1. Bubuka
This manual provides essential information for the proper installation, operation, and maintenance of your Phillips 549 ABL Mortise Lock. This lock is specifically designed for use with aluminum door profiles and is suitable for both residential and commercial applications. Please read these instructions carefully before proceeding with installation or use to ensure optimal performance and safety.
2. Émbaran Kasalametan
- Salawasna nganggo alat pelindung diri (APD) anu merenah sapertos kacamata kaamanan sareng sarung tangan nalika pamasangan.
- Ensure the door frame and door are structurally sound and capable of supporting the lock mechanism.
- Keep small components out of reach of children to prevent choking hazards.
- Do not attempt to modify the lock mechanism, as this may compromise its security and void the warranty.
- If you are unsure about any step of the installation process, consult a qualified locksmith or professional installer.
3. Eusi Paket
Pariksa yén sadaya komponén aya sateuacan ngamimitian pamasangan:
- Phillips 549 ABL Mortise Lock Assembly
- Keys (set of 2 or more)
- Manual Instalasi (dokumén ieu)
- Pamasangan screws
Image 3.1: The Phillips 549 ABL Mortise Lock assembly, showing the main body, handles, and key cylinder.
4. Setup jeung Instalasi
The Phillips 549 ABL Mortise Lock is designed for installation into aluminum door profiles. Detailed installation instructions are typically provided with the product. The following steps outline the general procedure:
- Nyiapkeun lawang: Ensure the aluminum door profile has the correct mortise cutout for the lock body and appropriate holes for the spindle, key cylinder, and mounting screws. Refer to the provided template (if included) for precise measurements.
- Insert the Mortise Body: Slide the main lock body into the prepared mortise cutout in the door edge. Secure it with the provided screws through the faceplate.
- Install the Key Cylinder: Insert the key cylinder through the designated hole in the door and into the lock body. Secure it with the cylinder screw from the door edge.
- Attach the Handles/Levers: Mount the interior and exterior handles/levers onto the spindle, ensuring they operate smoothly. Secure them with the appropriate screws.
- Pasang Strike Plate: Mark and chisel out the recess for the strike plate on the door frame, aligning it with the latch and deadbolt. Secure the strike plate with screws.
- Operasi tés: Close the door and test the lock's functionality. Ensure the latch retracts smoothly, the deadbolt extends and retracts fully, and the key operates both mechanisms without binding.
Gambar 4.1: Diménsi view of the lock, indicating a height of approximately 14 cm (5.8 inches).
5. Parentah Operasi
To operate your Phillips 549 ABL Mortise Lock:
- To Open from Outside: Insert the key into the keyhole and turn it to retract the deadbolt and/or latch. Turn the handle/lever to open the door.
- To Open from Inside: Turn the handle/lever to retract the latch. If the deadbolt is engaged, turn the thumb-turn (if present) or use the key to retract it, then turn the handle/lever.
- Pikeun Ngonci ti Luar: Close the door. Turn the key to extend the deadbolt into the strike plate. Remove the key.
- Pikeun Ngonci ti Jero: Close the door. Turn the thumb-turn (if present) or use the key to extend the deadbolt into the strike plate.
6. Pangropéa
Regular maintenance ensures the longevity and smooth operation of your lock:
- beberesih: Usap permukaan luar konci ku kaén nu lemes,amp lawon. Hindarkeun pembersih abrasive atanapi pangleyur anu tiasa ngaruksak finish.
- Lubrication: Periodically (e.g., once a year), apply a small amount of graphite-based lubricant or a silicone-free lock lubricant into the keyway and moving parts of the latch and deadbolt mechanism. Do not use oil-based lubricants, as they can attract dirt and dust.
- Kencangkeun screws: Check all mounting screws periodically and tighten them if they have become loose.
- mariksa: Regularly inspect the lock for any signs of wear, damage, or misalignment.
7. Cara ngungkulan
If you encounter issues with your lock, refer to the following common problems and solutions:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Koncina hésé diasupkeun atawa dibalikkeun | Dirty keyway, worn key, or internal mechanism friction. | Clean keyway with compressed air. Lubricate keyway with graphite lubricant. Try a spare key. |
| Latch or deadbolt does not retract/extend smoothly | Misalignment with strike plate, dirt in mechanism, loose screws. | Check strike plate alignment and adjust if necessary. Clean and lubricate the mechanism. Tighten all mounting screws. |
| Handle/lever is loose or wobbly | Loose set screws or mounting screws. | Locate and tighten the set screws on the handle/lever. Tighten the main mounting screws. |
| Panto henteu nutup leres-leres | Misaligned strike plate or door hinges. | Adjust the strike plate position. Check and adjust door hinges if necessary. |
If the problem persists after attempting these solutions, contact customer support or a qualified locksmith.
8. Spésifikasi
| Fitur | Spésifikasi |
|---|---|
| Produsén | ASSA ABLOY |
| Nomer Bagian | 549 ABL |
| Gaya | Security and Resistance |
| Bérés | Bodas |
| Bahan | alumunium |
| Item Paket Kuantitas | 1 |
| Jumlah Potongan | 1 |
| Fitur husus | For aluminum doors |
| Batré Diperlukeun? | No |
| Panjangna | 13 séntiméter |
| Lebar | 5 séntiméter |
| Jangkungna | 15 séntiméter |
| Ukuran produk (L x W x H) | 13 x 5 x 15 cm |
| Beurat | 600 g |
| Tipe Konci | Konci konci |
9. Émbaran jaminan
Specific warranty details for the Phillips 549 ABL Mortise Lock are typically provided with the product packaging or can be found on the official Phillips or ASSA ABLOY website. Please retain your proof of purchase for warranty claims. The warranty generally covers manufacturing defects under normal use conditions. Damage resulting from improper installation, misuse, or unauthorized modifications is usually not covered.
10. Rojongan
For technical assistance, installation queries, or warranty support, please contact Phillips customer service or visit their official websitus. Inpormasi kontak biasana tiasa dipendakan dina bungkus produk atanapi produsén websitus.
Nalika ngahubungi dukungan, punten siapkeun inpormasi ieu:
- Product Model: Phillips 549 ABL
- Tanggal Meuli
- Pedaran ngeunaan masalah
