Pakakas Kontrol Jarak Jauh Dooya pikeun Tirai Rol - Buku Panduan

1. Bubuka

This instruction manual provides detailed information for the Dooya Remote Control Kit, designed to convert wired roller blinds into wireless, remote-controlled systems. The kit includes a radio wall control and a wireless handheld remote control, offering convenient operation of your roller blinds.

Please read this manual thoroughly before installation and operation to ensure proper use and longevity of the product.

2. Komponén produk

The Dooya Remote Control Kit typically includes the following components:

• Radio Wall Control: A wall-mounted unit for direct control of roller blinds.
• Wireless Handheld Remote Control: A portable remote for centralized or individual control.

Gambar 2.1: Leuwihview of the Dooya Radio Wall Control and Handheld Remote Control. The wall control is a square unit with a circular button cluster, and the remote is a slender rectangular device with a digital display and multiple buttons.

Gambar 2.2: Detil view of the Dooya Radio Wall Control. It features a central circular control with up, down, and stop indicators, designed for flush mounting.

Gambar 2.3: Detil view of the Dooya Wireless Handheld Remote Control. This remote has a digital display showing "15", and multiple buttons for channel selection and blind movement (up, down, stop, left, right).

3. Setup jeung Instalasi

3.1. Battery Installation (Handheld Remote)

The handheld remote control requires a 12V27A battery (not included). Locate the battery compartment on the back of the remote, open it, insert the battery with the correct polarity, and close the compartment securely.

3.2. Wall Control Installation

The radio wall control is designed for easy installation into standard junction boxes. Ensure power is disconnected before beginning installation. Connect the wall control to your wired roller blind motor according to the wiring diagram provided with your specific roller blind system. The wall control features front-mounted controls for Up, Down, and Stop functions.

This kit facilitates the transformation of any wired roller blind into a wireless system, allowing control via the included remote devices.

4. Parentah Operasi

4.1. Using the Wall Control

• Tombol Up: Pencét pikeun ngangkat roller blind.
• Tombol Turun: Pencét pikeun nurunkeun roller blind.
• Tombol Eureun: Press to halt the roller blind at its current position.

Each receiver (wall control) has 20 different channels, allowing for the creation of multiple groups on one receiver.

4.2. Using the Handheld Remote Control

The included handheld remote control operates on a frequency of 433.92 MHz. It features a single channel that allows for the control of all paired roller blinds simultaneously. If you have a 5-channel remote (DC251, sold separately), you can compose up to 5 separate window groups as needed, offering flexible control over individual or grouped blinds.

• Pilihan Saluran: Use the channel buttons (if applicable, e.g., on 5-channel remote) to select the desired blind or group.
• Tombol Up: Raises the selected roller blind(s).
• Tombol Turun: Lowers the selected roller blind(s).
• Tombol Eureun: Stops the selected roller blind(s) at the current position.

5. Programming and Pairing

The programming and registration procedures for pairing the remote control with the wall control, and assigning channels, are designed to be straightforward. While specific detailed steps are typically provided in a separate guide (often in French, as noted in product information), the general process involves:

1. Ngasupkeun Mode Papasangan: This usually involves a specific button press sequence on the wall control or a brief power cycle.
2. Transmitting Pairing Signal: Pressing a designated button on the handheld remote to send a pairing signal.
3. Panempatan Saluran: For multi-channel remotes, assigning specific blinds or groups to individual channels.

Refer to the comprehensive programming guide that accompanies your product for precise instructions on channel assignment and pairing procedures.

6. Pangropéa

To ensure optimal performance and longevity of your Dooya Remote Control Kit, follow these maintenance guidelines:

• beberesih: Wipe the wall control and remote control with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
• Ngagantian batré: Replace the 12V27A battery in the handheld remote control when its performance degrades or it stops responding.
• Kaayaan Lingkungan: Keep the devices away from excessive moisture, direct sunlight, and extreme temperatures.

7. Cara ngungkulan

If you encounter issues with your Dooya Remote Control Kit, consider the following troubleshooting steps:

• Alat Teu Ngabales:
  • Check the battery in the handheld remote control and replace if necessary.
  • Ensure the wall control has power and is correctly wired.
  • Verify that the remote control is within range of the wall control.
• Operasi anu salah:
  • Confirm that the correct channel is selected on the handheld remote for the desired blind or group.
  • Re-check programming and pairing steps if blinds are not responding as expected.
• gangguan:
  • Radio frequency devices can be susceptible to interference. Try operating the remote from a different position.
  • Ensure no other devices operating on similar frequencies are causing disruption.

If problems persist, consult a qualified technician or contact Dooya customer support.

8. Spésifikasi