta > button to move between settings.

Parentah Operasi

The X-Core controller uses a central dial for navigation and dedicated buttons for adjustments.

Kontrol Dial Posisi:

• Sistem Pareum: Turns off all automatic and manual watering.
• Manual: Allows for manual operation of individual stations or programs.
• Kaping/Waktu: Used to set the current date and time.
• Mimitian Kali: Used to set the start times for programs A, B, and C.
• Waktu ngajalankeun: Used to set the watering duration for each station within programs A, B, and C.
• Dinten cai: Used to select specific watering days or intervals for programs A, B, and C.
• Saluyukeun musiman: Adjusts all program run times by a percentage (e.g., 100% for normal, 50% for half).
• Solar Sync: (If equipped and enabled) Automatically adjusts watering based on local weather conditions.

Programming Automatic Watering:

The X-Core has three independent programs: A, B, and C. Each program can have up to four start times.

1. Pilih Program: Pencét éta PRG button to cycle through programs A, B, and C.
2. Atur Waktos Mimitian:
   • Hurungkeun telepon kana Mimitian Times.
   • Paké + or - to set the desired start time.
   • Pencét PRG or > to move to the next start time (up to four per program).
3. Atur Waktos Lari:
   • Hurungkeun telepon kana Ngajalankeun Times.
   • The display will show the program and station number. Use + or - to set the watering duration (in minutes) for each station.
   • Paké > to advance to the next station.
4. Atur poé cai:
   • Hurungkeun telepon kana Cai Poé.
   • Select watering days (e.g., Monday, Wednesday, Friday) or an interval (e.g., every 2 days) using the + or - kancing.
   • The > button can be used to cycle through day options.
5. Return to RUN: After programming, turn the dial to the lumpat position for automatic operation.

Operasi manual:

1. Hurungkeun telepon kana Manual.
2. Ngagunakeun éta > button to select the desired station or program.
3. Paké + or - to set the manual run time.
4. The selected station or program will begin watering immediately.
5. Pikeun ngeureunkeun nyiram sacara manual, puterkeun tombol ka Sistem Pareum or lumpat.

Pangropéa

Ngagantian batré:

The X-Core controller uses one AAA battery to maintain the time and program settings during power outages. It is recommended to replace the battery annually.

1. Locate the battery compartment on the back or side of the controller.
2. Open the compartment and remove the old AAA battery.
3. Insert a new AAA battery, ensuring correct polarity.
4. Tutup kompartemen batré.

Note: The controller requires AC power for valve operation. The battery only preserves settings.

Perawatan Umum:

• Tetep controller beresih jeung bebas tina lebu. Anggo kaén anu lemes sareng garing pikeun beberesih.
• Ensure the controller is not exposed to moisture or extreme temperatures, as it is designed for indoor use.

Pamérésan masalah

spésifikasi

• model: XC601i-e
• Stasion: 6
• Program: 3 independent programs (A, B, C)
• Mimitian Kali: Up to 4 per program
• Input kakuatan: 230 VAC, 50/60 Hz (via external transformer)
• Kaluaran kakuatan: 24 VAC, 1.0 A
• Batré: 1 x AAA (for time and program backup)
• Ukuran (approx.): 25.5 x 18.5 x 8 cm (Package dimensions, actual unit may vary slightly)
• Beurat (approx.): 3 kg (Package weight, actual unit may vary slightly)
• Paké Indoor Ngan