1. Bubuka
The Hioki BT-3554 Handheld Battery Tester is a high-precision instrument designed for the diagnosis of lead-acid batteries. It provides quick and accurate measurements of internal resistance and voltage, essential for assessing battery health and predicting lifespan. This manual provides detailed instructions for the safe and effective operation, maintenance, and troubleshooting of your BT-3554 unit.
2. Émbaran Kasalametan
Please read and understand all safety precautions before operating the instrument. Failure to follow these instructions may result in injury or damage to the instrument.
- Always use the instrument within its specified measurement ranges.
- Do not attempt to measure batteries that are damaged, leaking, or show signs of overheating.
- Ensure test leads are securely connected before taking measurements.
- Avoid exposing the instrument to extreme temperatures, humidity, or direct sunlight.
- Do not disassemble or modify the instrument. Refer all servicing to qualified personnel.
- Wear appropriate personal protective equipment (PPE), such as safety glasses, when working with batteries.
3. Eusi Paket
Pastikeun yén sadaya item anu didaptarkeun di handap kalebet kana pakét anjeun:
- Hioki BT-3554 Battery Tester Main Unit
- L2020 Pin Type Lead (or equivalent test leads)
- Zero Adjustment Board
- Instruksi Manual
- AA Alkaline Batteries (LR6) x 8
- Tali
- USB Cable (for data transfer, if applicable model)
4. Produk Langkungview
The Hioki BT-3554 is a compact and robust battery tester. Below is an image of the device with its key components and controls highlighted.
Image: The Hioki BT-3554 Handheld Battery Tester. The device features a large digital display showing values like '3.100 mΩ' and '60.00 V', along with status indicators like 'COMP PASS'. Various buttons for operation, memory, range selection, and power are visible on the front panel. Test leads with red and black connectors are attached to the top of the unit.
Kadali sareng Pintonan
- Layar tampilan: Shows measurement values (resistance, voltage), battery status, memory number, and various indicators (e.g., Bluetooth, hold, comparison results).
- Power Button (Orange): Hurungkeun sareng mareuman unit.
- READ Button (Blue): Ngamimitian pangukuran.
- MEMO Button (Blue): Ngaksés fungsi mémori.
- CLEAR Button (Blue): Clears memory data.
- HOLD Button (Purple): Ngabekukeun bacaan tampilan ayeuna.
- OADJ Button: Performs zero adjustment for resistance measurements. Press and hold for 2 seconds to activate.
- Tombol RANGE: Cycles through measurement ranges for resistance (Ω) and voltage (V).
- Tombol Panah (Luhur, Handap, Kénca, Katuhu): Dianggo pikeun navigasi dina ménu sareng nyaluyukeun setélan.
- Tombol ENTER: Confirms selections or settings.
- COMP Button: Activates or deactivates the comparison function.
- Tombol TANGGAL: Sets or displays the current date.
- Indikator Bluetooth: Nembongkeun status sambungan Bluetooth.
5. Setélan
5.1 Masang Batré
- Pastikeun unit dipareuman.
- Teang kompartemen batré di tukangeun unit.
- Buka panutup batré.
- Insert eight AA alkaline batteries (LR6), observing correct polarity (+/-).
- Tutup panutup batre aman.
5.2 Nyambungkeun Test Leads
- Connect the red test lead plug to the red terminal on the tester.
- Connect the black test lead plug to the black terminal on the tester.
- Pastikeun sambunganna pageuh sareng aman.
5.3 Daya Awal Hurung
Press the orange power button to turn on the unit. The display will illuminate, and the unit will perform a self-test before entering measurement mode.
6. Parentah Operasi
6.1 Basic Measurement (Resistance and Voltage)
- Hurungkeun panguji.
- Perform a zero adjustment (see Section 6.2) for accurate resistance measurements.
- Connect the test leads to the battery terminals, ensuring correct polarity (red to positive, black to negative).
