Marantz SD-60 3-Head Cassette Deck

1. Bubuka

Hatur nuhun pikeun meuliasing the Marantz SD-60 3-Head Cassette Deck. This manual provides essential information for the proper setup, operation, and maintenance of your device. Please read it thoroughly before use to ensure optimal performance and longevity of your cassette deck.

Gambar 1: Hareupeun view of the Marantz SD-60 3-Head Cassette Deck. This image shows the main unit with its controls and display.

2. Émbaran Kasalametan

Pikeun nyegah kejutan listrik, kahuruan, atanapi karusakan kana unit, mangga perhatoskeun tindakan pencegahan kaamanan ieu:

• Ulah ngalaan unit ka hujan atawa Uap.
• Ulah muka lomari. Rujuk ngalayanan ka tanaga anu mumpuni wungkul.
• Mastikeun ventilasi ditangtoskeun; ulah ngahalangan bukaan ventilasi.
• Use only the specified power supply (AC100V, 50Hz/60Hz).
• Unplug the unit from the wall outlet if it will not be used for a long period.
• Hindarkeun nempatkeun unit caket sumber panas atanapi dina sinar panonpoé langsung.

3. Setélan

3.1 Ngabongkar bungkusan

Carefully remove the cassette deck from its packaging. Retain all packing materials for future transport or storage. Check that all accessories are present.

3.2 Nempatkeun

Place the unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust or humidity. Ensure adequate space around the unit for proper ventilation. The side panels are constructed from die-cast material for vibration damping.

3.3 Sambungan

Before making any connections, ensure the unit and all connected components are powered off.

• Sambungan Daya: Connect the power cord to the AC INlet on the rear panel and then to a standard AC100V, 50Hz/60Hz wall outlet.
• Input Audio: Connect your audio source (e.g., CD player, receiver) to one of the three available input terminals on the rear panel using RCA cables. This unit supports direct recording.
• Kaluaran Audio: Connect the Line Out terminals to your amplifier or receiver's input using RCA cables. Both fixed and variable output terminals are provided.
• Headphone: For private listening, connect headphones to the headphone jack on the front panel.

4. Parentah Operasi

4.1 Playback Dasar

1. Pencét éta EJECT tombol pikeun muka kompartemen kaset.
2. Insert a cassette tape with the open edge facing forward.
3. Tutup kompartemen kasét.
4. Select the appropriate tape type (Normal, Chrome, Metal) using the TAPE TYPE pamilih.
5. Pencét éta ulin tombol pikeun ngamimitian playback.
6. Saluyukeun volume on Anjeun amplifier atawa panarima.
7. Pikeun ngeureunkeun putereun deui, pencét éta EUREUN kancing.
8. Ngagunakeun éta NGUNDUH BALIK jeung MAJU CEPAT tombol pikeun nganapigasi tape.

4.2 Ngarékam

1. Insert a recordable cassette tape.
2. Select the desired input source using the PEMILIH INPUT.
3. Pencét éta Reureuh tombol lajeng nu RECORD button simultaneously to enter record-pause mode.
4. Start playing your audio source.
5. Saluyukeun tingkat rékaman ngagunakeun TINGKAT REC control. Monitor the digital peak level indicator to ensure levels do not exceed 0dB to avoid distortion. The MAX peak level memory function can assist in setting optimal levels.
6. Pencét éta Reureuh button again to begin recording.
7. Pikeun ngeureunkeun rékaman, pencét éta EUREUN kancing.

4.3 Dolby Noise Reduction

The SD-60 features Dolby B and Dolby C noise reduction systems to reduce tape hiss during recording and playback.

• Pencét éta DOLBY NR button to cycle through OFF, Dolby B, and Dolby C modes.
• Use Dolby B for moderate noise reduction.
• Use Dolby C for stronger noise reduction, especially with tapes recorded with Dolby C.
• The unit also incorporates Dolby HX PRO, which dynamically controls bias levels to improve high-frequency recording linearity.

4.4 Fungsi Maju

• Linear Counter: Displays recording/playback time in minutes and seconds. It can switch between two modes.
• Mode Character Display: Provides clear indication of current operating mode.
• QMS (Quick Music Sensor): Allows quick access to the beginning of a track.
• AMS (Auto Music Scan): Plays the intro (approx. 10 seconds) of each track sequentially.
• Ulang Playback: Enables continuous playback of the current track.
• Blank Skip: Automatically fast-forwards through silent sections during tape playback.
• Auto Tape Selector: Automatically detects the type of tape inserted.
• REC Calibration: Allows fine-tuning of recording bias for optimal performance with different tape types.
• Cassette Indicator / Anti-Lock Indicator: Provides visual feedback on tape status and operational locks.

5. Pangropéa

Regular maintenance ensures optimal sound quality and extends the life of your cassette deck.

5.1 Cleaning Heads and Tape Path

Dust and tape residue can accumulate on the heads, capstan, and pinch rollers, leading to poor sound quality. Clean these components after every 10-20 hours of use, or if you notice a drop in performance.

1. Buka kompartemen kasét.
2. Using a cotton swab lightly moistened with isopropyl alcohol, gently clean the surfaces of the record/playback head, erase head, capstan, and pinch rollers.
3. Allow the components to dry completely before inserting a tape.

5.2 Demagnetization

Over time, the heads can become magnetized, causing increased noise and reduced high-frequency response. Demagnetize the heads periodically (e.g., every 50-100 hours of use) using a tape head demagnetizer. Follow the demagnetizer's instructions carefully.

5.3 beberesih umum

Ngusap bagian luar unit nganggo kaén anu lembut sareng garing. Ulah make cleaners abrasive atawa pangleyur.

6. Cara ngungkulan

If you experience problems with your Marantz SD-60, consult the following table before seeking professional service.

7. Spésifikasi

The following are the technical specifications for the Marantz SD-60 3-Head Cassette Deck:

8. Garansi jeung Rojongan

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Marantz websitus. Simpen resi pameseran anjeun salaku bukti pameseran.

Dukungan Online: www.marantz.com/en-us/support