1. Bubuka
This manual provides essential information for the safe and effective operation of your AW 30W 252-LED RGB DMX Wall Washer Light Bar. This lighting fixture is designed to produce mixed colors and various lighting effects, suitable for enhancing ambiance in diverse settings such as parties, gatherings, stages, churches, clubs, and garages.
Mangga baca manual ieu tuntas saméméh instalasi tur pamakéan, sarta tetep eta pikeun rujukan ka hareup.
2. Émbaran Kasalametan
- Pastikeun catu daya voltage matches the product's requirements (AC85-265V, 50-60Hz).
- Do not expose the device to rain or moisture to prevent electric shock or fire hazards.
- Hindarkeun paparan panon langsung kana sumber cahaya, sabab tiasa nyababkeun karusakan panon.
- Salawasna pegatkeun listrik sateuacan beberesih atanapi ngalaksanakeun pangropéa naon waé.
- Pastikeun ventilasi anu pas di sabudeureun unit pikeun nyegah overheating.
- Entong nyobian ngalereskeun atanapi ngarobih unit nyalira. Rujuk sadayana jasa ka tanaga anu mumpuni.
- Jauhkeun unitna tina bahan kaduruk.
3. Eusi Paket
Pastikeun yén sadaya komponén aya nalika ngabongkar:
- AW 30W 252-LED RGB DMX Wall Washer Light Bar
- Kadali jauh
- Power Cord (approximately 3.5 ft long)
- Braket Pemasangan (2 pcs)
- Set of Screws for installation
Image: The AW LED Wall Washer Light Bar, its remote control, and the power cord.
4. Produk Langkungview
The AW 30W 252-LED RGB DMX Wall Washer Light Bar features a robust design and versatile lighting capabilities.
Fitur konci:
- Powerful & Even Lighting: Equipped with 252 LED light beads, producing a total brightness of 2000 Lumens with a 25-degree beam angle for concentrated and far-reaching illumination. Includes a memory function to retain the last setting.
- Kontrol anu gampang: Operates via an included remote control with a sensing distance of up to 49 feet. Supports Auto, DMX, Slave, Flash, and Sound/Music modes.
- Konstruksi awét: Features a sturdy die-cast aluminum housing for rust resistance and efficient heat dissipation, ensuring a long lifespan of approximately 80,000 hours for the LED beads.
- Pamasangan Gampang: Comes with two mounting brackets offering 360-degree angle adjustment for flexible installation on walls, ground, or ceilings.
komponén:
Gambar: Detil view of the control panel with LED display, DMX input/output, and power connections.
- Témbong LED: Shows current mode and settings.
- Tombol kontrol: UP, DOWN, INC (Increase), DEC (Decrease) for menu navigation and setting adjustments.
- Input/Kaluaran DMX: 3-pin XLR connectors for DMX512 control.
- Input/Kaluaran Daya: AC power connection and pass-through for linking multiple units.
- Pamasangan kurung: Adjustable brackets for secure positioning.
Image: Close-up of the 252 LED light beads.
5. Setélan
5.1 Pamasangan
The light bar can be installed on a wall, ground, or ceiling using the provided mounting brackets.
- Attach the two mounting brackets to the light bar using the included screws.
- Position the light bar in the desired location.
- Securely fasten the brackets to the mounting surface (wall, ground, or ceiling) using appropriate screws and anchors (if necessary).
- Adjust the angle of the light bar using the 360-degree adjustable brackets to achieve the desired lighting direction.
Image: Illustration of flexible mounting options and 360-degree bracket adjustment.
5.2 Sambungan Daya
Connect the provided power cord to the power input port on the light bar and then to a suitable power outlet (AC85-265V, 50-60Hz).
For linking multiple units, connect the power output of one unit to the power input of the next unit.
6. Parentah Operasi
The light bar can be controlled via the onboard display and buttons, or using the included remote control, or an external DMX controller.
6.1 Operasi kadali jauh
The remote control allows for convenient adjustment of colors and lighting modes from a distance of up to 49 feet.
