Soundbot SB210 HD Stereo Bluetooth Beanie User Manual

Bubuka

Hatur nuhun pikeun meuliasing the Soundbot SB210 HD Stereo Bluetooth Beanie. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of the product.

Émbaran Kasalametan

• Ulah ngalaan alat ka suhu ekstrim atawa kalembaban.
• Keep the device away from water and liquids, except when the electronic components are removed for washing.
• Ulah nyobian ngabongkar atawa ngaropéa alat. Ieu bakal ngabatalkeun jaminan.
• Anggo ukur kabel ngecas anu disayogikeun atanapi anu sarimbag anu disertipikasi.
• Hindarkeun dengekeun dina volume anu luhur pikeun période anu panjang pikeun nyegah karusakan dédéngéan.

Eusi pakét

• Soundbot SB210 HD Stereo Bluetooth Beanie
• Micro USB Ngecas Cable
• Manual pamaké

Produk Leuwihview

The Soundbot SB210 integrates Bluetooth audio technology into a comfortable beanie, allowing for wireless music playback and hands-free calling.

Image: The Soundbot SB210 Beanie featuring its integrated control panel on the side.

Fungsi Panel Control

• Tombol Puter/Reureuh: Power on/off, play/pause music, answer/end calls.
• Tombol Volume Up (+): Increase volume (short press), next track (long press).
• Tombol Volume Turun (-): Decrease volume (short press), previous track (long press).
• Mikropon: Pikeun nelepon handsfree.
• Port USB Mikro: Pikeun ngecas batré internal.

Disetél

1. Charging the Beanie

Before initial use, fully charge the beanie. Locate the Micro USB charging port on the control panel. Connect the provided Micro USB cable to the port and the other end to a USB power source (e.g., wall adapter, computer USB port). The LED indicator will show charging status. A full charge typically takes approximately one hour and provides a full day of playback.

Image: The Micro USB charging port integrated into the beanie's control panel.

2. Nyapasangkeun sareng Alat Bluetooth

1. Ensure the beanie is charged and turned off.
2. Press and hold the Play/Pause button on the control panel until the LED indicator flashes red and blue alternately. This indicates the beanie is in pairing mode.
3. Dina alat anjeun anu nganggo Bluetooth (smartphone, tablet, jsb.), buka setélan Bluetooth teras aktipkeun Bluetooth.
4. Milarian pikeun available devices. You should see "SB210" or "Soundbot Beanie" in the list.
5. Select "SB210" to connect. Once successfully paired, the LED indicator will typically show a solid blue light or flash blue slowly.

3. Wearing the Beanie

Place the beanie on your head, ensuring the integrated speakers are positioned comfortably over your ears. The beanie is designed to stay securely in place during various activities.

Parentah Operasi

1. Daya Hurung / Pareum

• Daya Hurung: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator lights up.
• Pareum listrik: Press and hold the Play/Pause button for approximately 3 seconds until the LED indicator turns off.

2. Puterkeun Musik

• Puter / Reureuh: Pencét pondok tombol Play / Reureuh.
• Lagu salajengna: Pencét lila tombol Volume Naék (+).
• Lagu Sateuacanna: Pencét lila tombol Volume Turun (-).

3. Volume Control

• Ningkatkeun Jilid: Pencét pondok tombol Volume Up (+).
• Turunkeun Jilid: Pencét pondok tombol Volume Turun (-).

4. Nelepon Hands-Free

The integrated microphone allows for hands-free communication when paired with your smartphone.

• Ngajawab / mungkas Telepon: Pencét pondok tombol Play / Reureuh.
• Nolak Telepon: Pencét lila tombol Puter/Pause.
• Telepon deui Nomer Panungtungan: Pencét dua kali tombol Play/Reureuh.

Pangropéa

1. Washing Instructions

The beanie is washable, but the electronic components must be removed first.

1. Locate the zipper on the inside lining of the beanie.
2. Unzip the lining and gently pull out the internal speakers and control module, which are typically held in place by Velcro. Be careful not to pull too hard on the connecting wires.
3. Once the electronic components are removed, the beanie can be machine washed according to the fabric care instructions (100% Acrylic, Machine Wash).
4. Allow the beanie to dry completely before reinserting the electronic components.
5. Carefully reinsert the speakers and control module, ensuring they are properly positioned over the ears, and secure them with the Velcro. Zip up the lining.

Image: The internal speaker component that needs to be removed before washing.

2. Panyimpenan

Store the beanie in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

Pamérésan masalah

• Alat moal hurung: Ensure the beanie is fully charged. Connect it to a power source using the Micro USB cable.
• Teu tiasa dipasangkeun sareng alat Bluetooth:
  • Ensure the beanie is in pairing mode (LED flashing red and blue).
  • Make sure Bluetooth is enabled on your device and it is within range (up to 33 feet).
  • Try turning off and on both the beanie and your Bluetooth device.
  • Clear previous Bluetooth connections on your device and attempt to pair again.
• Henteu aya sora atanapi volume rendah:
  • Check the volume levels on both the beanie and your connected device.
  • Ensure the beanie is properly paired and connected.
  • Verify that the speakers are correctly positioned over your ears.
• Blue LED flashes during use: This is normal behavior indicating the Bluetooth connection is active.

spésifikasi

Garansi sareng Rojongan

Soundbot products are designed and manufactured to the highest quality standards. For specific warranty details and support, please refer to the warranty card included with your purchase or visit the official Soundbot websitus.

Resmi Websitus: www.SoundBot.com