Buku Panduan Pangguna Pompa Cosmo CPE 6-25 Efisiensi Tinggi anu Diatur Sacara Éléktronik

1. Bubuka

This user manual provides essential information for the safe and efficient installation, operation, and maintenance of your Cosmo CPE 6-25 High-Efficiency Electronically Regulated Pump. Please read these instructions carefully before installation and retain this manual for future reference. This pump is designed for use in heating systems and similar applications requiring efficient fluid circulation.

2. Parentah Kasalametan

• Kasalametan listrik: Ensure the power supply is disconnected before any installation, maintenance, or repair work. All electrical connections must be performed by a qualified electrician in accordance with local regulations.
• Pamasangan: The pump must be installed by qualified personnel. Incorrect installation can lead to property damage or personal injury.
• Suhu operasi: Do not operate the pump outside the specified operating temperature range of -10 °C to +95 °C.
• Kasaluyuan cairan: Use only heating water compliant with VDI 2035 or a water/glycol mixture (max. 1:1). Other fluids may damage the pump or create hazardous conditions.
• Tekanan: Ensure the system pressure does not exceed the maximum operating pressure of PN 6.
• Perlindungan: The pump has a protection type of IP X2D. Protect it from direct water spray and excessive moisture.

3. Produk Langkungview

The Cosmo CPE 6-25 is a high-efficiency circulation pump featuring electronic power regulation for variable differential pressure. It incorporates an EC motor with automatic power regulation and three selectable speed levels. A thermal insulation shell is included to enhance energy efficiency. The integrated LED display allows for setting desired values and monitoring current power consumption in watts.

3.1 Komponén konci

• EC Motor: Electronically commutated motor for high efficiency and automatic power adjustment.
• Témbong LED: Shows operational status, set values, and power consumption.
• Control Button (MODE): Used to cycle through operating modes and adjust settings.
• Thermal Insulation Shell: Reduces heat loss from the pump body.
• Perumahan pompa: Made from grey cast iron.
• Impeller: Constructed from polypropylene with stainless steel components.

3.2 Gambar produk

Gambar 1: Hareupeun view of the Cosmo CPE 6-25 pump, showcasing its compact design and the integrated LED display panel. The display shows operational data such as flow rate (m³/h), head (m), and power consumption (W), along with a 'MODE' button for user interaction.

Gambar 2: Samping view of the Cosmo CPE 6-25 pump, illustrating the grey thermal insulation shell that covers the main body. This insulation helps to minimize heat loss, contributing to the pump's high efficiency. The pump's electrical connection point is visible at the bottom.

4. Setup jeung Instalasi

Installation of the Cosmo CPE 6-25 pump should only be carried out by a qualified professional to ensure correct functionality and safety. Refer to local plumbing and electrical codes.

4.1 Pamasangan

• The pump is designed for in-line pipe installation. Ensure the mounting position allows for easy access for maintenance and proper ventilation.
• The pump is equipped with RP 1" (DN 25) screw connections. Use appropriate sealing materials and tools to ensure a watertight connection.
• Ensure the pump is installed in a horizontal position with the motor shaft horizontal to prevent air pockets and ensure proper lubrication.

4.2 Sambungan Listrik

• The pump requires a 1 230 V / 50 Hz power supply.
• Connect the pump to a dedicated circuit protected by a residual current device (RCD) and appropriate circuit breaker.
• Follow the wiring diagram provided with the pump (if applicable) and ensure all connections are secure and insulated.

4.3 System Filling and Venting

• After installation, fill the heating system with the appropriate fluid (heating water compliant with VDI 2035 or water/glycol mixture, max. 1:1).
• Thoroughly vent the system to remove all air. Air in the system can cause noise, reduce performance, and damage the pump.

5. Parentah Operasi

The Cosmo CPE 6-25 pump features electronic control for optimized performance and energy efficiency.

5.1 Mimiti ngamimitian

• Pastikeun sistemna pinuh sareng aya ventilasina.
• Restore power to the pump. The LED display will illuminate.
• The pump will typically start in an automatic mode, adjusting its performance based on system requirements.

5.2 Modeu Operasi sareng Setélan

The pump offers electronic power regulation and three speed levels. Use the 'MODE' button on the front panel to cycle through available settings and operating modes. The LED display will show the selected mode, set value, and real-time power consumption (watts).

• Modeu otomatis: The pump automatically adjusts its speed and power to maintain a constant differential pressure or flow, optimizing energy consumption.
• Fixed Speed Modes (3 levels): Allows manual selection of three distinct speed settings for specific system requirements.
• Consult the detailed operating instructions provided with the physical product for specific button press sequences and display interpretations.

5.3 Ngawaskeun

The LED display provides real-time feedback on the pump's operation, including:

• Current power consumption in watts (W).
• Selected operating mode or set value (e.g., differential pressure, speed level).

6. Pangropéa

Regular maintenance ensures the longevity and efficient operation of your Cosmo CPE 6-25 pump. Always disconnect power before performing any maintenance.

• System Fluid Quality: Ensure the heating system fluid remains clean and free of debris. Poor fluid quality can lead to pump wear and reduced efficiency.
• Pariksa insulasi: Periodically inspect the thermal insulation shell for damage or degradation.
• Inspeksi bocor: Regularly check for any leaks around the pump connections. Tighten connections if necessary.
• Pamariksaan profésional: It is recommended to have the pump and heating system inspected by a qualified technician annually.

7. Cara ngungkulan

Bagian ieu nyayogikeun léngkah-léngkah ngungkulan masalah dasar pikeun masalah umum. Pikeun masalah anu rumit, hubungi teknisi layanan anu mumpuni.

• Pompa teu ngamimitian:
  • Pariksa naha catu daya parantos nyambung sareng aktip.
  • Pariksa yén circuit breaker teu tripped.
  • Ensure the pump is not air-locked. Vent the system if necessary.
• Reduced Flow/Performance:
  • Check for blockages in the system or pump impeller.
  • Pastikeun tekanan sistem cekap.
  • Verify the selected operating mode and settings on the LED display.
  • Check for air in the system.
• Noise anu teu biasa:
  • Air in the system is a common cause of noise; vent thoroughly.
  • Check for loose connections or mounting.
  • If the noise persists, it may indicate internal damage; contact a technician.
• LED Display Not Working:
  • Pariksa catu daya.
  • If power is present and the pump is running but the display is off, there might be an internal fault; contact service.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer. COSMO, the manufacturer, can provide further support and technical assistance. Always provide the model number (CPE 6-25) and any relevant serial numbers when seeking support.

Pabrikan: COSMO

Jumlah modél: CPE 6-25