Manual Pangguna Sistem Kontrol Rana Rol Kabel/Nirkabel dooya

Bubuka

This manual provides detailed instructions for the installation, operation, and maintenance of your dooya Wired/Wireless Roller Shutter Control System. This system is designed to centralize and control multiple roller shutters, offering both wired and wireless control options for enhanced convenience and flexibility.

Produk Leuwihview

The dooya Roller Shutter Control System includes the following components:

• 5 x DC318 Radio Wall Receivers
• 1 x DC251 5-Channel Remote Control

Figure 1: Complete dooya Roller Shutter Control System components.

Komponén

DC318 Radio Wall Receiver

The DC318 is a wired wall-mounted receiver that converts your existing wired shutter controls into radio-controlled units. Each receiver supports up to 20 different channels, allowing for flexible grouping of shutters. It features integrated buttons for Up, Down, and Stop operations.

Figure 2: DC318 Radio Wall Receiver.

DC251 5-Channel Remote Control

The DC251 is a wireless remote control designed to operate the DC318 receivers. It features 5 distinct channels, enabling you to control individual shutters or pre-defined groups of shutters. The remote allows for easy selection and command of your roller shutters.

Figure 3: DC251 5-Channel Remote Control.

Disetél

1. Installation of DC318 Radio Wall Receivers

1. Pegatkeun daya: Before beginning any electrical work, ensure the main power supply to the roller shutter circuit is disconnected at the circuit breaker.
2. Wiring: Connect the DC318 receiver to your existing wired roller shutter motor and power supply according to the wiring diagram provided in the full product manual. The receiver is designed to fit into standard junction boxes.
3. Pamasangan: Securely mount the DC318 receiver within the junction box.
4. Sambungan deui kakuatan: Sakali sadaya sambungan aman tur diverifikasi, balikkeun kakuatan ka sirkuit.

2. Battery Installation for DC251 Remote Control

The DC251 remote control requires one 12V27A battery (not included).

1. Locate the battery compartment on the back of the DC251 remote control.
2. Buka panutup kompartemen.
3. Insert the 12V27A battery, ensuring correct polarity (+/-).
4. Tutup panutup kompartemen batré aman.

3. Programming and Pairing

The programming and pairing process links the DC251 remote control with the DC318 receivers. This allows the remote to send commands to your roller shutters. Detailed programming steps are crucial for proper functionality and are typically found in the comprehensive manual accompanying the product. Generally, the process involves:

• Entering a programming mode on the DC318 receiver (often by pressing a hidden button or specific sequence).
• Sending a pairing signal from the DC251 remote control on the desired channel.
• Confirming successful pairing (e.g., motor jog, LED indicator).
• Repeating for each DC318 receiver and desired channel/group configuration.

Each DC318 receiver can be assigned to one of 20 available channels, allowing for complex grouping scenarios. Refer to the full product manual for precise programming instructions for your specific setup.

Parentah Operasi

Using the DC318 Radio Wall Receiver Buttons

• Tombol Luhur (⌃): Press to raise the roller shutter.
• Tombol Ka Handap (⌄): Press to lower the roller shutter.
• Stop Button (—): Press to stop the roller shutter at its current position.

Using the DC251 5-Channel Remote Control

1. Pilihan Saluran: Use the channel selection buttons (usually indicated by arrows or numbers) to choose the desired channel (1-5). Each channel can control an individual shutter or a pre-programmed group of shutters.
2. Tombol Luhur (⌃): Press to raise the roller shutter(s) assigned to the selected channel.
3. Tombol Ka Handap (⌄): Press to lower the roller shutter(s) assigned to the selected channel.
4. Stop Button (—): Press to stop the roller shutter(s) at their current position.

The remote control allows for flexible management of your roller shutters, enabling you to operate them individually or in groups as configured during the programming phase.

Pangropéa

• Battery Replacement (DC251 Remote): When the remote control's range decreases or it becomes unresponsive, replace the 12V27A battery. Follow the battery installation steps in the "Setup" section.
• beberesih: Clean the surfaces of the wall receivers and remote control with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Kaayaan Lingkungan: Ensure the devices are not exposed to extreme temperatures, direct sunlight for prolonged periods, or excessive moisture.

Pamérésan masalah

spésifikasi

Garansi sareng Rojongan

Information regarding product warranty and dedicated customer support is not available in this document. Please refer to the original product packaging, the comprehensive manual included with your purchase, or the official dooya website for detailed warranty terms and contact information for technical support.