Bubuka
Hatur nuhun pikeun meuliasing the KORG STB1-BK Digital Piano Stand. This stand is specifically designed to complement your KORG B1 or B2+ Digital Piano, providing a stable and aesthetically pleasing support structure. It elevates your digital piano to a standard playing height, enhancing your musical experience. This manual provides essential information for safe assembly, proper use, and maintenance of your stand.
Émbaran Kasalametan
- Baca sagala parentah taliti saméméh assembly sarta pamakéan.
- Pastikeun yén sadaya komponén aya sareng henteu ruksak sateuacan ngamimitian ngarakit.
- Pasang nangtung dina permukaan anu lemes sareng bersih pikeun nyegah goresan.
- Anggo ngan ukur perangkat keras anu disayogikeun pikeun perakitan.
- Ulah overighten screws, sabab ieu bisa ngaruksak bahan.
- Ensure the stand is placed on a level, stable surface before placing the digital piano on it.
- Do not allow children to climb on or play with the stand.
- Pariksa sadaya pengikat sacara berkala pikeun mastikeun éta tetep pageuh.
Eusi pakét
Punten parios yén sadaya komponén ieu kalebet dina pakét anjeun:
- Left Leg Panel (1)
- Right Leg Panel (1)
- Rear Cross Panel (1)
- Mounting Screws (Quantity as specified in hardware pack)
- Assembly Instructions (This document)
Note: A cross-point (Phillips head) screwdriver is required for assembly and is not included.
Setup sareng Majelis
Follow these steps to assemble your KORG STB1-BK Digital Piano Stand. It is recommended to have a second person assist during the final placement of the digital piano.
- Ngabongkar komponén: Carefully remove all parts from the packaging and lay them out on a soft, clean surface to prevent damage. Identify the Left Leg Panel, Right Leg Panel, and Rear Cross Panel.
- Attach Rear Cross Panel to Leg Panels: Align the pre-drilled holes on the ends of the Rear Cross Panel with the corresponding holes on the inner sides of the Left and Right Leg Panels. Use the provided mounting screws and a cross-point screwdriver to securely fasten the panels together. Ensure the stand forms a stable, rectangular structure. Do not overtighten.

Image: Illustration of the stand's components being assembled. The leg panels are connected by the rear cross panel, forming the base structure.
- Posisi Stand: Once assembled, carefully lift the stand and place it in your desired location. Ensure the floor surface is level and stable to prevent wobbling.
- Place the Digital Piano: With assistance, carefully lift your KORG B1 or B2+ Digital Piano and align it with the top edges of the assembled stand. Gently lower the piano onto the stand, ensuring it sits securely and evenly. The stand is designed to cradle the piano, providing a snug fit.

Image: The KORG STB1-BK stand fully assembled with a KORG digital piano placed on it, ready for use.
Parentah Operasi
The KORG STB1-BK stand is designed for passive support of your digital piano. Once assembled and the piano is placed, no further operational steps are required for the stand itself.
- Ensure the digital piano is centered and stable on the stand before use.
- Avoid leaning heavily on the stand or applying excessive force, as this may compromise stability.
- If moving the piano and stand, always lift both components carefully, preferably with assistance, to prevent damage or injury.
Pangropéa
To ensure the longevity and appearance of your KORG STB1-BK Digital Piano Stand, follow these simple maintenance guidelines:
- beberesih: Wipe the stand regularly with a soft, dry cloth to remove dust. For stubborn marks, a slightly damp lawon anu dieusi sabun hampang tiasa dianggo, teras dikeringkeun tuntas. Hindarkeun pembersih atanapi pelarut anu abrasif.
- Pariksa Fastener: Periodically (e.g., every 6 months) check all assembly screws to ensure they are still tight. Retighten if necessary, but do not overtighten.
- Kaayaan Lingkungan: Avoid placing the stand in direct sunlight or near heat sources, as this can cause material degradation or discoloration. Maintain a stable room temperature and humidity.
Pamérésan masalah
If you encounter any issues with your KORG STB1-BK Digital Piano Stand, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Nangtung oyag saatos dirakit. |
|
|
| Screw does not go all the way in. |
|
|
| Digital piano does not sit securely on the stand. |
|
|
spésifikasi
- model: STB1-BK
- warna: Hideung
- Bahan: Kai
- Ukuran produk (L x W x H): 51.65 x 13.23 x 24.92 inci (131.2 x 33.6 x 63.3 cm)
- Beurat barang: 18.48 pon (8.4 kg)
- Majelis Diperlukeun: Sumuhun
- Model anu cocog: KORG B1, KORG B2+ Digital Pianos
Garansi sareng Rojongan
For warranty information and customer support, please refer to the warranty card included with your product or visit the official KORG website. If you require assistance with assembly, troubleshooting, or have questions about your STB1-BK Digital Piano Stand, please contact KORG customer service.
KORG Official Websitus: www.korg.com





