WarmlyYours Ember Glass 800W Radiant Panel Heater (24 x 47 in., Black)

1. Bubuka

The WarmlyYours Ember Radiant Panel Heater provides efficient infrared heating for indoor spaces. Unlike traditional convection heaters that warm the air, this panel directly heats surfaces and objects, allowing for longer-lasting and more even warmth. This method results in a comfortable feeling even at lower ambient air temperatures. The Ember panel can serve as a primary or supplementary heating source and is designed for wall or ceiling mounting.

fitur konci ngawengku:

• Ultra-Efficient Infrared Heating: Delivers 99% infrared efficiency, directly warming people and objects.
• Sleek Glass Panel Design: Modern Glass Black finish with a slim 0.98-inch profile pikeun instalasi témbok.
• Whisper-Quiet & Allergy-Friendly: Operates silently with no moving parts, preventing dust and allergen circulation.
• Setup fleksibel: Can be used as a plug-in unit or hardwired for a seamless look.
• Aman & Disertipikasi: cTUVus certified for safety, with an average surface temperature of 194°F and a 248°F safety limit.

2. Émbaran Kasalametan

Mangga baca sareng pahami sadaya pitunjuk kaamanan sateuacan masang atanapi ngoperasikeun pemanas ieu. Gagal nuturkeun pitunjuk ieu tiasa nyababkeun sengatan listrik, kahuruan, karusakan harta benda, atanapi cilaka pribadi.

• Always ensure the heater is properly grounded.
• Do not cover the heater while it is in operation.
• Keep flammable materials (e.g., furniture, curtains, bedding) at least 3 feet (0.9 meters) from the front of the heater.
• Ulah ngoperasikeun manaskeun mana wae ku kabel ruksak atawa colokan, atawa sanggeus manaskeun malfunctions atawa geus turun atawa ruksak ku cara naon baé.
• Ulah make di luar. manaskeun ieu dimaksudkeun pikeun pamakéan indoor wungkul.
• The heater's surface can become hot. Keep children and pets away from the heater to avoid burns.
• Mastikeun suplai listrik cocog voltage requirements of the heater (120 Volts).
• For hardwired installations, consult a qualified electrician.

3. Eusi Paket

Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:

• WarmlyYours Ember Glass Radiant Panel Heater (24 x 47 in., Black)
• Citakan Pamasangan
• Pemasangan Hardware (sekrup, jangkar dinding)
• Felt Pads with Self-Adhesive Backing
• Power Cord (9-foot, with removable plastic cover for plug)

4. Setup jeung Instalasi

This section provides detailed instructions for mounting your Ember Radiant Panel Heater. Ensure you have basic tools such as a hammer, drill, level, and pencil.

4.1. Perencanaan Instalasi

Determine the desired location for your heater on the wall. The installation template is the same size as the unit, allowing you to visualize its appearance. Note the position of the power connection box on the template, as this is where the power cord will exit.

4.2. Using the Installation Template

1. Attach the installation template to the wall using the self-adhesive stickers on its back.
2. Use a level to ensure the template is perfectly horizontal or vertical, depending on your desired orientation. Secure one end with tape, adjust the other end until level, and then secure it.
3. Identify the correct mounting holes on the template based on your desired orientation (vertical or horizontal). For vertical mounting, use the green holes. For horizontal mounting, use the yellow holes.
4. Using one of the provided screws, gently tap through the center of each marked hole on the template with a hammer to create a small indentation on the wall.
5. Carefully remove the template from the wall.

4.3. Drilling and Anchoring

1. Bor opat liang dina lokasi anu ditandaan.
2. Insert the supplied wall anchors into the drilled holes. If you cannot locate a wall stud, use all four wall anchors.
3. Screw the supplied screws into the anchors. Adjust each screw so that it protrudes 15mm (19/32") from the wall.

4.4. Attaching Felt Pads

The hardware kit includes four felt pads with self-adhesive backing. These pads prevent the unit from scratching the wall.

1. Peel off the backing from each felt pad.
2. Place each pad onto the mounting base of the heater, aligning the cross-hatch with the corresponding area on the base.

