Produk Leuwihview
The Altronix PACE1PTM is a compact Power over Ethernet (PoE) Transceiver designed to extend network and power connectivity over long distances. It is specifically engineered for use with PoE cameras, IP devices, routers, and other network equipment, providing a reliable solution for various surveillance and networking applications. This device facilitates the transmission of data and power over a single Ethernet cable, simplifying installation and reducing cabling requirements.
Figure 1: The Altronix PACE1PTM PoE Transceiver. This image displays the top and front view of the device, highlighting its two Ethernet ports, a terminal block for power input, and indicator LEDs for network activity and power status. The device is black with white Altronix branding and model number PACE1PTM visible on the top surface.
Setup sareng Instalasi
Follow these steps for proper installation of your PACE1PTM PoE Transceiver:
- Sambungan Daya: Connect the appropriate power source to the terminal block labeled "Input" on the transceiver. Ensure the power supply meets the requirements for your PoE devices.
- Network Connection (Input): Connect an Ethernet cable from your network router, switch, or NVR to the Ethernet port labeled "Input" on the PACE1PTM. This port receives data and power.
- Device Connection (Output): Connect an Ethernet cable from the Ethernet port labeled "Output" on the PACE1PTM to your PoE-enabled camera, IP device, or other network equipment. This port delivers both data and PoE to the connected device. The PACE1PTM supports one camera input.
- Pariksa sambungan: Ensure all cables are securely connected. The unit is designed for simple plug-and-play operation once connections are established.
Catetan: Always ensure power is disconnected before making or changing any connections to prevent damage to the unit or connected devices.
Parentah Operasi
The PACE1PTM operates automatically once properly connected and powered. Observe the LED indicators for operational status:
- Green LED (Power and PoE): This LED illuminates when the unit is receiving power and providing Power over Ethernet (PoE) to the connected device. A solid green light indicates normal operation.
- Green LED (Speed): This LED indicates the network speed of the connection. It will illuminate to show 10/100 Mbps or Gigabit speeds, depending on the network environment.
- Yellow LED (Activity): This LED flashes to indicate network data activity. A blinking yellow light signifies active data transmission.
The transceiver passes PoE/PoE+ standards, ensuring compatibility with a wide range of PoE-compliant devices.
Pangropéa
The Altronix PACE1PTM PoE Transceiver is designed for minimal maintenance. To ensure optimal performance and longevity:
- beberesih: Periodically wipe the exterior of the unit with a soft, dry cloth. Do not use liquid cleaners or aerosol sprays.
- Lingkungan: Ensure the unit is operated within its specified environmental conditions (temperature, humidity) and in a well-ventilated area to prevent overheating.
- Integritas kabel: Pariksa sacara rutin sadaya kabel anu nyambung pikeun ningali tanda-tanda karusakan atanapi karusakan. Ganti kabel anu ruksak langsung.
Awas: Do not attempt to open the unit. There are no user-serviceable parts inside. Opening the casing may void the warranty.
Pamérésan masalah
If you encounter issues with your PACE1PTM, refer to the following troubleshooting guide:
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| No Power/No LEDs Lit | Taya catu daya disambungkeun atawa catu daya lepat / kabel. | Check power connections. Ensure power supply is functional and meets voltage syarat. |
| No Network Activity (Yellow LED off) | Faulty Ethernet cable, incorrect connection, or issue with connected network device. | Verify Ethernet cable connections. Test with a known good cable. Check the status of the connected router/switch and IP device. |
| No PoE to Device (Green Power LED off) | Connected device is not PoE-compatible, or power supply is insufficient. | Ensure the connected device is PoE-compliant. Verify the power supply provides adequate power for the transceiver and the PoE device. |
| Sambungan Intermittent | Loose cable connections or environmental interference. | Secure all cable connections. Ensure the unit is not near strong electromagnetic interference sources. |
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | PACE1PTM |
| Produsén | ALTRONIX |
| Jenis produk | PoE Transceiver |
| Input kaméra | 1 |
| Ukuran (W x H x D) | 3.5 inches x 1 inch x 3.5 inches (approximate) |
| Bahan | palastik |
| Beurat | 5.11 ounces (approximate package weight) |
| Kasaluyuan | Routers, PoE Cameras, IP Devices, Other Network Equipment |
| Standar Poe | Passes PoE/PoE+ |
Garansi sareng Rojongan
For detailed warranty information regarding your Altronix PACE1PTM PoE Transceiver, please refer to the official Altronix websitus atanapi ngahubungi dukungan palangganna sacara langsung. Sarat sareng katangtuan garansi tiasa bénten-bénten.
Should you require technical assistance or have questions not covered in this manual, please contact Altronix customer support. Contact information can typically be found on the manufacturer's official websitus atanapi bungkusan produk.
