Buku Panduan Pangguna Sartorius Cubis Balance MSA2202S100D0

1. Bubuka

This manual provides essential information for the proper installation, operation, and maintenance of your Sartorius Cubis Balance MSA2202S100D0. The Cubis Balance is a precision toploading instrument designed for accurate mass determination in laboratory and industrial settings. It features a high-resolution color TFT touchscreen, integrated software, and advanced functions such as automatic internal calibration (isoCAL) and motorized leveling.

2. Émbaran Kasalametan

Observe the following safety precautions to ensure safe operation and to prevent damage to the balance or injury to personnel:

• Operate the balance only in a stable, level environment free from vibrations and drafts.
• Pastikeun catu daya voltage matches the requirements specified for the balance.
• Ulah ngalaan kasaimbangan kana suhu anu ekstrim, kalembaban, atanapi sinar panonpoé langsung.
• Avoid spilling liquids on the balance. If spills occur, disconnect power and clean immediately.
• Ngan tanaga anu mumpuni kedah ngalaksanakeun pangropéa atanapi perbaikan.

3. Eusi Paket

Pastikeun yén sadaya barang aya sareng henteu ruksak nalika ngabongkar:

• Sartorius Cubis Balance MSA2202S100D0
• Universal power supply with 120V line cord
• Manual Pitunjuk (dokumén ieu)
• Standard factory certificate of conformity to specifications

4. Setélan

4.1 Ngabongkar sareng Nempatkeun

Carefully remove the balance from its packaging. Place the balance on a stable, level, and vibration-free surface. Ensure adequate space around the balance for operation and ventilation. Avoid locations near air conditioning vents, open windows, or heavy machinery that could cause air currents or vibrations.

Figure 1: Sartorius Cubis Balance MSA2202S100D0. This image shows the balance from an angled front view, highlighting the stainless steel weighing pan, the white housing, and the integrated color TFT touchscreen display showing "0.00" g.

4.2 Sambungan Daya

Connect the universal power supply to the balance and then plug the 120V line cord into a suitable electrical outlet. The balance will perform an initial self-test upon power-up.

4.3 Naratas

The Cubis Balance features automatic motorized leveling. Upon initial setup or relocation, the balance will prompt for leveling or can be initiated via the touchscreen interface. Follow the on-screen instructions to ensure the balance is perfectly level for accurate measurements.

4.4 Initial Calibration (isoCAL)

The balance is equipped with isoCAL, a fully automatic internal temperature- and time-controlled calibration function. It is recommended to perform an initial isoCAL cycle after setup and before first use to ensure optimal accuracy. This can be initiated through the balance's menu system.

5. Parentah Operasi

5.1 Panganteur layar rampa

The balance features a 5.7" high-resolution color TFT touchscreen. This interface provides interactive guidance for managing weighing tasks, user settings, and system settings. Basic functions can also be accessed via the physical keypad buttons surrounding the screen.

5.2 Timbangan Dasar

1. Pastikeun panci timbangan bersih sareng kosong.
2. Pencét éta Taré button (if applicable) or use the touchscreen to zero the balance.
3. Taliti nempatkeun sample on the center of the weighing pan.
4. Baca beurat stabil anu ditampilkeun dina layar.
5. Leupaskeun sample.

5.3 Advanced Applications

The Cubis Balance includes 18 built-in applications customizable for complex lab weighing tasks. Access these applications through the touchscreen menu. Examples ngawengku:

• Konversi Unit: Change between various weighing units (g, kg, ct, lb, oz, ozt, grain, dwt, mg, parts per pound, Austrian carat, Newton, lb:oz, microgram).
• SQmin Function: For minimum initial weight according to USP standards.
• Penentuan dénsitas: Calculate the density of samples.
• rumusan: For multi-component weighing processes.
• Ngitung: Determine the number of pieces based on a reference weight.
• Timbangan: Verify if a sample's weight falls within a defined tolerance range.
• Statistik: Perform statistical analysis on a series of weighings.

5.4 Kalibrasi

Regular calibration is crucial for maintaining accuracy.

• isoCAL (Internal Calibration): The balance automatically performs internal calibration based on temperature and time changes. This function can also be manually initiated via the menu.
• Kalibrasi éksternal: The balance supports calibration using external weights. Refer to the on-screen prompts or the detailed menu instructions for the procedure.

5.5 Panganteur Data

The balance offers multiple interfaces for data management:

• Port USB: For connecting to a computer (Windows OS) for data transfer.
• Port RS-232C: For connecting peripheral devices.
• Port Ethernet: Pikeun integrasi jaringan.
• Pamaca Kartu SD: For importing and exporting data.

6. Pangropéa

6.1 beberesih

To clean the balance, disconnect it from the power supply. Use a soft, damp cloth with a mild detergent. Do not use abrasive cleaners or solvents. Ensure no liquids enter the balance housing. The weighing pan can be removed for separate cleaning.

6.2 Perawatan Umum

Protect the balance from dust and debris when not in use. Avoid placing heavy objects on the weighing pan when the balance is off. The balance is IP54 certified, providing protection against dust and water splashes from all directions.

7. Cara ngungkulan

If you encounter issues with your balance, consider the following common solutions:

• Bacaan teu akurat: Check if the balance is level. Perform an isoCAL or external calibration. Ensure the environment is stable and free from drafts or vibrations.
• Tampilan Teu Gawé: Verify the power connection. Ensure the power supply is functioning correctly.
• Balance Not Responding: Try restarting the balance by disconnecting and reconnecting the power.
• Pesen Kasalahan: Refer to the on-screen error codes or the detailed product documentation for specific error interpretations and solutions.

8. Spésifikasi

9. Garansi jeung Rojongan

For warranty information, technical support, or service inquiries, please refer to the official Sartorius website or contact your authorized Sartorius distributor. Keep your purchase receipt and product serial number readily available for support requests.