Bubuka
Thank you for choosing the Lumitec Lighting NevisLT Light. This manual provides essential information for the safe installation, operation, and maintenance of your new light. Please read these instructions thoroughly before installation and keep them for future reference.
The NevisLT is designed to provide bright, even illumination with a 180-degree spread, ideal for hard-to-light areas. It is certified as ignition protected and compatible with most PWM LED dimmers.
Émbaran Kasalametan penting
WARNING: Failure to follow these safety instructions could result in fire, electric shock, serious injury, or property damage.
- Always disconnect power before installing or servicing the light.
- Pamasangan kedah dilaksanakeun ku teknisi anu mumpuni luyu sareng sadaya kode listrik lokal sareng nasional.
- Pastikeun sumber kakuatan voltage matches the light's requirements (12 Volts).
- Do not modify the light in any way. Unauthorized modifications will void the warranty and may create safety hazards.
- This product is designed for marine and industrial use. Ensure proper sealing and mounting for the intended environment.
- Avoid direct eye exposure to the light when it is operating, as it is very bright (1000 Lumens).
Naon dina Box
Saatos muka bungkusan, mangga pariksa yén sadaya komponén aya sareng henteu ruksak:
- Lumitec Lighting 101296 NevisLT Light, White
- Mounting Hardware (e.g., screws, gaskets)
- Citakan Instalasi (upami aya)

Image: The Lumitec Lighting 101296 NevisLT Light, White. This image shows the compact design of the light fixture, typically used in marine or industrial settings.
Parentah instalasi
- Nyiapkeun Surface Mounting: Choose a flat, stable surface for mounting. Ensure there is sufficient space for the light and its wiring.
- Tandaan Lubang Pasang: Use the provided template (if included) or the light fixture itself to mark the locations for drilling mounting holes.
- liang bor: Carefully drill pilot holes for the mounting screws. Ensure not to drill too deep to avoid damaging underlying structures.
- Wiring:
- Disconnect all power to the circuit before beginning wiring.
- Connect the positive (+) wire from the power source to the positive wire of the light.
- Connect the negative (-) wire from the power source to the negative wire of the light.
- Ensure all connections are secure and properly insulated to prevent short circuits and corrosion, especially in marine environments.
- If using a PWM LED dimmer, connect it according to the dimmer's instructions.
- Pasang Lampu: Secure the light fixture to the mounting surface using the provided screws. Do not overtighten.
- Fungsi Uji: Restore power to the circuit and test the light's operation.
For detailed wiring diagrams or specific marine electrical standards, consult a professional marine electrician.
Parentah Operasi
The Lumitec NevisLT Light is designed for straightforward operation.
- Hurungkeun/Pareuman: The light is controlled by an external switch connected to its power supply. Toggle the switch to turn the light on or off.
- Dimming (upami aya): If connected to a compatible PWM LED dimmer, adjust the dimmer control to vary the light intensity.
- Color Selection (if applicable for multi-color models): This specific model (101296) is a white light. For multi-color Nevis models, cycling the power switch typically changes the color output.
The NevisLT provides a wide 180-degree spread of bright, even light, making it suitable for illuminating large areas.
Pangropéa
The Lumitec NevisLT Light is designed for durability and requires minimal maintenance.
- beberesih: Periodically clean the lens and housing with a soft cloth and mild soap and water. Avoid abrasive cleaners or solvents that could damage the finish or lens.
- Pamariksaan: Regularly inspect the wiring and connections for any signs of corrosion, wear, or damage, especially in harsh marine environments. Address any issues promptly.
- anjing laut: Ensure that all seals and gaskets remain intact to maintain the light's water resistance.
No user-serviceable parts are inside the sealed unit. Do not attempt to open the light fixture.
Pamérésan masalah
| Masalah | Mungkin Cukang lantaranana | Solusi |
|---|---|---|
| Lampu henteu hurung. | Teu aya kakuatan kana cahaya. Sambungan kabel anu lepat. Sekering ditiup atanapi breaker tripped. | Check power supply and switch. Pariksa sadaya sambungan kabel naha aya anu kendur atanapi korosi. Check and replace fuse or reset breaker. |
| Lampu kedip-kedip atanapi taram. | Vol handaptage. Sambungan goréng. Dimmer teu cocog. | Pariksa bener voltage at the light. Tighten sadaya sambungan listrik. Ensure dimmer is compatible with LED lights. |
| Light turns on but then turns off. | Overheating (unlikely for LED, but possible in extreme conditions). Intermittent power supply. | Pastikeun ventilasi nyukupan sabudeureun lampu. Pariksa stabilitas sumber kakuatan. |
If troubleshooting steps do not resolve the issue, contact Lumitec customer support or a qualified technician.
spésifikasi
| Fitur | Rincian |
|---|---|
| Nomer modél | 101296 |
| merek | Lumitec |
| Kaluaran cahaya | 1000 Lumén |
| Warna | Bodas |
| Voltage | 12 volt |
| Wattage | 12 watt |
| Dimensi produk | 7 x 4 x 4 inci |
| Item Beurat | 12.7 ons |
| Fitur husus | Ignition dijagaan |
| Mangpaat husus | Industrial, Marine |
| GTIN (UPC) | 089300012968 |
Émbaran jaminan
Lumitec offers an extended 5-Taun Garansi across its complete line of extreme environment LED products, including the NevisLT Light. This warranty covers defects in materials and workmanship under normal use.
For warranty claims or detailed terms and conditions, please visit the official Lumitec websitus atanapi ngahubungan rojongan customer.
Rojongan Palanggan
If you have any questions, require technical assistance, or need to report an issue, please contact Lumitec customer support:
- Websitus: www.lumiteclighting.com
- Telepon: Refer to the Lumitec websitus pikeun nomer kontak ayeuna.
- Surélék: Refer to the Lumitec website for current contact email addresses.
Please have your product model number (101296) and purchase date available when contacting support.





