Intermatic ST01 24-Hour In-Wall Timer Instruction Manual

1. Bubuka

This manual provides detailed instructions for the installation, setup, operation, and maintenance of the Intermatic ST01 24-Hour In-Wall Timer. The ST01 is a heavy-duty digital timer designed for in-wall flush mounting, suitable for controlling various electrical loads including incandescent and fluorescent lighting. Please read this manual thoroughly before installation and use to ensure safe and proper operation.

Gambar 1: Hareupeun view of the Intermatic ST01 24-Hour In-Wall Timer. This image displays the timer's digital LCD screen and control buttons, designed for flush mounting within a standard wall box.

2. Émbaran Kasalametan

WARNING: Risk of Electric Shock. Installation requires working with high voltage wiring. Always turn off power at the circuit breaker or fuse box before installation or servicing. Installation should be performed by a qualified electrician or trained personnel.

• Ulah dipasang nganggo leungeun baseuh.
• Do not use in locations where it may be exposed to water or extreme humidity.
• Pastikeun sadaya sambungan kabel aman sareng sasuai sareng kode listrik lokal.
• This device is rated for 120-277V, 15A, 1800W. Do not exceed these ratings.
• Pikeun pamakéan indoor wungkul.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• Intermatic ST01 24-Hour In-Wall Timer (1 unit)
• Sekrup Pemasangan (2 unit)
• Wire Nuts (3 units)
• Pitunjuk Pitunjuk (Dokumén ieu)

4. Pamasangan

Turutan léngkah ieu pikeun instalasi anu aman sareng leres:

1. Pareuman Daya: Locate the circuit breaker or fuse that supplies power to the switch box where the timer will be installed. Turn off the power completely. Verify power is off using a voltage panguji.
2. Hapus saklar anu aya: Carefully remove the wall plate and unscrew the existing switch from the wall box. Disconnect the wires from the old switch, noting which wire was connected to which terminal (typically Line, Load, and Ground).
3. Pasangkeun Timer: The ST01 timer typically has three wires:
   • Black (Line): Sambungkeun kana kabel panas anu asup tina pemutus sirkuit.
   • Red (Load): Connect to the wire going to the light fixture or appliance.
   • Héjo (Tanah): Connect to the bare copper or green ground wire in the wall box.
   Use wire nuts to secure all connections. Ensure connections are tight and no bare wire is exposed.
4. Pasang Timer: Gently fold the wires into the wall box. Insert the timer into the wall box and secure it with the provided mounting screws.
5. Pasang Plat Tembok: Attach a standard wall plate (not included) over the timer.
6. Mulangkeun Daya: Hurungkeun kakuatan deui dina circuit breaker atawa kotak sekering.

Note: The ST01 is designed for flush mounting and requires a standard electrical wall box.

5. Setup awal jeung Programming

Saatos dihurungkeun heula atanapi saatos dipareumantage, the timer's internal CR2 lithium battery maintains settings, but you may need to set the current time and program schedules.

1. Setel Waktos Ayeuna:
   • Pencét éta JAM kancing.
   • Ngagunakeun éta JAM jeung MENIT buttons to adjust the current time. The display operates in a 12-hour format (AM/PM).
   • Pencét JAM deui pikeun ngahémat sareng kaluar.
2. Program ON/OFF Schedules: The ST01 allows for multiple ON/OFF programs over a 24-hour period.
   • Pencét éta PROG button. The display will show "1 ON".
   • Paké JAM jeung MENIT buttons to set the desired ON time for program 1.
   • Pencét PROG deui. Layarna bakal némbongkeun "1 OFF".
   • Paké JAM jeung MENIT buttons to set the desired OFF time for program 1.
   • Repeat for additional programs (e.g., "2 ON", "2 OFF", etc.) as needed.
   • Pencét JAM to save all programs and return to normal operation.

Refer to the timer's LCD display for visual cues during programming.

6. Ngoperasikeun Timer

Once programmed, the ST01 timer will automatically switch connected devices ON and OFF according to your set schedules. You can also manually override the timer:

• Manual ON/OFF: Pencét éta MANUAL button to cycle through ON, OFF, and AUTO modes.
  • ON: The connected device will remain ON, overriding all programs.
  • Pareuman: The connected device will remain OFF, overriding all programs.
  • Otomatis: The timer will operate according to the programmed schedules. This is the default operating mode.
• Random Mode (if available): Some models may include a random mode for security. Consult the specific model's features if this is desired.

7. Pangropéa

The Intermatic ST01 timer requires minimal maintenance:

• beberesih: Wipe the timer's surface with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Batré: The internal CR2 lithium battery maintains time and program settings during power outages. This battery is typically long-lasting and not user-replaceable. If the display becomes dim or settings are lost frequently, professional servicing may be required.
• Pamariksaan: Periodically inspect the timer and wall plate for any signs of damage or loose connections.

8. Cara ngungkulan

9. Spésifikasi

• model: ST01
• Tipe: 24-Hour In-Wall Digital Timer
• Voltage: 120 - 277 V
• Amperage: 15 A
• kakuatan: 1800 W
• Kutub: 1
• Operasi: ON/OFF, Digital, LCD Display
• Setélan waktos: format 12-jam
• Batré: CR2 Lithium (for memory backup)
• Suhu operasi: 32°F nepi ka 104°F (0°C nepi ka 40°C)
• Pamasangan: Ningkatkeun siram
• Dimensi (sakabehna): 2.75" H x 1.75" W x 1.46" D (70mm H x 44mm W x 37mm D)
• warna: Bodas
• Bahan: logam
• Sertifikasi: Certified CSA
• Kasaluyuan: Incandescent, Fluorescent lighting
• Beurat barang: 8 ons (kira-kira 227 gram)

10. Garansi jeung Rojongan

For warranty information and technical support, please contact Intermatic customer service. Keep your purchase receipt as proof of purchase.

Layanan Palanggan Intermatic:

• Websitus: www.intermatic.com
• Refer to the official Intermatic websitus pikeun inpormasi kontak sareng detil jaminan anu paling ayeuna.