AVANTEK Non-Contact Digital Laser IR Infrared Thermometer User Manual

Bubuka

The AVANTEK Non-Contact Digital Laser IR Infrared Thermometer is designed for safe and accurate surface temperature measurement. This device utilizes infrared radiation to measure temperatures from a distance, making it ideal for various applications including cooking, automotive diagnostics, and home maintenance. Its instant readout capability and wide temperature range ensure efficient and reliable performance.

Gambar 1: The AVANTEK Infrared Thermometer is versatile, suitable for measuring temperatures in automotive engines, fireplaces, refrigerators, and during grilling.

Émbaran Kasalametan

Please read and understand all safety instructions before using this product. Failure to follow these instructions may result in injury or damage to the device.

• Kasalametan laser: Do not look directly into the laser beam or point it at people or animals. The laser is used for targeting only and does not measure temperature.
• Non-Contact Use: This thermometer is designed for non-contact surface temperature measurement. Do not attempt to measure internal temperatures of objects or body temperature.
• Kasalametan listrik: Do not expose the device to water or extreme temperatures. Do not attempt to disassemble or modify the device.
• Kasalametan batré: Use only the specified 9V battery. Ensure correct polarity when installing. Remove the battery if the device will not be used for an extended period.
• Lingkungan Operasi: Use the thermometer in a clean, dry environment. Avoid areas with high humidity, dust, or corrosive gases.

Produk Leuwihview

Eusi pakét

Saatos ngabongkar bungkusan, pastikeun sadaya barang anu didaptarkeun di handap aya:

• AVANTEK Non-Contact Digital Laser IR Infrared Thermometer
• Batré 9V
• Manual pangguna (dokumén ieu)

Gambar 2: The product package includes the AVANTEK thermometer, a 9V battery, and the user manual.

Komponén Alat

Familiarize yourself with the main components of your thermometer:

Gambar 3: Key components of the thermometer, including the digital display, unit conversion button, backlight button, laser/IR switch, mode button, laser aperture, infrared lens, and trigger.

• Digital tampilan: Shows temperature readings and settings.
• °C/°F Conversion Key: Switches between Celsius and Fahrenheit units.
• LCD Backlight Key: Ngaganti lampu latar tampilan.
• Infrared/Laser Switch Key: Activates or deactivates the laser pointer.
• Tombol Pindah Modeu: Cycles through different measurement modes (if applicable).
• liang laser: Emits the laser for targeting.
• Lensa Infrabeureum: Detects infrared radiation for temperature measurement.
• Temperature Measurement Key (Trigger): Mimitian pangukuran suhu.

Fitur konci

• Rentang Ukur Lebar: Measures temperatures from -50°C to 550°C (-58°F to 1022°F).
• Waktos Tanggapan Gancang: Provides an immediate reading within 500 ms.
• Téknologi Non-Kontak: Safely measures surface temperatures without direct contact.
• Rasio Jarak ka Titik (D: S): 12:1, allowing accurate measurement from a distance.
• Fixed Emissivity: 0.95, suitable for most common surfaces.
• Layar LCD Backlit: Ensures clear readings in various lighting conditions.
• Konversi Unit: Gampang pindah antara Celsius sareng Fahrenheit.
• Otomatis Pareum: Automatically shuts off after 7 seconds of inactivity to conserve battery.

Disetél

Pamasangan batré

The thermometer requires one 9V battery (included). Follow these steps to install the battery:

1. Teangan tempat panutup kompartemen batré dina cecekelan tina térmométer.
2. Tarik handap panutup pikeun muka kompartemen.
3. Insert the 9V battery, ensuring the correct polarity (+ and - terminals match the markings inside the compartment).
4. Tutupkeun panutup kompartemen batré dugi ka ngaklik pageuh kana tempatna.

Gambar 4: Battery installation process for the AVANTEK thermometer.

Parentah Operasi

Nyokot Pangukuran

1. Point the infrared lens towards the surface of the object you wish to measure.
2. Press and hold the Temperature Measurement Key (trigger). The laser pointer will activate (if enabled) to help you target the desired spot.
3. The temperature reading will appear on the digital display within 500 milliseconds.
4. Release the trigger to hold the last measured temperature on the display. The device will automatically power off after 7 seconds of inactivity.

Gambar 5: Using the AVANTEK thermometer to take a non-contact temperature measurement.

Unit Suhu Ngalih (°C/°F)

Pikeun pindah antara Celsius sareng Fahrenheit:

• While the device is on, press the °C/°F Conversion Key (refer to Figure 3) to toggle between the two units.

Activating/Deactivating Backlight

To turn the LCD backlight on or off:

• While the device is on, press the LCD Backlight Key (tingali Gambar 3).

Laser Pointer Control

To activate or deactivate the laser pointer:

• While the device is on, press the Infrared/Laser Switch Key (tingali Gambar 3).

Rasio Jarak jeung Titik (D:S)

The thermometer has a D:S ratio of 12:1. This means that at a distance of 12 inches, the measurement spot diameter will be 1 inch. To ensure accurate readings, make sure the target area is larger than the spot size at your chosen measurement distance.

Gambar 6: The thermometer display and D:S ratio guide on the side of the device.

Pangropéa

• beberesih: Lap alat nepi ka bersih ku kaén nu lemes,amp cloth. Do not use abrasive cleaners or solvents. Ensure the infrared lens is kept clean and free from dust or debris for accurate readings.
• Panyimpenan: Store the thermometer in a cool, dry place, away from direct sunlight and extreme temperatures. Remove the battery if storing for extended periods to prevent leakage.
• Ngagantian batré: Ganti batré 9V nalika indikator batré lemah nembongan dina tampilan.

Pamérésan masalah

spésifikasi

Émbaran jaminan

This AVANTEK product is covered by a 12-month warranty from the date of purchase. In the unlikely event of a defect or malfunction during this period, AVANTEK will provide a replacement. Please retain your proof of purchase for warranty claims. This warranty does not cover damage caused by misuse, accident, unauthorized modification, or normal wear and tear.

Ngarojong

For any questions, technical assistance, or warranty claims, please contact AVANTEK customer support through the retailer's platform or the official AVANTEK website. Please have your model number (CECOMINOD046427) and purchase details ready when contacting support.