1. Produk Langkungview
The Laserliner DistanceMaster Compact is a precise laser distance meter designed for accurate length, area, and volume measurements. It features a color display and a robust, ergonomically designed rubber casing, making it suitable for various environments, including construction sites and indoor applications.
Fitur konci:
- Precise point-accurate laser measurement for accurate length determination.
- Area and volume functions for calculating room sizes and material quantities.
- Measured value memory for up to 10 entries.
- Measuring accuracy of ±3 mm up to 25 meters.
- Internal measuring range from 0.1 meters to 25 meters.
- Two selectable reference points for measurement: front and rear.
- Min/Max function for determining diagonals, vertical, and horizontal distances.
- Illuminated three-line color LCD display for clear readability.
- Robust, ergonomically designed rubber casing with IP54 protection against dust and splashing water.
Image 1.1: The Laserliner DistanceMaster Compact laser rangefinder with its protective carrying case. The device features a clear digital display showing measurement readings and battery status.
2. Setélan
2.1 Pamasangan batré
The DistanceMaster Compact requires two AAA batteries for operation. These are typically included with the device.
- Panggihan panutup kompartemen batré di bagian tukang alat.
- Geser atawa cabut panutup panutup pikeun muka kompartemen.
- Pasangkeun dua batré AAA, pastikeun polaritasna (+/-) bener sakumaha anu dituduhkeun di jero kompartemenna.
- Tutup panutup kompartemen batré aman.
2.2 Powering on / Pareum
Pikeun mareuman alat, pencét tombol DIST kancing. Pikeun mareuman, pencét jeung tahan tombol C/OFF kancing.
3. Parentah Operasi
3.1 Pangukuran Jarak Dasar
For a single distance measurement:
- Arah sinar laser dina beungeut target.
- Pencét éta DIST tombol sakali. Jarak anu diukur bakal muncul dina tampilan.
3.2 Aréa jeung Pangukuran Volume
The device can calculate area and volume automatically after taking the necessary measurements.
- Pencét tombol sareng square/cube icon to select area or volume mode.
- Follow the on-screen prompts to measure the required dimensions (length, width, height).
- Legana atanapi volume anu diitung bakal ditampilkeun.
Image 3.1: The laser rangefinder being used to measure dimensions for calculating the area of a wall, illustrating its practical application for material estimation.
3.3 Min/Max Tracking
The Min/Max function allows for continuous measurement, displaying the minimum and maximum distances recorded during a sweep. This is useful for finding diagonals or precise horizontal/vertical distances.
- Pencét jeung tahan tombol DIST MIN/MAX kancing.
- Sweep the device across the desired area. The display will continuously update with the minimum and maximum measured values.
- Pencét DIST MIN/MAX again to stop tracking.
Gambar 3.2: A lengkep view of the control panel, highlighting the 'DIST MIN/MAX' button used for continuous measurement and tracking.
3.4 Pilihan Titik Réferénsi
The measurement reference point can be switched between the front and rear of the device. This is important for accurate measurements depending on where the device is placed.
- Pencét tombol sareng ikon panah to toggle between front and rear reference points. The active reference point will be indicated on the display.
Image 3.3: The laser rangefinder in use, demonstrating a distance measurement across a room, emphasizing the importance of selecting the correct reference point.
3.5 Fungsi Mémori
The device can store up to 10 measured values. To access or clear the memory, refer to the on-screen menu or specific button combinations detailed in the full manual (not provided here).
4. Pangropéa
4.1 beberesih
- Ngusap alat ku lemes, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
- Jaga lénsa laser tetep bersih sareng bébas tina lebu atanapi kokotor pikeun mastikeun pangukuran anu akurat.
4.2 Panyimpenan
- Simpen alat dina wadah pelindungna nalika henteu dianggo.
- Cabut batré upami alat moal dianggo kanggo waktos anu panjang pikeun nyegah bocor.
- Simpen dina tempat anu garing, jauh tina suhu anu ekstrim.
5. Cara ngungkulan
- Alat teu hurung: Check battery polarity and ensure batteries are not depleted. Replace if necessary.
- Pangukuran anu teu akurat: Ensure the laser lens is clean. Verify the correct reference point is selected. Avoid measuring through transparent surfaces or highly reflective materials.
- Masalah tampilan: Upami tampilanna taram atanapi kedip-kedip, gentos batréna.
6. Spésifikasi
Image 6.1: The vibrant color LCD display of the DistanceMaster Compact, designed for clear visibility of measurements and functions.
| Fitur | Spésifikasi |
|---|---|
| Nomer modél | 080.936A |
| Rentang Ukur | 0.1 m nepi ka 25 m (0.3 ft nepi ka 82 ft) |
| Akurasi | ± 3 mm |
| Unit ukur | Méter (m), Kaki (ft), Inci (inci) |
| Kelas laser | 2 |
| Panjang gelombang | 650 nm |
| Memory Records | 10 |
| tampilan | Illuminated 3-line color LCD |
| Sasayogian tanaga | 2 x Batré Alkali AAA (kaasup) |
| Suhu Operasi | -10 °C nepi ka 40 °C (14 °F nepi ka 104 °F) |
| Peunteun panyalindungan | IP54 (debu sareng cai percikan ditangtayungan) |
| Bahan | Rubber casing |
| Warna | Hideung, Bodas |
| Dimensi produk | 110 mm (H) x 43 mm (W) x 27 mm (D) |
| Beurat produk | 100 gram |
Image 6.2: The robust design of the laser rangefinder, featuring anti-shock rubber for durability and protection in demanding environments, indicated by the IP54 rating.
7. Garansi jeung Rojongan
For warranty information, technical support, or service inquiries regarding your Laserliner DistanceMaster Compact, please refer to the official Laserliner websitus atanapi ngahubungan departemén layanan palanggan maranéhna. Simpen resi pameseran anjeun salaku bukti pameseran pikeun klaim garansi.
Pikeun pitulung salajengna, anjeun tiasa nganjang ka Laserliner official websitus.