4.5. Pamasangan manaskeun

It is recommended to have a helper for this step.

1. Carefully lift the Ember panel. Align the slots on the back of the heater with the protruding screws on the wall.
2. Slide the heater down onto the screws until it is securely seated.

4.6. Sambungan Daya

The heater comes with a 9-foot power cord for plug-in operation. For a hardwired installation, the plug can be removed by a qualified electrician.

• For plug-in use: Remove the plastic cover from the power cord plug and insert it into a nearby electrical outlet.
• For hardwired installation: Consult a qualified electrician to remove the plug and hardwire the unit according to local electrical codes.

4.7. Pituduh Pidéo Instalasi

For a visual guide on the installation process, please refer to the official video:

5. Parentah Operasi

The WarmlyYours Ember Radiant Panel Heater operates with a single speed (on/off). It does not include an integrated thermostat, allowing for flexible control options.

• Hurungkeun/Pareuman: Once connected to power (either plugged in or hardwired), the unit will begin to heat. Disconnect from power or use an external control device to turn off.
• External Thermostat (Recommended): For precise temperature control and energy management, it is highly recommended to use an external plug-in thermostat or a hardwired thermostat (if hardwired). This allows you to set desired temperatures and schedules.
• Direct Warming: The heater warms objects and surfaces directly. You may feel comfortable even if the ambient air temperature is slightly lower than with convection heating.

5.1. Produk Langkungview Video

Learn more about the features and benefits of the Ember Radiant Panels:

6. Pangropéa

The WarmlyYours Ember Radiant Panel Heater is designed for low maintenance. Follow these guidelines for optimal performance and longevity:

• beberesih: Ensure the heater is unplugged or disconnected from power before cleaning. Wipe the glass surface with a soft, damp lawon. Ulah make cleaners abrasive atawa pangleyur.
• Pamariksaan: Periodically inspect the power cord (if plug-in) for any signs of damage. If damage is found, discontinue use and contact customer support.
• No Moving Parts: As there are no moving parts, there are no filters to clean or mechanical components to lubricate.

7. Cara ngungkulan

If your Ember Radiant Panel Heater is not operating as expected, please refer to the following common issues and solutions:

• Pemanas henteu hurung:
  • Check if the unit is properly plugged into a working outlet or if the hardwired connection is secure.
  • If using an external thermostat, ensure it is powered on and set to a temperature above the current room temperature.
• Panas teu cekap:
  • Verify that the heater's wattage is appropriate for the room size (refer to Specifications section).
  • Ensure there are no obstructions blocking the radiant heat.
  • Infrared heat warms objects directly; the ambient air temperature may feel cooler than expected.
• Sora anu teu biasa:
  • The heater operates silently due to no moving parts. If you hear unusual noises, disconnect power immediately and contact customer support.

If troubleshooting steps do not resolve the issue, please contact WarmlyYours Customer Support.

8. Spésifikasi

8.1. Heating Coverage Chart

Refer to this chart to understand the warming coverage based on radiant panel wattage:

Image: Heating Coverage Chart. This table details the warming coverage in square feet for various Ember radiant panel wattages, kaasup 300W, 500W, 600W, 700W, jeung 800W.

8.2. Product Dimensions Diagram

A visual representation of the product's dimensions:

Image: Dimensions Diagram. This diagram illustrates the height, width, and depth of the Ember Radiant Panel Heater, along with the placement of its mounting brackets.

9. Asesoris

Enhance the functionality and versatility of your Ember Radiant Panel Heater with optional accessories:

• Towel Bars: Convert your vertically mounted panel into a towel warmer. Towel bars must be purchased separately.
• Ceiling Mounting Kit: Allows for ceiling installation of the radiant panel. Must be purchased separately.

10. Jaminan & Dukungan

The WarmlyYours Ember Radiant Panel Heater is backed by a 5-year warranty for peace of mind.

For any questions, technical assistance, or warranty claims, please contact WarmlyYours Customer Support.

Inpormasi kontak:

• Telepon: (800) 875-5285
• Websitus: www.WarmlyYours.com