- Pencét éta BACA button. The internal resistance (mΩ) and voltage (V) will be displayed simultaneously.
- To change the measurement range, press the jajaran kancing.
6.2 Zero Adjustment (OADJ)
Zero adjustment is crucial for accurate internal resistance measurements.
- Connect the test leads to the provided zero adjustment board.
- Pencét jeung tahan tombol OADJ button for approximately 2 seconds until 'OADJ' appears on the display.
- The display will show '0.000 mΩ' upon successful adjustment.
6.3 Ngagunakeun Fungsi Mémori
The BT-3554 can store measurement data.
- Nyimpen Data: Saatos pangukuran, pencét tombol mémo button to save the current reading. The memory number will increment.
- Ngingetan Data: Dina modeu pangukuran, pencét tombol mémo button repeatedly to cycle through stored data. Use arrow keys to navigate if available.
- Clearing Data: Pencét éta JELAS button to delete stored data.
6.4 Comparison Function (COMP)
The comparison function allows you to set upper and lower limits for resistance and voltage to quickly assess battery health (PASS/FAIL).
- Pencét éta COMP button to enter comparison setting mode.
- Paké kenop panah jeung Asupkeun button to set the desired upper and lower limits for resistance and voltage.
- Once limits are set, press COMP deui pikeun ngaktipkeun pungsi.
- During measurement, the display will show 'PASS' or 'FAIL' based on the set criteria.
6.5 Konektipitas Bluetooth
The BT-3554 features Bluetooth SMART for data transfer to compatible devices (e.g., smartphones, tablets) running the dedicated Hioki application.
- Ensure Bluetooth is enabled on your receiving device.
- On the BT-3554, the Bluetooth indicator will show connection status.
- Refer to the Hioki application's instructions for pairing and data transfer procedures.
7. Pangropéa
7.1 beberesih
Wipe the instrument with a soft, dry cloth. For stubborn dirt, use a cloth lightly dampened with water and a mild detergent. Do not use abrasive cleaners or solvents.
7.2 Ngagantian batré
When the battery indicator on the display shows low power, replace all eight AA batteries promptly to ensure accurate measurements and prevent data loss.
7.3 Panyimpenan
When not in use for extended periods, remove the batteries from the unit to prevent leakage. Store the instrument in a cool, dry place away from direct sunlight and extreme temperatures.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Unit teu hurung. | Batré paéh atawa salah dipasang. | Ganti batré, mastikeun polaritasna bener. |
| Inaccurate resistance readings. | Zero adjustment not performed or incorrect. | Perform zero adjustment (OADJ) correctly before measurement. |
| Display shows 'OVER' or 'OL'. | Nilai pangukuran ngaleuwihan rentang anu dipilih. | Select a higher measurement range using the RANGE button. |
| Masalah sambungan Bluetooth. | Bluetooth not enabled on device, out of range, or app issue. | Ensure Bluetooth is on, move closer to device, restart app/tester. |
| Unit freezes or behaves erratically. | glitch software samentara. | Remove batteries for a few minutes, then reinsert and restart. |
9. Spésifikasi
| Spésifikasi | Nilai |
|---|---|
| merek | Hioki |
| Nomer modél | BT-3554 |
| Tipe Pangukuran | Voltmeter (Internal Resistance and Voltage) |
| Sumber Daya | Batré Powered |
| Item Beurat | 2 Pon (kira-kira 0.91 kg) |
| Peunteun Suhu luhur | 50 Derajat Celcius |
| Ukuran Paket | 11.45 x 10.9 x 5.6 inci |
| Tanggal Sadia munggaran | 4 Maret 2016 |
10. Garansi jeung Rojongan
The Hioki BT-3554 Battery Tester is covered by a manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product for specific terms and conditions, including warranty period and coverage details.
For technical support, service, or inquiries regarding your Hioki product, please contact Hioki customer service or an authorized service center. Contact information can typically be found on the Hioki official websitus atanapi dina dokuméntasi produk.