Image: Layout of the remote control with labeled buttons.
- Tombol Daya: Hurungkeun unit HIRUP / OFF.
- Tombol Musik: Activates Sound/Music mode, where lighting effects change with sensed music.
- Tombol Pangaruh: Cycles through various pre-programmed lighting effects.
- DMX Button: Switches to DMX control mode.
- Slave Button: Sets the unit as a slave in a master/slave setup.
- Tombol Flash: Activates strobe/flash effects.
- R, G, B Buttons: Langsung milih warna Beureum, Héjo, atanapi Biru.
- Panah luhur/handap: Adjusts parameters (e.g., brightness, speed) or navigates menus.
- Tombol Numerik (0-9): May be used for specific program selection or DMX address setting.
6.2 Modeu operasi
- Modeu Otomatis: The light bar cycles through pre-programmed effects automatically.
- Sound/Music Mode: The light bar reacts to sound or music, changing effects dynamically.
- Modeu DMX: Allows control of the light bar using an external DMX512 controller. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX guide) for specific channel assignments.
- Mode Master/Budak: Link multiple units where one unit (master) controls the others (slaves) to synchronize lighting effects.
- Modeu kilat: Produces strobe or flashing light effects.
6.3 Fungsi Mémori
The light bar is equipped with a memory function that retains your last selected setting, providing convenience for consistent use.
Gambar: Examples of various color light effects produced by the wall washer light bar.
7. Pangropéa
7.1 beberesih
- Before cleaning, ensure the unit is unplugged from the power source.
- Use a soft, dry cloth to wipe the exterior of the light bar.
- Ulah nganggo pembersih abrasif, pangleyur, atanapi bahan kimia anu keras, sabab ieu tiasa ngaruksak lapisan atanapi komponén internal.
- Periodically clean the lens to ensure optimal light output.
7.2 Panyimpenan
When not in use for extended periods, store the light bar in a cool, dry place, away from direct sunlight and extreme temperatures. It is recommended to store it in its original packaging or a protective case to prevent damage.
8. Cara ngungkulan
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Light bar does not power on. | Teu aya catu daya; kabel daya rusak; unitna teu jalan. | Check power connection and outlet. Try a different power cord. If problem persists, contact support. |
| Kadali jauh teu jalan. | Remote battery depleted; obstruction; out of range. | Replace remote battery. Ensure clear line of sight to the light bar's sensor. Operate within 49 ft range. |
| DMX control not functioning. | Incorrect DMX address; faulty DMX cable; incorrect DMX mode. | Verify DMX address setting on the light bar. Ensure DMX cables are 3-pin DMX data cables (not XLR microphone cables). Confirm DMX mode is selected. |
| Lampuna redup atanapi teu konsisten. | Power fluctuation; unit overheating; dirty lens. | Ensure stable power supply. Check for proper ventilation. Clean the light bar lens. |
9. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | AW-SGL000006 |
| Kakuatan | 30 Watt |
| Sumber Cahaya | 252 Pcs LED (RGB) |
| Caang | 2000 Lumén |
| Sudut Beam | 25 darajat |
| Voltage | AC85-265 Volts |
| Ampumur | 0.11 Amps |
| Bahan | Éléh-énggal Aluminium |
| Ukuran produk (L x W x H) | 42.52" x 2.48" x 3.15" (108 cm x 6.3 cm x 8 cm) |
| Item Beurat | 5 pon |
| Modeu kontrol | Auto, DMX, Slave, Flash, Sound/Music |
| Rentang Control Jauh | Nepi ka 49.25 suku (15 méter) |
Image: The AW LED Wall Washer Light Bar used in different environments, showcasing versatility na.
10. Émbaran jaminan
This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase or contact the seller for specific warranty terms and conditions.
11. Rojongan
For technical assistance, troubleshooting, or inquiries regarding your AW 30W 252-LED RGB DMX Wall Washer Light Bar, please contact the seller or manufacturer directly through their official support channels.