Buku Panduan Pangguna Pemanas Cai Instan CLAGE CEX9

1. Produk Langkungview

The CLAGE CEX9 is an electronically controlled instant water heater designed for efficient and continuous hot water supply. Its compact design and advanced features ensure energy savings by heating water only when needed, eliminating heat loss associated with storage tanks. This model is compatible with solar pre-heated water systems, provided the input temperature does not exceed 70°C.

The unit offers flexible power settings of 6.6 kW or 8.8 kW to suit various household needs and is designed for wall-mounted installation with water connections at the bottom.

2. Parentah Kasalametan

Please read all safety instructions carefully before installation and operation to prevent injury or damage to the appliance.

• Pamasangan profésional: Installation and electrical connections must be performed by a qualified and licensed professional in accordance with all local and national electrical and plumbing codes.
• Syarat listrik: For optimal performance and safety, especially when operating at 8.8 kW, the unit requires a dedicated electrical circuit with a 40 Ampere (A) circuit breaker and 6 mm² (AWG 10) electrical wiring. Using inadequate wiring or circuit protection can lead to overheating and fire hazards.
• Tekanan cai: Ensure the water pressure is within the specified operating range (up to 10 bar).
• Wates Suhu: Do not exceed the maximum permissible inlet water temperature of 70°C, particularly when connected to solar heating systems.
• Inspeksi Karusakan: Before installation, inspect the unit for any signs of damage. Do not install or operate a damaged appliance.
• Grounding: Pastikeun alat dibumikeun leres pikeun nyegah shock listrik.
• Barudak sareng Pengawasan: Alat ieu tiasa dianggo ku murangkalih umur 8 taun ka luhur sareng jalma anu kakurangan kamampuan fisik, indrawi atanapi mental atanapi kurang pangalaman sareng pangaweruh upami aranjeunna dipasihan pangawasan atanapi petunjuk ngeunaan panggunaan alat dina cara anu aman sareng ngartos bahaya anu aya. . Barudak teu kedah maén sareng alat. Beberesih sareng pangropéa pangguna henteu kedah dilakukeun ku murangkalih tanpa pangawasan.

3. Setup jeung Instalasi

The CLAGE CEX9 is designed for wall-mounted installation. Due to its electrical requirements and plumbing connections, professional installation is highly recommended.

3.1. Dimensi jeung Beurat

• Jangkungna: 294 mm
• lebar: 177 mm
• Length (Depth): 108 mm
• beurat: 2.9 kg

3.2. Sambungan Cai

The unit features bottom water connections with a diameter of 15x21 mm. Ensure all connections are watertight and comply with local plumbing codes.

3.3. Pamasangan

Mount the unit securely to a solid wall surface capable of supporting its weight when filled with water. Refer to the detailed installation diagram provided in the separate installation guide for precise mounting hole locations.

Gambar 1: Hareupeun view of the CLAGE CEX9 Instant Water Heater. The unit is white with a central grey control panel featuring a digital display showing "ECO" and "45.5" degrees Celsius, along with up/down arrows and numbered buttons (1 and 2) for operation. "MADE IN GERMANY" is visible above the display.

4. Parentah Operasi

The CLAGE CEX9 features an intuitive electronic control panel for easy operation.

4.1. Daya Hurung / Pareum

The unit powers on automatically when water flow is detected and powers off when water flow stops. Ensure the main electrical supply to the unit is switched on at the circuit breaker.

4.2. Setélan Suhu

Ngagunakeun éta Up (⌃) jeung Turun (⌄) arrow buttons on the control panel to adjust the desired hot water temperature. The current temperature setting will be displayed on the digital screen (e.g., 45.5°C).

4.3. Power Mode Selection (6.6 kW / 8.8 kW)

The unit can operate at two power levels: 6.6 kW and 8.8 kW. The higher power setting (8.8 kW) provides a greater flow rate of hot water, suitable for showers or multiple outlets, but requires a robust electrical installation (40A circuit breaker, 6mm² wiring).

• Pencét tombol 1 to select the 6.6 kW power mode. This mode is generally sufficient for single-point-of-use applications like a sink.
• Pencét tombol 2 to select the 8.8 kW power mode. This mode is recommended for higher demand applications such as showers or baths.

4.4. Modeu ECO

The "ECO" indicator on the display signifies that the unit is operating in an energy-efficient mode, optimizing power consumption based on the set temperature and water flow.

5. Pangropéa

Regular maintenance ensures the longevity and efficient operation of your CLAGE CEX9 water heater.

• beberesih: Ngabersihan bagian luar unit kalayan lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Sambungan cai: Periodically check water connections for any signs of leaks. Tighten connections if necessary.
• Turun: In areas with hard water, limescale buildup can affect performance. Consult a qualified plumber for professional descaling if you notice a decrease in hot water flow or temperature.
• Winterization: If the unit is in an unheated area and there is a risk of freezing, ensure the unit and pipes are drained to prevent damage.

6. Cara ngungkulan

If you experience issues with your CLAGE CEX9, refer to the following common troubleshooting steps. For complex problems, contact a qualified technician.

7. Spésifikasi

8. Garansi jeung Rojongan

For warranty information, please refer to the documentation provided with your purchase or contact the retailer. Information regarding the availability of spare parts for this model is currently unavailable.

For technical support or service inquiries, please contact CLAGE customer service or your authorized dealer.